|
Back to
BMW Products
|
|
BMW X3
(2004-2008)
|
|
|
 |
Premium Rotors
|
 |
SportStop Rotors
|
Better than stock rotors! Centric Premium rotors are identical in
dimensions and internal vane design to the factory originals. During assembly,
rotors are straddle cut for the most accurate machining, then double disc ground
for optimum parallelism, minimal runout, and near zero thickness variation.
A non-directional finish is applied for better initial pad bedding. All
surfaces, including the hat, are machined and non-swept surfaces are electrostatically coated with a durable, black finish
(unless noted otherwise below) for corrosion protection
and good looks. Finally, all rotors are computer mill balanced to
incredibly tight tolerances. You won't find a better replacement rotor
anywhere. Click here for more details.
(Note: Centric is the parent
company of StopTech and PowerSlot. All StopTech SportStop and Power Slot
rotors start as Centric Premium blanks and are machined in-house on computer
controlled milling machines.)
StopTech SportStop rotors are available for
many applications, offering all the advantages of Centric Premium rotors, with
the addition of slotting and/or drilling. Slotted rotors provide additional bite and maintain
consistent friction level over the life of your pads. These are ideal
for aggressive street and even road racing applications. Slotted and drilled
rotors offer even more bite and stunning looks, but should be used on the street and not for racing. If you prefer slotted
or slotted and drilled rotors and there is no pricing listed below, send an inquiry to
orders@zeckhausen.com and we can let you know if they are available.
Make sure you install them properly. See:
How to Properly Install Plain,
Slotted or Drilled Rotors
To obtain more information about any rotor, you
may click on the part number (if a link is present) to see more details,
including rotor drawings, recommended replacement thickness, critical
dimensions, and weight. Note: The term "floating" in the rotor
description does not mean two-piece, floating rotor. It is Centric's terminology for a
rotor that can be removed without also removing the car's wheel bearings or hubs.
To order, click here:
 and then locate your vehicle
along the left side of the on-line store page. Or, feel free to call us at
(800)222-8893 for help selecting the proper parts.
|
 |
Front 325mm x 25mm
1-piece vented rotors
Rear
320mm x 22mm
1-piece vented rotors
|
$89 Each
$87 Each |
120.34075
120.34076 |
|
High-Performance Brake Pads
for stock brakes |
|
If you want better brake pads
for the street, consider Axxis. Axxis pads are
manufactured by
Bendix Mintex (FMP Group Pty. Ltd.) in Australia. Formerly marketed under the
brand names PBR and Repco, they are now sold in the United States under the
Axxis name.
Axxis Brake pad performance
comparison charts
Instructions
for bedding in new brake pads
To order, click here:
and then locate your vehicle
along the left side of the on-line store page. Or, feel free to call us at
(800)222-8893 for help selecting the proper parts.
|
|
 |
Axxis Deluxe Advanced street
pads (formerly called Deluxe Plus) are ideal if you are looking for a low dust pad that is quiet and rotor friendly, yet has
enough fade resistance for
performance cars. These ceramic-enhanced organic pads work well up to 716
°F, similar to OEM pads.
Stop washing brake dust off your wheels every few days! These are by far our most
popular street pads.
|
F-$58
R-$40 |
63-213-0725
63-213-0683 |
|
 |
Axxis ULT street pads
pads (formerly called Axxis Ultimate) use a Kevlar®
and ceramic formula for enhanced performance. They produce maximum
friction when cold, yet have tremendous fade resistance up to 932 °F. The
coefficient of friction is high enough to produce a noticeable reduction in
pedal effort. Fine for autocross or your first
track event, assuming street tires and a low horsepower car. This is
Zeckhausen Racing's favorite high performance street pad.
|
F-$98
R-$59 |
63-223-0725
63-223-0683 |
|
 |
Centric Posi Quiet Semi-Metallic pads
offer a high friction level across a wide temperature range. Very low dust, low noise
w/OE designed composite shims to reduce pad vibration and squeal. Easy on rotors.
Better performance than typical low-dust pads. Give up the dust
without giving up the performance.
|
F-$55
R-$39
|
63-104-0725
63-104-0683
|
|
Replacement Brake Pad Wear Sensors |
|
BMW uses brake pad wear sensors to
monitor the condition of your brake pads. Although your BMW has eight
brake pads, only two of them are monitored for wear - the driver's side
front inboard pad and the passenger's side rear inboard pad.
Thus, you should only order one front and one rear
sensor. When a monitored pad has worn down below 2mm of
remaining friction material, the rotor chews through a small plastic bump on
the sensor and slices a wire in half. This causes an open circuit,
triggering a warning on your dash, either an idiot light or a "CHECK BRAKE
LININGS" text message. Once a warning has appeared, the sensor has
been destroyed and must be replaced.
Each Centric brand replacement sensor comes
with a short wire harness that clips into your BMW's main wiring harness.
The other end (shown below in the enlarged gray box) clips into a slot at
the top of your new brake pad, with the small plastic bump facing TOWARD the
rotor.
E46 M3 sensor shown - your BMW model's
sensor may have a different appearance
After replacing your pads and wear sensors,
the dash warning will still be illuminated. However, you do not need
to go to your BMW dealer to have the warning message reset. To reset
the brake warning, turn the ignition key to the run position, but do not
start the car. After about one minute, the brake pad warning will
reset.
To order, click here:
and then locate your vehicle
along the left side of the on-line store page. Or, feel free to call us at
(800)222-8893 for help selecting the proper parts.
|
|
Brake pad wear sensor |
F-$26
R-$26 |
64-116-34031
64-116-34032 |
|
Problems shifting your BMW X3 6-Speed?
Many models of BMWs with
5-speed or 6-speed manual transmissions have a Clutch Delay Valve (CDV)
installed by the factory. This valve is the culprit behind the jerky
shifting that makes your BMW hard to drive, even if you have been driving a
standard transmission all your life. When replaced with the Zeckhausen
Racing modified CDV, your clutch is suddenly transformed into the smooth, easy
to modulate clutch that should have been delivered from the factory as standard.
Extend the life of your clutch and increase the enjoyment of your BMW driving
experience today!
For
full details of this modification, including history, theory of operation,
installation instructions, and a free CDV exchange service by mail,
click here.
|
|
 |
Modified CDV for the BMW
X3 6-Speed |
$35 |
CDV-004 |
|
Performance, All-Season, and Winter Tires |
|
Besides brakes, tires are the
most important component in determining stopping distance. It's literally
where the rubber meets the road. Selecting the right tire for your driving
conditions can make a tremendous difference. For example, if you live in
Florida or southern California and are driving on all-season tires, you are
leaving huge performance gains on the table! A good set of summer-only
performance tires can literally transform the handling and braking capabilities
of your car. In fact, if your goal is to minimize stopping distance,
you're better off going to Tire Rack's web site and buying tires first, before
spending any money here on better brakes!
For the best selection and
prices, use the Tire Decision Guide
by Tire Rack. Select the appropriate model year, then click the Go
button. You'll be asked a couple of questions which will help narrow down
your tire choices to the select few which most closely match your driving needs.
From Maximum Performance tires to All Season tires to Snow Tires, Tire Rack has
it all. The Tire Decision Guide takes the guesswork out of buying tires
for your car.
The Tire Decision Guide
|
|
