|
Street Pads
To order on-line, click here:
 Or call (800)222-8893
for help selecting the proper parts. |
|
 |
Centric Posi Quiet Semi-Metallic pads
offer a high friction level across a wide temperature range. Very low dust, low noise
w/OE designed composite shims to reduce pad vibration and squeal. Easy on rotors.
Better performance than typical low-dust pads. Give up the dust
without giving up the performance.
|
$78 |
63-104-0592 |
|
|
Centric Posi Quiet
Extended Wear pads
offer a stable friction level across a wide temperature range. Low dust, long
pad & rotor life, low noise,
w/OE designed shims to reduce pad vibration and squeal. Not a track pad.
|
$82
|
63-106-0592
|
|
 |
Hawk HPS high performance street pads have
low dust, low noise, and low rotor wear. Slightly higher in friction
level than Hawk Ceramic pads with a similar MOT of
around 750°F. Not recommended for track use, as their
friction level falls off rapidly when the MOT is exceeded.
|
$118 |
63-410-0592 |
|
 |
Hawk Performance Ceramic street pads
have extremely low dust, low noise, and low rotor wear. These represent the latest technology in street friction. Not
for track use.
|
$124
|
63-443-0592
|
|
 |
Hawk HP PLUS high performance street pads have
moderate dust, moderate rotor wear, very high initial bite and similar MOT
to Hawk HPS of
around 750°F. They tend to be noisy, sometimes squealing under light
braking, although
proper bedding can help. Ideal for autocross.
Not recommended for track use, as their
friction level falls off rapidly when MOT is exceeded, just like the
Hawk HPS.
|
$137
|
63-420-0592
|
|
 |
Porterfield
R4-S High Performance Street
and Autocross pads are designed for heavy-duty street driving, with better
fade resistance and lower dust than stock pads. Rotor friendly, low noise,
good for autocross and rally. Not for track use
except for novice drivers in small, low-horsepower cars.
|
$170 |
AP592.15-R4S |
|
Racing Pads
To order on-line, click here:
Or call (800)222-8893
for help selecting the proper parts. |
|
 |
Hawk Blue 9012 Race pads have a stable
torque curve, good bite, and a MOT of 1,050°F. Low to moderate rotor
wear when warm, but extremely high rotor wear when cold. Works well
for track use in the front of lower horsepower, front-engine cars with less
experienced drivers. Advanced drivers can overheat this pad on medium
to heavy cars. We primarily use this pad as a "tool" to remove
pad deposits from rotors.
|
$202
|
63-450-0592
|
|
|
Hawk HT-10 Race pads have good
modulation and release characteristics, making them ideal for the
"weekend warrior." Moderate rotor wear, moderate dust, a stable torque
curve, above average bite, and a MOT of 1,400°F. Recommended for the
front of front-engine cars for casual track use, as well as for the rear of club
race and professional race cars.
|
$189
|
63-490-0592
|
|
|
Hawk HT-14 Race pads are more
aggressive than HT-10. Very high average torque output, slightly
rising over its temperature range and a MOT of 1600°F. Even with its
high torque output, it retains good modulation and release characteristics
and moderate rotor wear. Recommended for the front of front engine
race cars in conjunction with HT-10 in the rear.
|
$229
|
63-400-0592
|
|
 |
PFC
97 Race pads have medium to high
average torque output, a very flat torque output over its operating
temperature range and a MOT of 2000°F. Exceptionally low
pad and rotor wear and excellent modulation and release characteristics.
Popular for the front of front engine cars driven at
lapping and open track days. Often used on the rear of club and pro-level race cars
with PFC 01 in front.
|
$254
|
63-650-0592
|
|
|
PFC
01 Race pads have very high
average torque output, rising over its operating
temperature range, and a MOT of 2000°F. Excellent bite, low
rotor wear, and average pad wear. Novice drivers may find this pad
challenging to modulate. Pad of choice for top race teams and our
favorite due to overwhelming positive feedback and few complaints of judder. Frequently used in the front of front engine
cars with PFC 97 in the rear.
|
$254
|
63-660-0592
|
|
 |
Ferodo DS2500 Club Race pads can be
used on the street and for light to medium track duty. Good cold bite,
but can be noisy.
Proper bedding can help reduce this noise. Less compressible than
other pads, giving it excellent pedal feel and good modulation. The
average friction level of about 0.50 remains constant at any speed and at
temperatures up to 1,000 °F, after which it falls off slowly.
Frequently used in the rear in conjunction with Ferodo DS3000 in front.
|
$136
|
63-360-0592
|
|
 |
Ferodo DS3000 Race pads have very high
coefficient of friction of about 0.62, a flat torque output over its operating
temperature range and very good modulation characteristics. Frequently used in the front of front engine
cars in conjunction with Ferodo DS2500 in the rear. Not recommended
for street use.
|
$254
|
63-350-0592
|
|
Brembo is a registered
trademark of Brembo SpA. Zeckhausen Racing is not affiliated in any
way with Brembo SpA or Brembo North America.
|
