(1993 - 1995)
1993 RX-7 R1, owned by David Zeckhausen, Maplewood, NJ
C-Tek Standard rear rotor 294x20mm (2 required)
C-Tek Standard rear 294x20mm 1-piece vented rotor…
- Manufacturer
- Centric
- Model
- 121.45052
Caliper rebuild kit - front (36mm pistons) to rebuild one 4-piston caliper
Caliper rebuild kit - front (36mm pistons) consisting of four dust boots, boot springs, and pressure seals and two internal…
- Manufacturer
- Centric
- Model
- 143.45011
Caliper rebuild kit - rear (35mm piston) to rebuild one caliper
Caliper rebuild kit - rear (35mm piston) consisting of one dust boot, boot spring, and pressure seal to rebuild one…
- Manufacturer
- Centric
- Model
- 143.91003
Centric Premium front rotor 294x22mm (2 required)
Centric Premium front 294x22mm 1-piece vented rotor…
- Manufacturer
- Centric
- Model
- 120.45051
Disc brake hardware kit - Front (1 set required)
Hardware kit consisting of parts for two brake calipers…
- Manufacturer
- Centric
- Model
- 117.44048
Disc brake hardware kit - Rear (1 set required) BACKORDERED
Hardware kit consisting of parts for two brake calipers…
- Manufacturer
- Centric
- Model
- 117.45018
![Hawk Blue 9012 race pads - front (D331/D463/D585) [1 box required]](images/Hawk_Race.jpg "Hawk Blue 9012 race pads - front (D331/D463/D585) [1 box required]")
Hawk Blue 9012 race pads - front (D331/D463/D585) [1 box required]
Hawk Blue 9012 Race pads have a stable torque curve, good bite, and a MOT of 1,050 degrees F. Low…
- Manufacturer
- Hawk
- Model
- 63-450-0331
Hawk Blue 9012 race pads - rear (D283/D332/D482) [1 box required]
Hawk Blue 9012 Race pads have a stable torque curve, good bite, and a MOT of 1,050 degrees F. Low…
- Manufacturer
- Hawk
- Model
- 63-450-0283
![Hawk DTC-30 race pads - rear (D283/D332/D482) [1 box required]](images/DTC.jpg "Hawk DTC-30 race pads - rear (D283/D332/D482) [1 box required]")
Hawk DTC-30 race pads - rear (D283/D332/D482) [1 box required]
Hawk DTC-30 is a member of the Dynamic Torque Control (DTC) race pad family and is suggested for light to…
- Manufacturer
- Hawk
- Model
- 63-430-0283
Hawk DTC-60 race pads - front (D331/D463/D585) [1 box required]
Hawk DTC-60 is a member of the Dynamic Torque Control race pad family, similar to DTC-70, but less initial bite,…
- Manufacturer
- Hawk
- Model
- 63-470-0331
Hawk DTC-60 race pads - rear (D283/D332/D482) [1 box required]
Hawk DTC-60 is a member of the Dynamic Torque Control race pad family, similar to DTC-70, but less initial bite,…
- Manufacturer
- Hawk
- Model
- 63-470-0283
Hawk HP Plus brake pads - front (D331/D463/D585) [1 box required]
Hawk HP PLUS high performance street pads have moderate dust, moderate rotor wear, high initial bite and a Maximum Operating…
- Manufacturer
- Hawk
- Model
- 63-420-0331
Hawk HP Plus brake pads - rear (D283/D332/D482) [1 box required]
Hawk HP PLUS high performance street pads have moderate dust, moderate rotor wear, high initial bite and a Maximum Operating…
- Manufacturer
- Hawk
- Model
- 63-420-0283
![Hawk HPS 5.0 brake pads - front (D331/D463/D585) [1 box required]](images/HPS_50.jpg "Hawk HPS 5.0 brake pads - front (D331/D463/D585) [1 box required]")
Hawk HPS 5.0 brake pads - front (D331/D463/D585) [1 box required]
Hawk HPS 5.0 high performance street pads produce higher bite and better pedal feel than Hawk HPS, with even lower…
- Manufacturer
- Hawk
- Model
- 63-411-0331
Hawk HPS 5.0 brake pads - rear (D283/D332/D482) [1 box required]
Hawk HPS 5.0 high performance street pads produce higher bite and better pedal feel than Hawk HPS, with even lower…
- Manufacturer
- Hawk
- Model
- 63-411-0283
![Hawk HPS brake pads - front (D331/D463/D585) [1 box required]](images/HPS.jpg "Hawk HPS brake pads - front (D331/D463/D585) [1 box required]")
Hawk HPS brake pads - front (D331/D463/D585) [1 box required]
Hawk HPS high performance street pads have low dust, low noise, and low rotor wear. Slightly higher in friction level…
- Manufacturer
- Hawk
- Model
- 63-410-0331
Hawk HPS brake pads - rear (D283/D332/D482) [1 box required]
Hawk HPS high performance street pads have low dust, low noise, and low rotor wear. Slightly higher in friction level…
- Manufacturer
- Hawk
- Model
- 63-410-0283
Hawk HT-10 race pads - front (D331/D463/D585) [1 box required]
Hawk HT-10 Race pads have intermediate to high torque, with smooth initial bite, making them ideal for the weekend warrior.…
- Manufacturer
- Hawk
- Model
- 63-490-0331
Hawk HT-10 race pads - rear (D283/D332/D482) [1 box required]
Hawk HT-10 Race pads have intermediate to high torque, with smooth initial bite, making them ideal for the weekend warrior.…
- Manufacturer
- Hawk
- Model
- 63-490-0283
![Porterfield R4 race pads - front (D331) (Special order) [1 box required]](images/Porterfield.jpg "Porterfield R4 race pads - front (D331) (Special order) [1 box required]")
Porterfield R4 race pads - front (D331) (Special order) [1 box required]
Porterfield R4 Full Race pads are extremely rotor friendly, with consistent modulation throughout their temperature range. The Carbon Kevlar material…
- Manufacturer
- Porterfield
- Model
- AP331-R4
Porterfield R4 race pads - rear (D332) (Special order) [1 box required]
Porterfield R4 Full Race pads are extremely rotor friendly, with consistent modulation throughout their temperature range. The Carbon Kevlar material…
- Manufacturer
- Porterfield
- Model
- AP332-R4
Porterfield R4-S high performance street pads - front (D331) (Special order) [1 box required]
Porterfield R4-S High Performance Street and Autocross pads are designed for heavy-duty street driving, with better fade resistance and lower…
- Manufacturer
- Porterfield
- Model
- AP331-R4S
Porterfield R4-S high performance street pads - rear (D332) (Special order) [1 box required]
Porterfield R4-S High Performance Street and Autocross pads are designed for heavy-duty street driving, with better fade resistance and lower…
- Manufacturer
- Porterfield
- Model
- AP332-R4S
Stainless lines - Front
StopTech stainless steel braided brake linesImprove pedal feel by replacing stock rubber lines with stainless…
- Manufacturer
- StopTech
- Model
- 950.45001
Stainless lines - Rear
StopTech stainless steel braided brake linesImprove pedal feel by replacing stock rubber lines with stainless…
- Manufacturer
- StopTech
- Model
- 950.45500
![StopTech Sport 309-Series brake pads - front (D331) [1 box required]](images/ST_Sport.jpg "StopTech Sport 309-Series brake pads - front (D331) [1 box required]")
StopTech Sport 309-Series brake pads - front (D331) [1 box required]
StopTech Sport brake pads offer a combination of high bite, low noise, medium dust, and sufficient operating temperature range to…
- Manufacturer
- StopTech
- Model
- 63-309-0331
StopTech Sport 309-Series brake pads - rear (D332) [1 box required]
StopTech Sport brake pads offer a combination of high bite, low noise, medium dust, and sufficient operating temperature range to…
- Manufacturer
- StopTech
- Model
- 63-309-0332
StopTech Sport drilled front rotor 294x22mm, Left
StopTech Sport drilled left front 294x22mm 1-piece vented rotor…
- Manufacturer
- StopTech
- Model
- 128.45051L
StopTech Sport drilled front rotor 294x22mm, Right
StopTech Sport drilled right front 294x22mm 1-piece vented rotor…
- Manufacturer
- StopTech
- Model
- 128.45051R
StopTech Sport drilled rear rotor 294x20mm, Left
StopTech Sport drilled left rear 294x20mm 1-piece vented rotor…
- Manufacturer
- StopTech
- Model
- 128.45052L
StopTech Sport drilled rear rotor 294x20mm, Right
StopTech Sport drilled right rear 294x20mm 1-piece vented rotor…
- Manufacturer
- StopTech
- Model
- 128.45052R
StopTech Sport slotted front rotor 294x22mm, Left
StopTech Sport slotted left front 294x22mm 1-piece vented rotor…
- Manufacturer
- StopTech
- Model
- 126.45051SL
StopTech Sport slotted front rotor 294x22mm, Right
StopTech Sport slotted right front 294x22mm 1-piece vented rotor…
- Manufacturer
- StopTech
- Model
- 126.45051SR
StopTech Sport slotted rear rotor 294x20mm, Left
StopTech Sport slotted left rear 294x20mm 1-piece vented rotor…
- Manufacturer
- StopTech
- Model
- 126.45052SL
StopTech Sport slotted rear rotor 294x20mm, Right
StopTech Sport slotted right rear 294x20mm 1-piece vented rotor…
- Manufacturer
- StopTech
- Model
- 126.45052SR