|
Back to Pontiac Products
Vibe (2003-2006) |
|
|
|
|
 |
Premium Rotors
|
 |
SportStop Rotors
|
Better than stock rotors! Centric Premium rotors are identical in
dimensions and internal vane design to the factory originals. During assembly,
rotors are straddle cut for the most accurate machining, then double disc ground
for optimum parallelism, minimal runout, and near zero thickness variation.
A non-directional finish is applied for better initial pad bedding. All
surfaces, including the hat, are machined and non-swept surfaces are electrostatically coated with a durable, black finish
(unless noted otherwise below) for corrosion protection
and good looks. Finally, all rotors are computer mill balanced to
incredibly tight tolerances. You won't find a better replacement rotor
anywhere. Click here for more details.
(Note: Centric is the parent
company of StopTech and PowerSlot. All StopTech SportStop and Power Slot
rotors start as Centric Premium blanks and are machined in-house on computer
controlled milling machines.)
StopTech SportStop rotors are available for
many applications, offering all the advantages of Centric Premium rotors, with
the addition of slotting and/or drilling. Slotted rotors provide additional bite and maintain
consistent friction level over the life of your pads. These are ideal
for aggressive street and even road racing applications. Slotted and drilled
rotors offer even more bite and stunning looks, but should be used on the street and not for racing. If you prefer slotted
or slotted and drilled rotors and there is no pricing listed below, send an inquiry to
orders@zeckhausen.com and we can let you know if they are available.
Make sure you install them properly. See:
How to Properly Install Plain,
Slotted or Drilled Rotors
To obtain more information about any rotor, you
may click on the part number (if a link is present) to see more details,
including rotor drawings, recommended replacement thickness, critical
dimensions, and weight. Note: The term "floating" in the rotor
description does not mean two-piece, floating rotor. It is Centric's terminology for a
rotor that can be removed without also removing the car's wheel bearings or hubs.
To order, click here:
 and then locate your vehicle
along the left side of the on-line store page. Or, feel free to call us at
(800)222-8893 for help selecting the proper parts.
|
 |
Plain Rotors |
|
Front 275mm x
25mm
1-piece vented rotors
Rear
269mm x 9mm
1-piece solid rotors
|
$52 Each
$28 Each |
120.44114
120.44115 |
|
 |
Slotted Rotors |
|
Front 275mm x
25mm
1-piece vented rotors
Rear
269mm x 9mm
1-piece solid rotors
|
$80 Each
$63 Each |
126.44114SL
126.44114SR
126.44115SL
126.44115SR |
|
 |
Slotted and Drilled Rotors |
|
Front 275mm x
25mm
1-piece vented rotors
Rear
269mm x 9mm
1-piece solid rotors
|
$90 Each
$69 Each |
127.44114L
127.44114R
127.44115L
127.44115R |
|
|
|
|
Stainless Steel Braided Brake Lines |
Improve pedal feel
by replacing stock rubber lines with stainless steel-braided
Teflon® lines.
Stock lines expand under pressure, contributing to spongy pedal feel.
StopTech lines reduce pedal travel and firm up pedal feel, allowing precise brake
modulation. Useful for drivers who "heel-toe" downshift,
providing a more stable platform from which to manipulate the throttle to
match engine revs to transmission speed.
StopTech's lines are covered with stainless steel
weave to
provide support and protect from abrasion and impact. The stainless
braid is molded inside a layer of clear plastic to
protect the lines from the environment and to protect your car's
suspension and delicate sensor wires from the "hacksaw effect" possible with other steel-braided brake lines.
These lines are DOT compliant and may be legally used on the highway,
unlike lines sold for "off-road use only."
StopTech lines have been tested and approved by the TÜV for sale in
Germany.
100 percent tested!
Every StopTech line is tested at 4,500 psi before it is
packed and shipped. Most manufacturers perform no pressure testing.
Some test random samples from their
assembly line or test to lower pressures.
When installing a front big brake kit,
Zeckhausen Racing strongly recommends upgrading your rear brake lines. 4-wheel
big brake kits come with
front and rear steel braided lines, so no additional purchase is necessary.
Each brake line kit includes enough lines for
both sides of your vehicle. To order, click here:
and then locate your vehicle
along the left side of the on-line store page. Or, feel free to call us at
(800)222-8893 for help selecting the proper parts.
(Teflon® is a registered trademark of DuPont) |
|
 |
Stainless steel braided brake lines |
F-$81
R-$67 |
950.44005
950.44505 |
|
High-Performance Brake Pads |
|
If you want better brake pads
for the street, consider Axxis. Axxis pads are
manufactured by
Bendix Mintex (FMP Group Pty. Ltd.) in Australia. Formerly marketed under the
brand names PBR and Repco, they are now sold in the United States under the
Axxis name.
Axxis Brake pad performance
comparison charts
Instructions
for bedding in new brake pads
To order, click here:
and then locate your vehicle
along the left side of the on-line store page. Or, feel free to call us at
(800)222-8893 for help selecting the proper parts.
|
|
 |
Axxis Deluxe Advanced street
pads (formerly called Deluxe Plus) are ideal if you are looking for a low dust pad that is quiet and rotor friendly, yet has
enough fade resistance for
performance cars. These ceramic-enhanced organic pads work well up to 716
°F, similar to OEM pads.
Stop washing brake dust off your wheels every few days! These are by far our most
popular street pads.
|
F-$63
R-$51 |
63-213-0923
63-213-0823 |
|
 |
Centric Posi Quiet Semi-Metallic pads
offer a high friction level across a wide temperature range. Very low dust, low noise
w/OE designed composite shims to reduce pad vibration and squeal. Easy on rotors.
Better performance than typical low-dust pads. Give up the dust
without giving up the performance.
|
F-$46
R-$35
|
63-105-0923
63-105-0823
|
|
 |
Hawk HPS high performance street pads have
low dust, low noise, and low rotor wear. Slightly higher in friction
level than Hawk Ceramic pads with a similar MOT of
around 750°F. Not recommended for track use, as their
friction level falls off rapidly when the MOT is exceeded.
|
F-$91
R-$85 |
63-410-0923
63-410-0823 |
|
 |
Hawk Performance Ceramic street pads
have extremely low dust, low noise, and low rotor wear. These represent the latest technology in street friction. Not
for track use.
|
F-$95
R-$90
|
63-443-0923
63-443-0823
|
|
Performance, All-Season, and Winter
Tires |
|
Besides brakes, tires are the
most important component in determining stopping distance. It's literally
where the rubber meets the road. Selecting the right tire for your driving
conditions can make a tremendous difference. For example, if you live in
Florida or southern California and are driving on all-season tires, you are
leaving huge performance gains on the table! A good set of summer-only
performance tires can literally transform the handling and braking capabilities
of your car. In fact, if your goal is to minimize stopping distance,
you're better off going to Tire Rack's web site and buying tires first, before
spending any money here on better brakes!
For the best selection and
prices, use the Tire Decision Guide
by Tire Rack. Select the appropriate model year, then click the Go
button. You'll be asked a couple of questions which will help narrow down
your tire choices to the select few which most closely match your driving needs.
From Maximum Performance tires to All Season tires to Snow Tires, Tire Rack has
it all. The Tire Decision Guide takes the guesswork out of buying tires
for your car.
The Tire Decision Guide
 |
