Track & R-Spec
w/Brembo Brakes
Caliper rebuild kit - front (42mm pistons) to rebuild one 4-piston caliper
Caliper rebuild kit - front (42mm pistons) consisting of 4 dust boots and pressure seals to rebuild one 4-piston caliper.…
- Manufacturer
- Centric
- Model
- 143.34032
Caliper rebuild kit - rear (28/32mm pistons) to rebuild one 4-piston caliper UNAVAILABLE
Caliper rebuild kit - rear (28/32mm pistons) consisting of two of each size dust boots and pressure seals to rebuild…
- Manufacturer
- Centric
- Model
- 143.63034
Centric Premium High Carbon front rotor 340x28mm (2 required)
Centric Premium High Carbon front 340x28mm 1-piece vented rotor…
- Manufacturer
- Centric
- Model
- 125.51036
Centric Premium High Carbon rear rotor 330x20mm (2 required)
Centric Premium High Carbon rear 330x20mm 1-piece vented rotor…
- Manufacturer
- Centric
- Model
- 125.51035
Disc brake hardware kit - Front (1 set required) BACKORDERED
Hardware kit consisting of parts for two brake calipers…
- Manufacturer
- Centric
- Model
- 117.51019
Disc brake hardware kit - Rear (1 set required) BACKORDERED
Hardware kit consisting of parts for two brake calipers…
- Manufacturer
- Centric
- Model
- 117.51020
![Ferodo DS1.11 Endurance race pads - front (D1001) [1 box required] 14.7mm thick, no sensor or damping weights](images/pad_DS3000.jpg "Ferodo DS1.11 Endurance race pads - front (D1001) [1 box required] 14.7mm thick, no sensor or damping weights")
Ferodo DS1.11 Endurance race pads - front (D1001) [1 box required] 14.7mm thick, no sensor or damping weights
Ferodo DS1.11 Race pads have a very high coefficient of friction only slightly lower than DS3000, but with drastically longer…
- Manufacturer
- Ferodo
- Model
- 63-390-1001
Ferodo DS1.11 Endurance race pads - rear (D592/D1053) [1 box required] 15mm thick
Ferodo DS1.11 Race pads have a very high coefficient of friction only slightly lower than DS3000, but with drastically longer…
- Manufacturer
- Ferodo
- Model
- 63-390-0592
![Ferodo DS2500 race pads - front (D1001) [1 box required] 14.7mm thick, no sensor or damping weights](images/pad_DS2500.jpg "Ferodo DS2500 race pads - front (D1001) [1 box required] 14.7mm thick, no sensor or damping weights")
Ferodo DS2500 race pads - front (D1001) [1 box required] 14.7mm thick, no sensor or damping weights
Ferodo DS2500 Club Race pads can be used on the street and for light to medium track duty. Good cold…
- Manufacturer
- Ferodo
- Model
- 63-360-1001
Ferodo DS2500 race pads - rear (D592/D1053) [1 box required] 15mm thick
Ferodo DS2500 Club Race pads can be used on the street and for light to medium track duty. Good…
- Manufacturer
- Ferodo
- Model
- 63-360-0592
![Hawk DTC-30 race pads - front (D1001/D1016/D1050) [1 box required] 14.9mm thick, no sensor or damping weights](images/DTC.jpg "Hawk DTC-30 race pads - front (D1001/D1016/D1050) [1 box required] 14.9mm thick, no sensor or damping weights")
Hawk DTC-30 race pads - front (D1001/D1016/D1050) [1 box required] 14.9mm thick, no sensor or damping weights
Hawk DTC-30 is a member of the Dynamic Torque Control (DTC) race pad family and is suggested for light to…
- Manufacturer
- Hawk
- Model
- 63-430-1001
Hawk DTC-30 race pads - rear (D592/D1053) [1 box required] 14.5mm thick
Hawk DTC-30 is a member of the Dynamic Torque Control (DTC) race pad family and is suggested for light to…
- Manufacturer
- Hawk
- Model
- 63-430-0592
Hawk DTC-50 race pads - front (D1001/D1016/D1050) [1 box required] 14.9mm thick, no sensor or damping weights
Hawk DTC-50 is a member of the Dynamic Torque Control race pad family with torque output significantly higher than DTC-60…
- Manufacturer
- Hawk
- Model
- 63-465-1001
Hawk DTC-50 race pads - OEM Brembo (D592/D1053) [1 box required] 14.5mm thick
Hawk DTC-50 is a member of the Dynamic Torque Control race pad family with torque output significantly higher than DTC-60…
- Manufacturer
- Hawk
- Model
- 63-465-0592
Hawk DTC-60 race pads - front (D1001/D1016/D1050) [1 box required] 14.9mm thick, no sensor or damping weights
Hawk DTC-60 is a member of the Dynamic Torque Control race pad family, similar to DTC-70, but less initial bite,…
- Manufacturer
- Hawk
- Model
- 63-470-1001
Hawk DTC-60 race pads - rear (D592/D1053) [1 box required] 14.5mm thick
Hawk DTC-60 is a member of their new Dynamic Torque Control race pad family with similar characteristics to DTC-70, but…
- Manufacturer
- Hawk
- Model
- 63-470-0592
Hawk DTC-70 race pads - front (D1001/D1016/D1050) [1 box required] 14.9mm thick, no sensor or damping weights
Hawk DTC-70 is a member of the Dynamic Torque Control race pad family, with an average level of friction among…
- Manufacturer
- Hawk
- Model
- 63-480-1001
Hawk DTC-70 race pads - rear (D592/D1053) [1 box required] 14.5mm thick
Hawk DTC-70 is the most serious member of their new "Dynamic Torque Control" race pad family, with an average level…
- Manufacturer
- Hawk
- Model
- 63-480-0592
Hawk DTC-80 race pads - front (D1001/D1016/D1050) [1 box required] 14.9mm thick, no sensor or damping weights
Hawk DTC-80 is the newest and most extreme member of the Dynamic Torque Control race pad family, with the highest…
- Manufacturer
- Hawk
- Model
- 63-485-1001
![Hawk HP Plus brake pads - front (D1001/D1016/D1050) [1 box required] 14.9mm thick, no sensor or damping weights](images/Hawk_Race.jpg "Hawk HP Plus brake pads - front (D1001/D1016/D1050) [1 box required] 14.9mm thick, no sensor or damping weights")
Hawk HP Plus brake pads - front (D1001/D1016/D1050) [1 box required] 14.9mm thick, no sensor or damping weights
Hawk HP PLUS high performance street pads have moderate dust, moderate rotor wear, high initial bite and a Maximum Operating…
- Manufacturer
- Hawk
- Model
- 63-420-1001
Hawk HP Plus brake pads - rear (D592/D1053) [1 box required] 14.5mm thick
Hawk HP PLUS high performance street pads have moderate dust, moderate rotor wear, very high initial bite and similar MOT…
- Manufacturer
- Hawk
- Model
- 63-420-0592
![Hawk HPS 5.0 brake pads - front (D1001/D1016/D1050) [1 box required] 14.9mm thick, no sensor or damping weights](images/HPS_50.jpg "Hawk HPS 5.0 brake pads - front (D1001/D1016/D1050) [1 box required] 14.9mm thick, no sensor or damping weights")
Hawk HPS 5.0 brake pads - front (D1001/D1016/D1050) [1 box required] 14.9mm thick, no sensor or damping weights
Hawk HPS 5.0 high performance street pads produce higher bite and better pedal feel than Hawk HPS, with even lower…
- Manufacturer
- Hawk
- Model
- 63-411-1001
Hawk HPS 5.0 brake pads - front (D592/D1053) [1 box required] 14.5mm thick
Hawk HPS 5.0 high performance street pads produce higher bite and better pedal feel than Hawk HPS, with even lower…
- Manufacturer
- Hawk
- Model
- 63-411-0592
![Hawk HPS brake pads - front (D1001/D1016/D1050) [1 box required] 14.9mm thick, no sensor or damping weights](images/HPS.jpg "Hawk HPS brake pads - front (D1001/D1016/D1050) [1 box required] 14.9mm thick, no sensor or damping weights")
Hawk HPS brake pads - front (D1001/D1016/D1050) [1 box required] 14.9mm thick, no sensor or damping weights
Hawk HPS high performance street pads have low dust, low noise, and low rotor wear. Slightly higher in friction level…
- Manufacturer
- Hawk
- Model
- 63-410-1001
Hawk HPS brake pads - rear (D592/D1053) [1 box required] 14.5mm thick
Hawk HPS high performance street pads have low dust, low noise, and low rotor wear. Slightly higher in friction…
- Manufacturer
- Hawk
- Model
- 63-410-0592
Hawk HT-10 race pads - front (D1001/D1016/D1050) [1 box required] 14.9mm thick, no sensor or damping weights
Hawk HT-10 Race pads have intermediate to high torque, with smooth initial bite, making them ideal for the weekend warrior.…
- Manufacturer
- Hawk
- Model
- 63-490-1001
Hawk HT-10 race pads - rear (D592/D1053) [1 box required] 14.5mm thick
Hawk HT-10 Race pads have good modulation and release characteristics, making them ideal for the "weekend warrior." Moderate rotor…
- Manufacturer
- Hawk
- Model
- 63-490-0592
![Hawk Performance Ceramic brake pads - front (D1001/D1016/D1050) [1 box required] 14.9mm thick, no sensor or damping weights](images/Ceramic.jpg "Hawk Performance Ceramic brake pads - front (D1001/D1016/D1050) [1 box required] 14.9mm thick, no sensor or damping weights")
Hawk Performance Ceramic brake pads - front (D1001/D1016/D1050) [1 box required] 14.9mm thick, no sensor or damping weights
Hawk Performance Ceramic street pads have extremely low dust, low noise, and low rotor wear. These represent the latest technology…
- Manufacturer
- Hawk
- Model
- 63-443-1001
Hawk Performance Ceramic brake pads - rear (D592/D1053) [1 box required] 14.5mm thick
Hawk Performance Ceramic street pads have extremely low dust, low noise, and low rotor wear. These represent the latest…
- Manufacturer
- Hawk
- Model
- 63-443-0592
![Pagid RSL29 Yellow Endurance Race Pads - front (D1001) [1 box required] 15.9mm thick, no sensor or damping weights](images/RS29.jpg "Pagid RSL29 Yellow Endurance Race Pads - front (D1001) [1 box required] 15.9mm thick, no sensor or damping weights")
Pagid RSL29 Yellow Endurance Race Pads - front (D1001) [1 box required] 15.9mm thick, no sensor or damping weights
Pagid RSL29 is an endurance race pad based on (and replacing) the popular RSL19, with similar friction levels, slightly higher…
- Manufacturer
- Pagid
- Model
- 63-910-1001
Pagid RSL29 Yellow Endurance Race Pads - rear (D592/D1053) [1 box required] 15mm thick
Pagid RS29 is an endurance race pad based on (and replacing) the popular RS19, with similar friction levels, slightly higher…
- Manufacturer
- Pagid
- Model
- 63-910-0592
![PFC01 race pads - front (D1001) [1 box required] 15mm thick, no sensor or damping weights](images/PF_Pads.jpg "PFC01 race pads - front (D1001) [1 box required] 15mm thick, no sensor or damping weights")
PFC01 race pads - front (D1001) [1 box required] 15mm thick, no sensor or damping weights
Performance Friction 01 Race pads have very high average torque output, rising over its operating temperature range, and a MOT…
- Manufacturer
- Performance Friction
- Model
- 63-660-1001
PFC11 race pads - rear (D592/D1053) [1 box required] 15mm thick
Performance Friction 11 Race pads were developed from the legendary PFC 01 compound, with improvements to bite, modulation, and release…
- Manufacturer
- Performance Friction
- Model
- 63-661-0592
![Porterfield R4 race pads - front (D1001) (Special order) [1 box required] no sensor or damping weights](images/Porterfield.jpg "Porterfield R4 race pads - front (D1001) (Special order) [1 box required] no sensor or damping weights")
Porterfield R4 race pads - front (D1001) (Special order) [1 box required] no sensor or damping weights
Porterfield R4 Full Race pads are extremely rotor friendly, with consistent modulation throughout their temperature range. The Carbon Kevlar material…
- Manufacturer
- Porterfield
- Model
- AP1001-R4
Porterfield R4 race pads - rear (D592/D1053) (Special order) [1 box required] 15mm thick
Porterfield R4 Full Race pads are extremely rotor friendly, with consistent modulation throughout their temperature range. The Carbon Kevlar material…
- Manufacturer
- Porterfield
- Model
- AP592.15-R4
Porterfield R4-S high performance street pads - front (D1001) (Special order) [1 box required] no sensor or damping weights
Porterfield R4-S High Performance Street and Autocross pads are designed for heavy-duty street driving, with better fade resistance and lower…
- Manufacturer
- Porterfield
- Model
- AP1001-R4S
![Posi Quiet Ceramic brake pads - front (D1743) [1 box required]](images/PosiQuiet_logoA.jpg "Posi Quiet Ceramic brake pads - front (D1743) [1 box required]")
Posi Quiet Ceramic brake pads - front (D1743) [1 box required]
Centric Posi Quiet Ceramic pads offer extremely long pad life and are Centric's lowest dust pads, keeping wheels cleaner longer.…
- Manufacturer
- Centric
- Model
- 63-105-1743
Posi Quiet Ceramic brake pads - rear (D1053-1) [1 box required]
Centric Posi Quiet Ceramic pads offer extremely long pad life and are Centric's lowest dust pads, keeping wheels cleaner longer.…
- Manufacturer
- Centric
- Model
- 63-105-1053-1
Posi Quiet semi-metallic brake pads - front (D1001) [1 box required] 14.9mm thick, no sensor or damping weights
Centric Posi Quiet Semi-Metallic pads offer high friction and initial bite across a wide temperature range. Low dust, low noise…
- Manufacturer
- Centric
- Model
- 63-104-1001
Stainless lines - Front (Also fits StopTech BBK 83-477-6700)
StopTech stainless steel braided brake linesImprove pedal feel by replacing stock rubber lines with stainless…
- Manufacturer
- StopTech
- Model
- 950.51001
Stainless lines - Rear (Also fits StopTech BBK 83-477-005G) UNAVAILABLE
StopTech stainless steel braided brake linesImprove pedal feel by replacing stock rubber lines with stainless…
- Manufacturer
- StopTech
- Model
- 950.51501
![StopTech Sport 309-Series brake pads - front (D1001) [1 box required] 14.9mm thick, no sensor or damping weights](images/ST_Sport.jpg "StopTech Sport 309-Series brake pads - front (D1001) [1 box required] 14.9mm thick, no sensor or damping weights")
StopTech Sport 309-Series brake pads - front (D1001) [1 box required] 14.9mm thick, no sensor or damping weights
StopTech Sport brake pads offer a combination of high bite, low noise, medium dust, and sufficient operating temperature range to…
- Manufacturer
- StopTech
- Model
- 63-309-1001
StopTech Sport 309-Series brake pads - rear (D1053) [1 box required] 14.6mm thick
StopTech Sport brake pads offer a combination of high bite, low noise, medium dust, and sufficient operating temperature range to…
- Manufacturer
- StopTech
- Model
- 63-309-1053
StopTech Sport slotted & drilled front rotor 340x28mm, Left
StopTech Sport slotted & drilled left front 340x28mm 1-piece vented rotor…
- Manufacturer
- StopTech
- Model
- 127.51036L
StopTech Sport slotted & drilled front rotor 340x28mm, Right
StopTech Sport slotted & drilled right front 340x28mm 1-piece vented rotor…
- Manufacturer
- StopTech
- Model
- 127.51036R
StopTech Sport slotted & drilled rear rotor 330x20mm, Left
StopTech Sport slotted & drilled left rear 330x20mm 1-piece vented rotor…
- Manufacturer
- StopTech
- Model
- 127.51035L
StopTech Sport slotted & drilled rear rotor 330x20mm, Right
StopTech Sport slotted & drilled right rear 330x20mm 1-piece vented rotor…
- Manufacturer
- StopTech
- Model
- 127.51035R
StopTech Sport slotted front rotor 340x28mm, Left
StopTech Sport slotted left front 340x28mm 1-piece vented rotor…
- Manufacturer
- StopTech
- Model
- 126.51036SL
StopTech Sport slotted front rotor 340x28mm, Right
StopTech Sport slotted right front 340x28mm 1-piece vented rotor…
- Manufacturer
- StopTech
- Model
- 126.51036SR
StopTech Sport slotted rear rotor 330x20mm, Left
StopTech Sport slotted left rear 330x20mm 1-piece vented rotor…
- Manufacturer
- StopTech
- Model
- 126.51035SL
StopTech Sport slotted rear rotor 330x20mm, Right
StopTech Sport slotted right rear 330x20mm 1-piece vented rotor…
- Manufacturer
- StopTech
- Model
- 126.51035SR
- 1 x StopTech Racing STR660 brake fluid - 622 F dry, 404 F wet boiling point (1/2 liter)
- 1 x Castrol React SRF brake fluid - 590 F dry, 518 F wet boiling (1 Liter)
- 1 x Ferodo DSUNO race pads - race caliper (CP3215-D42) [1 box required] 16.7mm thick
- 1 x Ferodo DS2500 race pads - front (D1382) [1 box required] 19mm thick
- 1 x Ferodo DS2500 race pads - front (D345/D608) [1 box required]
- 1 x Hawk HPS brake pads - rear (D345/D446/D608) [1 box required]
- 1 x Hawk DTC-70 race pads - front (D345/D446/D608) [1 box required]
- 1 x Porterfield R4 race pads - rear (D345/D608) (Special order) [1 box required]
- 1 x Porterfield R4-S high performance street pads - rear (D345/D608) (Special order) [1 box required]
- 1 x Hawk DTC-80 race pads - OEM Brembo (D810/D968/D1383) [1 box required] 17mm thick
- 1 x 46mm Caliper Rebuild Kit - 2 Dust Boots & Pressure Seals for 46mm pistons
- 1 x Bleed screw for StopTech calipers - M10x1.0mm (27 in stock)
- 1 x Ferodo DS1.11 Endurance race pads - OEM Brembo (D592/D1053) [1 box required] 15mm thick
- 1 x Hawk DTC-70 race pads - rear (D1368) [1 box required]
- 1 x Hawk DTC-70 race pads - race caliper (CP3215D-50) [1 box required] 16.6mm thick
- 1 x Ferodo DSUNO race pads - race caliper (FRP3144) [1 box required] 54mm radial depth, 18mm thick, no center eyelet
- 1 x Ferodo DS2500 race pads - front (D592/D1053) [1 box required] 15mm thick
- 1 x Posi Quiet Ceramic brake pads - rear (D961) [1 box required]
- 1 x Porterfield R4-S high performance street pads - rear (D961) (Special order) [1 box required]
- 1 x Hawk DTC-30 race pads - Brembo 6-piston monobloc caliper (wide annulus - 57mm)
- 1 x Ferodo DS3000 race pads - rear (D810/D968) [1 box required]
- 1 x Hawk DTC-60 race pads - rear (D810/D968/D1383) [1 box required] 17mm thick
- 1 x StopTech Sport 309-Series brake pads - front (D810/D968) [1 box required]
- 1 x C-Tek Standard front rotor 231x17mm (2 required)
- 1 x Hawk DTC-70 race pads - front (D1382) [1 box required] 19mm thick
- 1 x PFC13 race pads - front (DR63) 16mm thick
- 1 x Hawk DTC-60 race pads - front (D810/D968/D1383) [1 box required] 17mm thick
- 1 x Hawk HP Plus brake pads - rear (D810/D968/D1383) [1 box required] 17mm thick
- 1 x Hawk DTC-30 race pads - rear (D810/D968/D1383) [1 box required] 17mm thick
- 1 x Hawk HPS 5.0 brake pads - front (D810/D968/D1383) [1 box required] 17mm thick
- 1 x Hawk Blue 9012 race pads - rear (D810/D968/D1383) [1 box required] 17mm thick
- 1 x Hawk HPS brake pads - rear (D810/D968/D1383) [1 box required] 17mm thick
$8,472.97