Gen1-Gen2 Calipers
Body-bolts visible from front
|
Item #
|
Description
|
Part #
(for 28mm width calipers) |
Part #
(for 32mm width calipers) |
Part #
(for 35mm width calipers) |
|
1
|
Bridge Bolt
|
40.6B0.6085
|
40.6B0.6090
|
40.600.6093
|
|
2
|
Bridge Bolt Washer
|
40.220.0002
|
40.220.0002
|
40.220.0002
|
|
3
|
Pad Spring Clip/Retainer
|
42.200.0001
|
42.200.0002
|
42.200.0003
|
|
4
|
ST-40 Bridge
|
32.429.NN05
|
32.439.NN05
|
32.449.NN05
|
|
5
|
TIME SERT M6x1.0
|
40.160.0001
|
40.160.0001
|
40.160.0001
|
|
6
|
Bleed Screw
|
41.000.0003
|
41.000.0003
|
41.000.0003
|
|
7
|
Bleed Screw Cap
|
780.09450
|
780.09450
|
780.09450
|
|
8
|
Crossover Tube
|
41.400.0304
|
41.400.0105
|
41.400.0106
|
|
9
|
Abutment Plates & Screw Kit
|
89.030.0002 | 89.030.0002 | 89.030.0002 |
|
10
|
Body Bolt, M12x1.75
|
40.6B1.2080
|
40.6B1.2080
|
40.601.2085
|
|
11
|
Body Bolt, M12x1.75
|
40.601.2085 |
40.601.2085
|
40.090.1012
|
|
12
|
Body Bolt Washer
|
40.220.0001
|
40.220.0001
|
40.220.0001
|
StopTech ST-40 calipers have application-specific piston sizing that can range from 26mm to 46mm diameter. Pressure Seals (#13), Pistons (#14), and Dust Boots (#15) may be ordered here: Rebuild Parts
Brake pads may be ordered here: ST-40 Pads
All other ST-40 hardware is listed below.
Abutment plate kit for C-42, ST-40, ST-41 calipers 3 in stock
StopTech abutment plate kit for C-42, ST-40 or ST-41 caliper. Contains four stainless steel abutment plates (two with pad tensioning…
- Manufacturer
- StopTech
- Model
- 89.030.0002
Banjo bolt - M10x1.0 threads, 20mm shank, 29.5mm overall length for StopTech calipers (1 in stock)
Banjo bolt - M10x1.0 threads, 20mm shank, 29.5mm overall length…
- Manufacturer
- StopTech
- Model
- 772.21707
Bleed screw cap for StopTech calipers (BACKORDERED)
Rubber bleed screw cap for StopTech brake calipers. Sold individually.…
- Manufacturer
- StopTech
- Model
- 780.09450
Bleed screw for StopTech calipers - M10x1.0mm (27 in stock)
Replacement bleed screw for StopTech brake calipers, including ST-60, ST-43, ST-42, ST-41, ST-40, ST-22. Overall length 29mm, base of hex…
- Manufacturer
- StopTech
- Model
- 41.000.0011
Brake pad wear sensor for StopTech big brake kit calipers
Adapt your vehicle's pad wear monitoring system to work with StopTech big brake kit calipers. Order the same quantity as…
- Manufacturer
- StopTech
- Model
- 68.000.0008
Bridge for ST-40 caliper, black (28mm wide rotors) UNAVAILABLE
Stiffening bridge for StopTech ST-40 caliper (Does not include brake pad spring clip)…
- Manufacturer
- StopTech
- Model
- 32.429.NN05
Bridge for ST-40 caliper, black (32mm wide rotors) UNAVAILABLE
Stiffening bridge for StopTech ST-40 caliper (Does not include brake pad spring clip)…
- Manufacturer
- StopTech
- Model
- 32.439.NN05
Bridge for ST-40 caliper, black (35mm wide rotors) UNAVAILABLE
Stiffening bridge for StopTech ST-40 caliper (Does not include brake pad spring clip)…
- Manufacturer
- StopTech
- Model
- 32.449.NN05
Crossover tube for ST-40, ST-45, ST-60, ST-65 (32mm thick rotors) Supersedes 41.400.0005 (UNAVAILABLE)
StopTech crossover tube for Gen2 through Gen4 ST-40, ST-45, and ST-60 calipers - 32mm thick rotors. 131.5mm between hole centers.…
- Manufacturer
- StopTech
- Model
- 41.400.0105
Crossover tube for ST-40, ST-45, ST-60, ST-65 (35mm thick rotors) Supersedes 41.400.0006 (4 in stock)
StopTech crossover tube for ST-40, ST-45, and ST-60 calipers - 35mm thick rotors. 134.5mm between hole centers. These will not…
- Manufacturer
- StopTech
- Model
- 41.400.0106
Crush Washers (QTY 4) for StopTech calipers - Copper, 10mm ID, 15mm OD, 1.25mm Thick UNAVAILABLE
10mm copper crush washers for StopTech calipers. 10mm ID, 15mm OD, 1.25mm Thickness. Quantity 4…
- Manufacturer
- StopTech
- Model
- 41.604.4516K
Jet Nut Washers M12, 18mm OD, 12mm ID (Qty 2)
Washers (QTY 2) for StopTech Jet nuts. Also used with StopTech ST-22 and ST-45 caliper mounting bolts and caliper body…
- Manufacturer
- StopTech
- Model
- 40.220.0001K
Jet Nuts 7/16x20 for mounting StopTech calipers (Qty 2) UNAVAILABLE
Jet Nut, 7/16x20 Self Locking, Gold Cad plated. Used to attach StopTech caliper to mounting bracket (Pair)…
- Manufacturer
- StopTech
- Model
- 40.440.0001K
Pad Retaining Clip (for 32mm wide ST-40 caliper or 28mm wide ST-41 caliper) Clip length = 81mm (14 in stock)
Pad retaining clip for ST-40 calipers designed for 32mm thick rotors and for ST-41 calipers designed for 28mm thick rotors.…
- Manufacturer
- StopTech
- Model
- 42.200.0002
Pad Retaining Clip (for 35mm wide ST-40 caliper or 32mm wide ST-41 caliper) Clip length = 84mm (6 in stock)
Pad retaining clip for ST-40 calipers designed for 35mm thick rotors or ST-41 calipers designed for 32mm thick rotors. This…
- Manufacturer
- StopTech
- Model
- 42.200.0003
Socket Cap Screw M12x1.75, 90mm length 2 in stock
M12x1.75x90mm caliper body through-bolt for StopTech, Dacromet coated, sold indivdually.…
- Manufacturer
- StopTech
- Model
- 40.090.1012