Item #
|
Description
|
Part # (for 32mm width calipers)
|
Part # (for 35mm width calipers)
|
|
|
40.6B0.6095
|
40.6B0.6097
|
|
|
40.220.0002
|
40.220.0002
|
3 |
|
32.639.N105 |
32.649.N105 |
4 |
TIME-SERT M6x1.0 |
40.160.0001
|
40.160.0001
|
|
|
41.000.0011
|
41.000.0011
|
|
|
780.09450
|
780.09450
|
|
|
41.400.0105
|
41.400.0106
|
|
Abutment Block Kit
|
89.030.0005 |
89.030.0005 |
9
|
Body Bolt, M10x90
|
40.601.0090
|
40.601.0090
|
10
|
Body Bolt, M10x80
|
40.6B1.0080
|
40.6B1.0080
|
11
|
Body Bolt, M10x70
|
40.6B1.0070
|
40.6B1.0070
|
12
|
Body Bolt Washer, M10
|
40.220.0003
|
40.220.0003
|
StopTech ST-60 Gen1-3 calipers use application-specific piston sizing, with pistons ranging in diameter from 26mm to 46mm. These are typically staggered, with larger trailing pistons used. Thus, pistons are NOT all the same size. ST-60 Gen1-3 calipers use "short" pistons, 29.5mm in length. Pressure Seals (#13), Pistons (#14), and Dust Boots (#15) may be ordered here: Rebuild Parts
Brake pads may be ordered here: ST-60 Pads
All other ST-60 hardware is listed below.
Displaying 1 to 13 (of 13 products)
StopTech abutment plate kit. Contains four abutment blocks, four stainless steel abutment plates (two with pad tensioning kinks), eight M5…
- Manufacturer
- StopTech
- Model
- 89.030.0005
Banjo bolt - M10x1.0 threads, 20mm shank, 29.5mm overall length…
- Manufacturer
- StopTech
- Model
- 772.21707
Rubber bleed screw cap for StopTech brake calipers. Sold individually.…
- Manufacturer
- StopTech
- Model
- 780.09450
Replacement bleed screw for StopTech brake calipers, including ST-60, ST-43, ST-42, ST-41, ST-40, ST-22. Overall length 29mm, base of hex…
- Manufacturer
- StopTech
- Model
- 41.000.0011
Adapt your vehicle's pad wear monitoring system to work with StopTech big brake kit calipers. Order the same quantity as…
- Manufacturer
- StopTech
- Model
- 68.000.0008
Caliper stiffening bridge for StopTech ST-60 caliper…
- Manufacturer
- StopTech
- Model
- 32.639.N105
Caliper stiffening bridge for StopTech ST-60 caliper…
- Manufacturer
- StopTech
- Model
- 32.649.N105
StopTech crossover tube for Gen2 through Gen4 ST-40, ST-45, and ST-60 calipers - 32mm thick rotors. 131.5mm between hole centers.…
- Manufacturer
- StopTech
- Model
- 41.400.0105
StopTech crossover tube for ST-40, ST-45, and ST-60 calipers - 35mm thick rotors. 134.5mm between hole centers. These will not…
- Manufacturer
- StopTech
- Model
- 41.400.0106
10mm copper crush washers for StopTech calipers. 10mm ID, 15mm OD, 1.25mm Thickness. Quantity 4…
- Manufacturer
- StopTech
- Model
- 41.604.4516K
Washers (QTY 2) for StopTech Jet nuts. Also used with StopTech ST-22 and ST-45 caliper mounting bolts and caliper body…
- Manufacturer
- StopTech
- Model
- 40.220.0001K
Jet Nut, 7/16x20 Self Locking, Gold Cad plated. Used to attach StopTech caliper to mounting bracket (Pair)…
- Manufacturer
- StopTech
- Model
- 40.440.0001K
Pad retaining spring for StopTech ST-60/STR-60 caliper bridge - 2 springs required per bridge…
- Manufacturer
- StopTech
- Model
- 42.100.0080K
Displaying 1 to 13 (of 13 products)