Item #
|
Description
|
Part #
(for 32mm width calipers) |
Part #
(for 35mm width calipers) |
1
|
Bridge Bolt
|
40.6B0.6095
|
40.6B0.6097
|
2
|
Bridge Bolt Washer
|
40.220.0002
|
40.220.0002
|
3
|
ST-60 Bridge (Red)
|
32.639.N107 | 32.649.N107 |
ST-60 Bridge (Black)
|
32.639.N105 | 32.649.N105 | |
ST-60 Bridge(Silver)
|
32.639.N106 | 32.649.N106 | |
|
ST-60 Bridge (Blue)
|
32.639.N102 | 32.649.N102 |
ST-60 Bridge (Yellow)
|
32.639.N108 | 32.649.N108 | |
4
|
TIME-SERT M6x1.0
|
40.160.0001
|
40.160.0001
|
5
|
Bleed Screw
|
41.000.0011
|
41.000.0011
|
6
|
Bleed Screw Cap
|
780.09450
|
780.09450
|
7
|
Crossover Tube
|
41.400.0105
|
41.400.0106
|
8
|
Abutment Plate Kit
|
89.030.0012 |
89.030.0012 |
9
|
Body Bolt, M10x80
|
40.6B1.0080
|
40.6B1.0080
|
10
|
Body Bolt, M10x75
|
40.6B1.0075
|
40.6B1.0075
|
11
|
Body Bolt, M10x70
|
40.6B1.0070
|
40.6B1.0070
|
12
|
Body Bolt Washer, M10
|
40.220.0003
|
40.220.0003
|
StopTech ST-60 Gen4 calipers use application-specific piston sizing, with pistons ranging in diameter from 26mm to 46mm. These are typically staggered, with larger trailing pistons used. Thus, pistons are NOT all the same size. ST-60 Gen4 calipers use "tall" pistons, 32mm in length. Pressure Seals (#13), Pistons (#14), and Dust Boots (#15) may be ordered here: Rebuild Parts
Brake pads may be ordered here: ST-60 Pads
All other ST-60 Gen4 hardware is listed below.