Gen4 Calipers
w/o Abutment Blocks
|
Item #
|
Description
|
Part #
(for 32mm width calipers) |
Part #
(for 35mm width calipers) |
|
1
|
Bridge Bolt
|
40.6B0.6095
|
40.6B0.6097
|
|
2
|
Bridge Bolt Washer
|
40.220.0002
|
40.220.0002
|
|
3
|
STR-60 Bridge (Black Anodized)
|
32.639.N10R | 32.649.N10R |
|
4
|
TIME-SERT M6x1.0
|
40.160.0001
|
40.160.0001
|
|
5
|
Bleed Screw
|
41.000.0011
|
41.000.0011
|
|
6
|
Bleed Screw Cap
|
780.09450
|
780.09450
|
|
7
|
Crossover Tube
|
41.400.0105
|
41.400.0106
|
|
8
|
Abutment Plate Kit
|
89.030.0012 | 89.030.0012 |
|
9
|
Body Bolt, M10x1.5
|
40.601.0090 (90mm)
|
40.601.0096 (96mm)
|
|
10
|
Body Bolt, M10x1.5
|
40.6B1.0080 (80mm)
|
40.601.0085 (85mm)
|
|
11
|
Body Bolt, M10x1.5
|
40.6B1.0070 (70mm)
|
40.6B1.0075 (75mm)
|
|
12
|
Body Bolt Washer, M10
|
40.220.0003
|
40.220.0003
|
|
16
|
Jet Nut (M10x1.5)
|
40.150.0000
|
40.150.0000
|
StopTech STR-60 Gen4 Trophy Sport calipers use application-specific piston sizing, with pistons ranging in diameter from 26mm to 46mm. These are typically staggered, with larger trailing pistons used. Thus, pistons are NOT all the same size. STR-60 Gen4 calipers use "tall" pistons, 32mm in length. Pressure Seals (#13), Pistons (#14), and Dust Boots (#15) may be ordered here: Rebuild Parts
Brake pads may be ordered here: STR-60 Pads
All other STR-60 hardware is listed below.
Brembo bleed screw cap for big brake kit and OEM calipers
Brembo rubber bleed screw cap for various OEM and Brembo big brake kit calipers. May also be used for StopTech…
- Manufacturer
- Brembo
- Model
- 05150220
Brembo bleed screw for big brake kit and OEM calipers - M10x1.0mm
Brembo replacement bleed screw for various OEM and Brembo big brake kit calipers. May also be used for StopTech calipers.…
- Manufacturer
- Brembo
- Model
- 05281213
Jet Nut Washers M12, 18mm OD, 12mm ID (5 sets in stock)
Washers (QTY 2) for StopTech Jet nuts. Also used with StopTech ST-22 and ST-45 caliper mounting bolts and caliper body…
- Manufacturer
- StopTech
- Model
- 40.220.0001K