Displaying 1 to 56 (of 56 products)
Brake pad wear sensor, Length = 27 inches…
- Manufacturer
- Centric
- Model
- 64-116-34046
Brake pad wear sensor, Length = 43 inches…
- Manufacturer
- Centric
- Model
- 64-116-34034
Caliper rebuild kit - front (57mm piston) consisting of one dust boot and pressure seal to rebuild one caliper. May…
- Manufacturer
- Centric
- Model
- 143.34022
Caliper rebuild kit - rear (44mm piston) consisting of one dust boot and pressure seal to rebuild one caliper. May…
- Manufacturer
- Centric
- Model
- 143.39018
Centric Premium High Carbon front 348x30mm 1-piece vented rotor…
- Manufacturer
- Centric
- Model
- 125.34093
Centric Premium High Carbon rear 336x22mm 1-piece vented rotor…
- Manufacturer
- Centric
- Model
- 125.34080
Ferodo DS1.11 Race pads have a very high coefficient of friction only slightly lower than DS3000, but with drastically longer…
- Manufacturer
- Ferodo
- Model
- 63-390-0918
Ferodo DS2500 Club Race pads can be used on the street and for light to medium track duty. Good cold…
- Manufacturer
- Ferodo
- Model
- 63-360-0918
Ferodo DS2500 Club Race pads can be used on the street and for light to medium track duty. Good cold…
- Manufacturer
- Ferodo
- Model
- 63-360-1170
Ferodo DS3.12 Race pads have the highest coefficient of friction and fade resistance of any Ferodo compounds. Stable performance up…
- Manufacturer
- Ferodo
- Model
- 63-393-0918
Ferodo DS3000 Race pads have very high coefficient of friction of about 0.62, a flat torque output over its operating…
- Manufacturer
- Ferodo
- Model
- 63-350-0918
Ferodo DSUNO Race pads are based on the DS1.11 endurance pads, but with higher bite and slightly higher torque, trading…
- Manufacturer
- Ferodo
- Model
- 63-392-0918
Hawk Blue 9012 Race pads have a stable torque curve, good bite, and a MOT of 1,050 degrees F. Low…
- Manufacturer
- Hawk
- Model
- 63-450-0918
Hawk DTC-30 is a member of the Dynamic Torque Control (DTC) race pad family and is suggested for light to…
- Manufacturer
- Hawk
- Model
- 63-430-0918
Hawk DTC-70 is a member of the Dynamic Torque Control race pad family, with an average level of friction among…
- Manufacturer
- Hawk
- Model
- 63-480-0918
Hawk ER-1 Endurance Racing Brake Pads offer a higher coefficient of friction than competing endurance pads, while maintaining matched or…
- Manufacturer
- Hawk
- Model
- 63-486-0918
Hawk HP PLUS high performance street pads have moderate dust, moderate rotor wear, high initial bite and a Maximum Operating…
- Manufacturer
- Hawk
- Model
- 63-420-0918
Hawk HP PLUS high performance street pads have moderate dust, moderate rotor wear, high initial bite and a Maximum Operating…
- Manufacturer
- Hawk
- Model
- 63-420-1170
Hawk HPS 5.0 high performance street pads produce higher bite and better pedal feel than Hawk HPS, with even lower…
- Manufacturer
- Hawk
- Model
- 63-411-0918
Hawk HPS 5.0 high performance street pads produce higher bite and better pedal feel than Hawk HPS, with even lower…
- Manufacturer
- Hawk
- Model
- 63-411-1170
Hawk HPS high performance street pads have low dust, low noise, and low rotor wear. Slightly higher in friction level…
- Manufacturer
- Hawk
- Model
- 63-410-0918
Hawk HPS high performance street pads have low dust, low noise, and low rotor wear. Slightly higher in friction level…
- Manufacturer
- Hawk
- Model
- 63-410-1170
Hawk HT-10 Race pads have intermediate to high torque, with smooth initial bite, making them ideal for the weekend warrior.…
- Manufacturer
- Hawk
- Model
- 63-490-0918
Hawk Performance Ceramic street pads have extremely low dust, low noise, and low rotor wear. These represent the latest technology…
- Manufacturer
- Hawk
- Model
- 63-443-0918
Hawk Performance Ceramic street pads have extremely low dust, low noise, and low rotor wear. These represent the latest technology…
- Manufacturer
- Hawk
- Model
- 63-443-1170
Pagid RSL1 is an endurance race pad based on the RSL29, with slightly higher friction, bite and fade resistance. Somewhat…
- Manufacturer
- Pagid
- Model
- 63-950-0918
Pagid RSL1 is an endurance race pad based on the RSL29, with slightly higher friction, bite and fade resistance. Somewhat…
- Manufacturer
- Pagid
- Model
- 63-950-1170
Pagid RSL19 is an endurance race pad with medium friction levels, good initial bite and very stable at higher temperatures.…
- Manufacturer
- Pagid
- Model
- 63-909-0918
Pagid RSL19 is an endurance race pad with medium friction levels, good initial bite and very stable at higher temperatures.…
- Manufacturer
- Pagid
- Model
- 63-909-1170
Pagid RSL29 is an endurance race pad based on (and replacing) the popular RSL19, with similar friction levels, slightly higher…
- Manufacturer
- Pagid
- Model
- 63-910-0918
Performance Friction 08 Race pads have smooth initial bite, with torque rising slightly over its operating temperature range, and a…
- Manufacturer
- Performance Friction
- Model
- 63-680-0918
Performance Friction 11 Race pads were developed from the legendary PFC 01 compound, with improvements to bite, modulation, and release…
- Manufacturer
- Performance Friction
- Model
- 63-661-0918
Porterfield R4 Full Race pads are extremely rotor friendly, with consistent modulation throughout their temperature range. The Carbon Kevlar material…
- Manufacturer
- Porterfield
- Model
- AP918-R4
Porterfield R4 Full Race pads are extremely rotor friendly, with consistent modulation throughout their temperature range. The Carbon Kevlar material…
- Manufacturer
- Porterfield
- Model
- AP1170-R4
Porterfield R4-S High Performance Street and Autocross pads are designed for heavy-duty street driving, with better fade resistance and lower…
- Manufacturer
- Porterfield
- Model
- AP918-R4S
Porterfield R4-S High Performance Street and Autocross pads are designed for heavy-duty street driving, with better fade resistance and lower…
- Manufacturer
- Porterfield
- Model
- AP1170-R4S
Centric Posi Quiet Ceramic pads offer extremely long pad life and are Centric's lowest dust pads, keeping wheels cleaner longer.…
- Manufacturer
- Centric
- Model
- 63-105-0918-1
Centric Posi Quiet Ceramic pads offer extremely long pad life and are Centric's lowest dust pads, keeping wheels cleaner longer.…
- Manufacturer
- Centric
- Model
- 63-105-1170
Centric Posi Quiet Semi-Metallic pads offer high friction and initial bite across a wide temperature range. Low dust, low noise…
- Manufacturer
- Centric
- Model
- 63-104-0918-1
Centric Posi Quiet Semi-Metallic pads offer high friction and initial bite across a wide temperature range. Low dust, low noise…
- Manufacturer
- Centric
- Model
- 63-104-1170
StopTech stainless steel braided brake linesImprove pedal feel by replacing stock rubber lines with stainless…
- Manufacturer
- StopTech
- Model
- 950.34013
StopTech stainless steel braided brake linesImprove pedal feel by replacing stock rubber lines with stainless…
- Manufacturer
- StopTech
- Model
- 950.34525
StopTech Sport brake pads offer a combination of high bite, low noise, medium dust, and sufficient operating temperature range to…
- Manufacturer
- StopTech
- Model
- 63-309-0918-1
StopTech Sport brake pads offer a combination of high bite, low noise, medium dust, and sufficient operating temperature range to…
- Manufacturer
- StopTech
- Model
- 63-309-1170
StopTech Sport drilled left front 348x30mm 1-piece vented rotor…
- Manufacturer
- StopTech
- Model
- 128.34093L
StopTech Sport drilled right front 348x30mm 1-piece vented rotor…
- Manufacturer
- StopTech
- Model
- 128.34093R
StopTech Sport drilled left rear 336x22mm 1-piece vented rotor…
- Manufacturer
- StopTech
- Model
- 128.34080L
StopTech Sport drilled right rear 336x22mm 1-piece vented rotor…
- Manufacturer
- StopTech
- Model
- 128.34080R
StopTech Sport slotted & drilled left front 348x30mm 1-piece vented rotor…
- Manufacturer
- StopTech
- Model
- 127.34093L
StopTech Sport slotted & drilled right front 348x30mm 1-piece vented rotor…
- Manufacturer
- StopTech
- Model
- 127.34093R
StopTech Sport slotted & drilled left rear 336x22mm 1-piece vented rotor…
- Manufacturer
- StopTech
- Model
- 127.34080L
StopTech Sport slotted & drilled right rear 336x22mm 1-piece vented rotor…
- Manufacturer
- StopTech
- Model
- 127.34080R
StopTech Sport slotted left front 348x30mm 1-piece vented rotor…
- Manufacturer
- StopTech
- Model
- 126.34093SL
StopTech Sport slotted right front 348x30mm 1-piece vented rotor…
- Manufacturer
- StopTech
- Model
- 126.34093SR
StopTech Sport slotted left rear 336x22mm 1-piece vented rotor…
- Manufacturer
- StopTech
- Model
- 126.34080SL
StopTech Sport slotted right rear 336x22mm 1-piece vented rotor…
- Manufacturer
- StopTech
- Model
- 126.34080SR
Displaying 1 to 56 (of 56 products)