JavaScript seems to be disabled in your browser.

You must have JavaScript enabled in your browser to utilize the functionality of this website. Click here for instructions on enabling javascript in your browser.

Show: 

Result Pages:
Caliper rebuild kit - front (30/34/38mm pistons) to rebuild one 6-piston caliper UNAVAILABLE

Caliper rebuild kit - front (30/34/38mm pistons) to rebuild one 6-piston caliper UNAVAILABLE

Caliper rebuild kit - front (30/34/38mm pistons) consisting of 2 of each size dust boot and pressure seal to rebuild…

Manufacturer
Centric
Model
143.35037
Caliper rebuild kit - rear (30/34mm pistons) to rebuild one 4-piston caliper

Caliper rebuild kit - rear (30/34mm pistons) to rebuild one 4-piston caliper

Caliper rebuild kit - rear (30/34mm pistons) consisting of 2 of each size dust boot and pressure seal to rebuild…

Manufacturer
Centric
Model
143.37011
Ferodo DS2500 race pads - front (D1116/D1365) [1 box required] 55mm radial pad depth

Ferodo DS2500 race pads - front (D1116/D1365) [1 box required] 55mm radial pad depth

Ferodo DS2500 Club Race pads can be used on the street and for light to medium track duty. Good cold…

Manufacturer
Ferodo
Model
63-360-1116
Ferodo DS3000 race pads - front (D1116/D1365) [1 box required] 55mm radial pad depth - BACKORDERED

Ferodo DS3000 race pads - front (D1116/D1365) [1 box required] 55mm radial pad depth - BACKORDERED

Ferodo DS3000 Race pads have very high coefficient of friction of about 0.62, a flat torque output over its operating…

Manufacturer
Ferodo
Model
63-350-1116
Hawk DTC-60 race pads - front (D1116/D1365) [1 box required] 15mm thick

Hawk DTC-60 race pads - front (D1116/D1365) [1 box required] 15mm thick

Hawk DTC-60 is a member of the Dynamic Torque Control race pad family, similar to DTC-70, but less initial bite,…

Manufacturer
Hawk
Model
63-470-1116
Hawk HP Plus brake pads - front (D1116/D1365) [1 box required] 15mm thick

Hawk HP Plus brake pads - front (D1116/D1365) [1 box required] 15mm thick

Hawk HP PLUS high performance street pads have moderate dust, moderate rotor wear, high initial bite and a Maximum Operating…

Manufacturer
Hawk
Model
63-420-1116
Hawk HPS 5.0 brake pads - front (D1116/D1365) [1 box required] 15mm thick

Hawk HPS 5.0 brake pads - front (D1116/D1365) [1 box required] 15mm thick

Hawk HPS 5.0 high performance street pads produce higher bite and better pedal feel than Hawk HPS, with even lower…

Manufacturer
Hawk
Model
63-411-1116
Hawk HPS brake pads - front (D1116/D1365) [1 box required] 15mm thick

Hawk HPS brake pads - front (D1116/D1365) [1 box required] 15mm thick

Hawk HPS high performance street pads have low dust, low noise, and low rotor wear. Slightly higher in friction level…

Manufacturer
Hawk
Model
63-410-1116
Hawk Performance Ceramic brake pads - front (D1116/D1365) [1 box required] 15mm thick

Hawk Performance Ceramic brake pads - front (D1116/D1365) [1 box required] 15mm thick

Hawk Performance Ceramic street pads have extremely low dust, low noise, and low rotor wear. These represent the latest technology…

Manufacturer
Hawk
Model
63-443-1116
Pagid RS14 Black Race Pads -  front (D1116/D1365) [1 box required] 55mm radial pad depth

Pagid RS14 Black Race Pads - front (D1116/D1365) [1 box required] 55mm radial pad depth

Pagid RS14 is a ceramic based friction material with high bite and torque.…

Manufacturer
Pagid
Model
63-904-1116
Pagid RSL19 Yellow Endurance Race Pads -  front (D1116/D1365) [1 box required] 55mm radial pad depth

Pagid RSL19 Yellow Endurance Race Pads - front (D1116/D1365) [1 box required] 55mm radial pad depth

Pagid RSL19 is an endurance race pad with medium friction levels, good initial bite and very stable at higher temperatures.…

Manufacturer
Pagid
Model
63-909-1116
Porterfield R4 race pads - front (D1116) (Special order) [1 box required]

Porterfield R4 race pads - front (D1116) (Special order) [1 box required]

Porterfield R4 Full Race pads are extremely rotor friendly, with consistent modulation throughout their temperature range. The Carbon Kevlar material…

Manufacturer
Porterfield
Model
AP1116-R4
Porterfield R4 race pads - rear (D2043) (Special order) [1 box required] 14.6mm thick

Porterfield R4 race pads - rear (D2043) (Special order) [1 box required] 14.6mm thick

Porterfield R4 Full Race pads are extremely rotor friendly, with consistent modulation throughout their temperature range. The Carbon Kevlar material…

Manufacturer
Porterfield
Model
AP2043-R4
Porterfield R4-S high performance street pads - front (D1116) (Special order) [1 box required]  no sensor

Porterfield R4-S high performance street pads - front (D1116) (Special order) [1 box required] no sensor

Porterfield R4-S High Performance Street and Autocross pads are designed for heavy-duty street driving, with better fade resistance and lower…

Manufacturer
Porterfield
Model
AP1116-R4S
Porterfield R4-S high performance street pads - rear (D2043) (Special order) [1 box required] 14.6mm thick

Porterfield R4-S high performance street pads - rear (D2043) (Special order) [1 box required] 14.6mm thick

Porterfield R4-S High Performance Street and Autocross pads are designed for heavy-duty street driving, with better fade resistance and lower…

Manufacturer
Porterfield
Model
AP2043-R4S
Posi Quiet semi-metallic brake pads - front (D1116-2) [1 box required] sensor, 15.5mm thick BACKORDERED

Posi Quiet semi-metallic brake pads - front (D1116-2) [1 box required] sensor, 15.5mm thick BACKORDERED

Centric Posi Quiet Semi-Metallic pads offer high friction and initial bite across a wide temperature range. Low dust, low noise…

Manufacturer
Centric
Model
63-104-1116-2
StopTech Sport 309-Series brake pads - front (D1116) [1 box required] 15.5mm thick, no sensor

StopTech Sport 309-Series brake pads - front (D1116) [1 box required] 15.5mm thick, no sensor

StopTech Sport brake pads offer a combination of high bite, low noise, medium dust, and sufficient operating temperature range to…

Manufacturer
StopTech
Model
63-309-1116
Result Pages: