(2013)
Result Pages:
Brake pad wear sensor for Land Rover - Front (1 required)
Brake pad wear sensor…
- Manufacturer
- Centric
- Model
- 64-116-22012
Brake pad wear sensor for Land Rover - Rear (1 required)
Brake pad wear sensor…
- Manufacturer
- Centric
- Model
- 64-116-22011
Caliper rebuild kit - front (36/38/40mm pistons) to rebuild one 6-piston caliper
Caliper rebuild kit (36/38/40mm pistons) consisting of 2 of each size dust boot and pressure seal - to rebuild one…
- Manufacturer
- Centric
- Model
- 143.22002
Caliper rebuild kit - rear (43mm piston) to rebuild one caliper UNAVAILABLE
Caliper rebuild kit - rear (43mm piston) consisting of one dust boot, pressure seal, E-clip, and two O-rings to rebuild…
- Manufacturer
- Centric
- Model
- 143.33029
Centric Premium High Carbon front rotor 380x34mm (2 required) - Supersedes 125.22022
Centric Premium High Carbon front 380x34mm 1-piece vented rotor…
- Manufacturer
- Centric
- Model
- 125.22032
Centric Premium High Carbon rear rotor 365x25mm (2 required)
Centric Premium High Carbon rear 365x25mm 1-piece vented rotor…
- Manufacturer
- Centric
- Model
- 125.22024
![Posi Quiet semi-metallic brake pads - front (D1426) [1 box required]](images/PosiQuiet_logoA.jpg "Posi Quiet semi-metallic brake pads - front (D1426) [1 box required]")
Posi Quiet semi-metallic brake pads - front (D1426) [1 box required]
Centric Posi Quiet Semi-Metallic pads offer high friction and initial bite across a wide temperature range. Low dust, low noise…
- Manufacturer
- Centric
- Model
- 63-104-1426
Posi Quiet semi-metallic brake pads - rear (D1692) [1 box required]
Centric Posi Quiet Semi-Metallic pads offer high friction and initial bite across a wide temperature range. Low dust, low noise…
- Manufacturer
- Centric
- Model
- 63-104-1692
![Hawk LTS brake pads - front (D1426) [1 box required]](images/LTS.jpg "Hawk LTS brake pads - front (D1426) [1 box required]")
Hawk LTS brake pads - front (D1426) [1 box required]
Hawk LTS Light Truck & SUV pads are designed for full-sized trucks, SUVs and vans. These are relatively low dust…
- Manufacturer
- Hawk
- Model
- 63-500-1426
Hawk LTS brake pads - rear (D1692) [1 box required]
Hawk LTS Light Truck & SUV pads are designed for full-sized trucks, SUVs and vans. These are relatively low dust…
- Manufacturer
- Hawk
- Model
- 63-500-1692
![Hawk Performance Ceramic brake pads - front (D1426) [1 box required]](images/Ceramic.jpg "Hawk Performance Ceramic brake pads - front (D1426) [1 box required]")
Hawk Performance Ceramic brake pads - front (D1426) [1 box required]
Hawk Performance Ceramic street pads have extremely low dust, low noise, and low rotor wear. These represent the latest technology…
- Manufacturer
- Hawk
- Model
- 63-443-1426
![Porterfield R4-S high performance street pads - front (D1426) (Special order) [1 box required]](images/Porterfield.jpg "Porterfield R4-S high performance street pads - front (D1426) (Special order) [1 box required]")
Porterfield R4-S high performance street pads - front (D1426) (Special order) [1 box required]
Porterfield R4-S High Performance Street and Autocross pads are designed for heavy-duty street driving, with better fade resistance and lower…
- Manufacturer
- Porterfield
- Model
- AP1426-R4S
Porterfield R4-S high performance street pads - rear (D1692) (Special order) [1 box required]
Porterfield R4-S High Performance Street and Autocross pads are designed for heavy-duty street driving, with better fade resistance and lower…
- Manufacturer
- Porterfield
- Model
- AP1692-R4S
StopTech Sport drilled front rotor 380x34mm, Left - Supersedes 128.22022L
StopTech Sport drilled left front 380x34mm 1-piece vented rotor…
- Manufacturer
- StopTech
- Model
- 128.22032L
StopTech Sport drilled front rotor 380x34mm, Right - Supersedes 128.22022R
StopTech Sport drilled right front 380x34mm 1-piece vented rotor…
- Manufacturer
- StopTech
- Model
- 128.22032R
StopTech Sport slotted & drilled front rotor 380x34mm, Left
StopTech Sport slotted & drilled left front 380x34mm 1-piece vented rotor…
- Manufacturer
- StopTech
- Model
- 127.22022L
StopTech Sport slotted & drilled front rotor 380x34mm, Right
StopTech Sport slotted & drilled right front 380x34mm 1-piece vented rotor…
- Manufacturer
- StopTech
- Model
- 127.22022R
StopTech Sport slotted front rotor 380x34mm, Left - Supersedes 126.22022SL
StopTech Sport slotted left front 380x34mm 1-piece vented rotor…
- Manufacturer
- StopTech
- Model
- 126.22032SL
StopTech Sport slotted front rotor 380x34mm, Right - Supersedes 126.22022SR
StopTech Sport slotted right front 380x34mm 1-piece vented rotor…
- Manufacturer
- StopTech
- Model
- 126.22032SR
StopTech Sport slotted rear rotor 365x25mm, Left
StopTech Sport slotted left rear 365x25mm 1-piece vented rotor…
- Manufacturer
- StopTech
- Model
- 126.22024SL
StopTech Sport slotted rear rotor 365x25mm, Right
StopTech Sport slotted right rear 365x25mm 1-piece vented rotor…
- Manufacturer
- StopTech
- Model
- 126.22024SR
Result Pages:
Categories
Manufacturers
- 1 x Hawk DTC-70 race pads - OEM Brembo (D810/D968/D1383) [1 box required] 17mm thick
- 2 x Hawk Performance Ceramic brake pads - front (D1382) [1 box required] 19mm thick
- 2 x Hawk Blue 9012 race pads - OEM Brembo (D810/D968/D1383) [1 box required] 17mm thick
- 1 x Hawk HPS 5.0 brake pads - rear (D1368) [1 box required]
- 1 x Pagid RS14 Black Race Pads - OEM Brembo (D592/D1053) [1 box required] 15mm thick
- 2 x Ferodo DS2500 race pads - OEM Brembo (D592/D1053) [1 box required] 15mm thick
- 1 x Porterfield R4 race pads - front (D681) (Special order) [1 box required]
- 2 x Brake pad wear sensor for BMW - Front
- 4 x Ferodo DS1.11 Endurance race pads - OEM Brembo (D810/D968) [1 box required] sensor slot, 18mm thick
- 1 x Ferodo DS1.11 Endurance race pads - Brembo 6-piston monobloc caliper (wide annulus - 57mm)
- 2 x Ferodo DS1.11 Endurance race pads - front (D1204) [1 box required] BACKORDERED
- 1 x Porterfield R4 race pads - front (D251) (Special order) [1 box required]
- 1 x Ferodo DS1.11 Endurance race pads - race caliper (CP7040-D61) [1 box required] 16.9mm thick
- 2 x Posi Quiet semi-metallic brake pads - OEM Brembo (D592-1) [1 box required] 13.8mm thick
- 2 x Hawk DTC-60 race pads - front (D1001/D1016/D1050) [1 box required] 14.9mm thick, no sensor or damping weights
- 2 x Ferodo DS1.11 Endurance race pads - race caliper (CP2340-D43) [1 box required] 16mm thick
- 2 x Hawk DTC-30 race pads - OEM Brembo (D810/D968/D1383) [1 box required] 17mm thick
- 2 x Porterfield R4 race pads - front (D294) (Special order) [1 box required]
- 1 x Porterfield R4 race pads - front (D829) (Special order) [1 box required] no sensor
- 1 x Hawk DTC-80 race pads - OEM Brembo (D810/D968/D1383) [1 box required] 17mm thick
- 1 x Posi Quiet Ceramic brake pads - OEM Brembo (D592-1) [1 box required] 13.8mm thick BACKORDERED
- 1 x Porterfield R4 race pads - front (D722) (Special order) [1 box required]
- 1 x Hawk DTC-50 race pads - OEM Brembo (D810/D968/D1383) [1 box required] 17mm thick
- 1 x Ferodo DS3000 race pads - front (D1001) [1 box required] 14.7mm thick, no sensor or damping weights
- 1 x Porterfield R4 race pads - front (D590) (Special order) [1 box required] 19mm thick, no sensor
- 1 x Ferodo DS1.11 Endurance race pads - race caliper (FRP3014) [1 box required] 54mm radial depth, 25mm thick, no center eyelet
- 1 x 1-Piece 355x32mm AeroRotor Slotted, Left (Fits Saleen, Roush Mustang. Also fits StopTech 82-330-4700, 82-330-6700 big brake kits)
- 1 x PFC08 race pads - rear (D776/D917/D993/D1135) [1 box required] - might not accommodate sensor
- 1 x Hawk DTC-80 race pads - Brembo 6-piston monobloc caliper (wide annulus - 57mm)
- 1 x StopTech Sport slotted & drilled front rotor 380x34mm, Right
- 1 x Brake pad wear sensor for Audi/Porsche/VW - Rear
- 1 x Hawk DTC-70 race pads - rear (D1368) [1 box required]
- 1 x PFC11 race pads - front (D916) [1 box required]
- 1 x Hawk HPS 5.0 brake pads - OEM Brembo (D810/D968/D1383) [1 box required] 17mm thick
- 1 x Porterfield R4 race pads - Brembo 6-piston monobloc caliper (49mm radial pad depth) (Special Order) [1 box required]
- 1 x Posi Quiet semi-metallic brake pads - rear (D493) [1 box required]
- 1 x Porterfield R4 race pads - front (D422) (Special order) [1 box required]
- 1 x StopTech Sport drilled front rotor 380x34mm, Right - Supersedes 128.22022R
- 1 x Hawk HPS brake pads - front (D1001/D1016/D1050) [1 box required] 14.9mm thick, no sensor or damping weights
- 1 x Porterfield R4-S high performance street pads - rear (D1692) (Special order) [1 box required]
- 1 x Brake pad wear sensor for Audi/Porsche/VW - Front
- 1 x Hawk DTC-60 race pads - front (D1029) [1 box required] 8 pad set, no sensor
- 1 x Hawk HPS 5.0 brake pads - Brembo 6-piston monobloc caliper (wide annulus - 57mm)
- 1 x Posi Quiet Ceramic brake pads - OEM Brembo (D810/D968) [1 box required]
- 1 x Ferodo DS3.12 race pads - OEM Brembo (D592/D1053) [1 box required] 15mm thick
- 1 x Brake pad wear sensor for Audi/Porsche/VW - Front
- 1 x Brake pad wear sensor for Audi/Porsche/VW - Front
- 1 x Bleed Screw for rear brake calipers - M7x1.0mm, sold individually (8 in stock)
- 1 x Porterfield R4 race pads - front (D1078) (Special order) [1 box required]
- 1 x Ferodo DS1.11 Endurance race pads - race caliper (FRP3144) [1 box required] 54mm radial depth, 18mm thick, no center eyelet
- 1 x Posi Quiet Ceramic brake pads - front (D647) [1 box required]
- 1 x Hawk Blue 9012 race pads - OEM Brembo (D592/D1053) [1 box required] 14.5mm thick
- 1 x Brake pad wear sensor for Audi/Porsche/VW - Front
- 1 x Hawk DTC-70 race pads - front (D1001/D1016/D1050) [1 box required] 14.9mm thick, no sensor or damping weights
- 1 x Brake pad wear sensor for Audi/Porsche/VW - Front
- 1 x Porterfield R4-S high performance street pads - Brembo 6-piston monobloc caliper (57mm radial pad depth) (Special Order) [1 box required]
- 1 x Ferodo DS2500 race pads - fits Alcon PNF4498x603 - Monobloc 4-piston caliper
- 1 x Ferodo DS1.11 Endurance race pads - rear (D345/D608) [1 box required] 18mm thick
- 1 x PFC08 race pads - front (D558) [1 box required]
- 1 x Hawk HP Plus brake pads - rear (D1368) [1 box required]
- 1 x Hawk Performance Ceramic brake pads - OEM Brembo (D810/D968/D1383) [1 box required] 17mm thick
- 1 x Ferodo DS2500 race pads - front (D1001-1) [1 box required] 16mm thick, no sensor or damping weights
- 1 x StopTech Racing STR600 brake fluid - 594 F dry, 404 F wet boiling point (1/2 liter)
- 1 x Porterfield R4 race pads - front (D1149) (Special order) [1 box required]
- 1 x Hawk HPS brake pads - front (D1029) [1 box required] 8 pad set, sensor on 2 pads
- 1 x Brake pad wear sensor for BMW - Front
- 1 x Porterfield R4 race pads - front (D639) (Special order) [1 box required] 17mm thick
- 1 x PFC11 race pads - front (D1609) [1 box required] 17mm thick
- 1 x Hawk DTC-50 race pads - front (D1001/D1016/D1050) [1 box required] 14.9mm thick, no sensor or damping weights
- 1 x Ferodo DS1.11 Endurance race pads - OEM Brembo (D345/D608) [1 box required] 18mm thick
- 1 x Hawk Performance Ceramic brake pads - front (D1149/D1298) [1 box required]
- 1 x PFC08 race pads - front (D991M) [1 box required] 60mm radial depth, 17mm thick
- 1 x Porterfield R4 race pads - front (D1977) (Special order) [1 box required] 14.6mm thick
- 1 x Hawk HP Plus brake pads - OEM Brembo (D592/D1053) [1 box required] 14.5mm thick
- 1 x Porterfield R4 race pads - OEM Brembo (D592/D1053) (Special order) [1 box required]
- 1 x Ferodo DS2500 race pads - for AP Racing calipers (CP2195-D38) [1 box required]
- 1 x Brake pad wear sensor for BMW - Front
- 1 x Ferodo DS1.11 Endurance race pads - front (D1977) [1 box required]
- 2 x Hawk DTC-30 race pads - OEM Brembo (D592/D1053) [1 box required] 14.5mm thick
- 1 x Hawk HPS brake pads - rear (D278/D439/D454/D487/D493) [1 box required]
- 1 x PFC08 race pads - rear (D683) [1 box required]
- 1 x 26mm Caliper Rebuild Kit - 2 Dust Boots & Pressure Seals for 26mm pistons
- 1 x Hawk HPS 5.0 brake pads - front (D1001/D1016/D1050) [1 box required] 14.9mm thick, no sensor or damping weights
- 1 x Posi Quiet semi-metallic brake pads - rear (D1368) [1 box required]
- 1 x Ferodo DS2500 race pads - Brembo 6-piston monobloc caliper (wide annulus - 57mm)
- 1 x Hawk HT-10 race pads - OEM Brembo (D810/D968/D1383) [1 box required] 17mm thick
- 1 x Hawk HPS 5.0 brake pads - OEM Brembo (D592/D1053) [1 box required] 14.5mm thick
- 1 x Hawk Performance Ceramic brake pads - OEM Brembo (D592/D1053) [1 box required] 14.5mm thick
- 1 x Porterfield R4 race pads - front (D890) (Special order) [1 box required]
- 1 x Porterfield R4 race pads - front (D409) (Special order) [1 box required]
- 1 x PFC01 race pads - race caliper (DR17) 28mm thick, 62mm radial pad depth [1 box required]
- 1 x Brake pad wear sensor for BMW - Front
- 1 x Porterfield R4 race pads - front (D721) (Special order) [1 box required]
- 1 x Ferodo DS3000 race pads - front (D1029) - [2 boxes required] 4 pad set, no sensor
- 1 x Centric Premium High Carbon front rotor 380x34mm (2 required) - Supersedes 125.22022
- 1 x Ferodo DS3.12 race pads - OEM Brembo (D810/D968) [1 box required] sensor slot, 18mm thick
- 1 x PFC Z-Rated high performance brake pads - front (D1316) [1 box required]
- 1 x Porterfield R4 race pads - front (D1801) (Special order) [1 box required]
- 1 x 28mm Caliper Rebuild Kit - 2 Dust Boots & Pressure Seals for 28mm pistons
- 1 x StopTech Sport 309-series brake pads - rear (D493) [1 box required]
- 1 x StopTech Racing STR660 brake fluid - 622 F dry, 404 F wet boiling point (1/2 liter)
- 1 x Porterfield R4 race pads - front (D1007) (Special order) [1 box required]
- 1 x Ferodo DS2500 race pads - front (D1382) [1 box required] 19mm thick
- 1 x Centric Premium High Carbon rear rotor 365x25mm (2 required)
- 1 x Hawk HP Plus brake pads - Brembo 6-piston monobloc caliper (wide annulus - 57mm)
- 1 x Posi Quiet semi-metallic brake pads - front (D1149) [1 box required]
- 1 x Brake pad wear sensor for BMW - Front
- 1 x Castrol React SRF brake fluid - 590 F dry, 518 F wet boiling (1 Liter)
- 1 x Brake pad wear sensor for Audi/Porsche/VW - Front
- 1 x 1-Piece 380x32mm AeroRotor Slotted, Left (Fits 82-198-6S00)
- 1 x Porterfield R4 race pads - front (D592/D1053) (Special order) [1 box required]
- 1 x Brake pad wear sensor for BMW - Front
- 1 x Bleed Screw for brake calipers - M7x1.0mm, sold individually 8 in stock
- 1 x Porterfield R4 race pads - front (D1633) (Special order) [1 box required]
- 1 x Hawk HT-10 race pads - front (D1029) [1 box required] 8 pad set, no sensor
- 1 x Brembo LCF600 plus Racing Brake Fluid - 601 F dry, 399 F wet boiling point (1/2 liter)
- 1 x Brake pad wear sensor for Audi/Porsche/VW - Front
- 1 x Ferodo DS2500 race pads - Brembo 6-piston monobloc caliper (narrow annulus - 49mm)
- 1 x Ferodo DS1.11 Endurance race pads - front (D1664) [1 box required]
- 1 x Ferodo DS1.11 Endurance race pads - rear (D1598) [1 box required]
- 1 x Hawk LTS brake pads - Brembo 6-piston monobloc caliper (wide annulus - 57mm)
- 1 x Hawk Blue 9012 race pads - Brembo 6-piston monobloc caliper (narrow annulus - 49mm)
- 1 x Ferodo DS1.11 Endurance race pads - race caliper (DR21) [1 box required] 20.4mm thick, 43mm radial depth
- 1 x Brake pad wear sensor for Land Rover - Rear (1 required)
- 1 x Brake pad wear sensor for BMW
- 1 x Porterfield R4-S high performance street pads - front (D1029) (Special order) [1 box required] 8 pad set, no sensor
- 1 x Brake pad wear sensor for BMW - Front
- 1 x PFC Carbon Metallic brake pads - front (D727) [1 box required]
- 1 x Ferodo DS1.11 Endurance race pads - race caliper (D1247) [1 box required] 18mm thick
- 1 x Brake pad wear sensor for Audi/Porsche/VW - Front
- 1 x 1-Piece 355x32mm AeroRotor Slotted, Right (Fits Saleen, Roush Mustang. Also fits StopTech 82-330-4700, 82-330-6700 big brake kits)
- 1 x Ferodo DS1.11 Endurance race pads - Brembo 6-piston monobloc caliper (narrow annulus - 49mm)
- 1 x Hawk HPS brake pads - front (D1149/D1298) [1 box required]
- 1 x Ferodo DS1.11 Endurance race pads - rear (D738/D978/D1134) [1 box required] may not accommodate sensor
- 1 x PFC11 race pads - OEM Brembo (D592/D1053) [1 box required] 15mm thick
- 1 x Brake pad wear sensor for Audi/Porsche/VW - Front
- 1 x Porterfield R4 race pads - front (D1609) 18mm thick (Special order) [1 box required]
$39,844.47
Quick Links