2006 Noble M400 at Lime Rock Park, Photo by Dave Zeckhausen
The Noble's calipers use the same pads, front and back. However, the rear pads must be machined to remove several millimeters of material from the bottom. This is because the rear rotors have a smaller swept height (annulus), despite being the same diameter as the front rotors. A mask or respirator should be worn while rear pads are machined, to avoid inhaling harmful particles. Better yet, an automotive machine shop can remove excess material from the new pads to match the rear pads currently installed.
Displaying 1 to 22 (of 22 products)
Ferodo DS1.11 Race pads have a very high coefficient of friction only slightly lower than DS3000, but with drastically longer…
- Manufacturer
- Ferodo
- Model
- 63-390-1598
Ferodo DS1.11 Race pads have a very high coefficient of friction only slightly lower than DS3000, but with drastically longer…
- Manufacturer
- Ferodo
- Model
- 63-390-1598
Ferodo DS2500 Club Race pads can be used on the street and for light to medium track duty. Good…
- Manufacturer
- Ferodo
- Model
- 63-360-1598
Ferodo DS2500 Club Race pads can be used on the street and for light to medium track duty. Good cold…
- Manufacturer
- Ferodo
- Model
- 63-360-1598
Ferodo DS3.12 Race pads have the highest coefficient of friction and fade resistance of any Ferodo compounds. Stable performance up…
- Manufacturer
- Ferodo
- Model
- 63-393-1598
Ferodo DS3.12 Race pads have the highest coefficient of friction and fade resistance of any Ferodo compounds. Stable performance up…
- Manufacturer
- Ferodo
- Model
- 63-393-1598
Ferodo DSUNO Race pads are based on the DS1.11 endurance pads, but with higher bite and slightly higher torque, trading…
- Manufacturer
- Ferodo
- Model
- 63-392-1598
Ferodo DSUNO Race pads are based on the DS1.11 endurance pads, but with higher bite and slightly higher torque, trading…
- Manufacturer
- Ferodo
- Model
- 63-392-1598
Hawk DTC-70 is the most serious member of their Dynamic Torque Control race pad family, with an average level of…
- Manufacturer
- Hawk
- Model
- 63-480-1598
Hawk DTC-70 is a member of the Dynamic Torque Control race pad family, with an average level of friction among…
- Manufacturer
- Hawk
- Model
- 63-480-1598
Hawk HP PLUS high performance street pads have moderate dust, moderate rotor wear, high initial bite and a Maximum Operating…
- Manufacturer
- Hawk
- Model
- 63-420-1598
Hawk HP PLUS high performance street pads have moderate dust, moderate rotor wear, high initial bite and a Maximum Operating…
- Manufacturer
- Hawk
- Model
- 63-420-1598
Hawk HPS 5.0 high performance street pads produce higher bite and better pedal feel than Hawk HPS, with even lower…
- Manufacturer
- Hawk
- Model
- 63-411-1598
Hawk HPS 5.0 high performance street pads produce higher bite and better pedal feel than Hawk HPS, with even lower…
- Manufacturer
- Hawk
- Model
- 63-411-1598
Hawk Performance Ceramic street pads have extremely low dust, low noise, and low rotor wear. These represent the latest…
- Manufacturer
- Hawk
- Model
- 63-443-1598
Hawk Performance Ceramic street pads have extremely low dust, low noise, and low rotor wear. These represent the latest technology…
- Manufacturer
- Hawk
- Model
- 63-443-1598
Pagid RSL29 is an endurance race pad based on (and replacing) the popular RSL19, with similar friction levels, slightly higher…
- Manufacturer
- Pagid
- Model
- 63-910-1598
Pagid RSL29 is an endurance race pad based on (and replacing) the popular RSL19, with similar friction levels, slightly higher…
- Manufacturer
- Pagid
- Model
- 63-910-1598
Porterfield R4-S High Performance Street and Autocross pads are designed for heavy-duty street driving, with better fade resistance and lower…
- Manufacturer
- Porterfield
- Model
- AP1598-R4S
Porterfield R4-S High Performance Street and Autocross pads are designed for heavy-duty street driving, with better fade resistance and lower…
- Manufacturer
- Porterfield
- Model
- AP1598-R4S
Centric Posi Quiet Semi-Metallic pads offer a high friction level across a wide temperature range. Very low dust, low noise…
- Manufacturer
- Centric
- Model
- 63-104-1598
Centric Posi Quiet Semi-Metallic pads offer high friction and initial bite across a wide temperature range. Low dust, low noise…
- Manufacturer
- Centric
- Model
- 63-104-1598
Displaying 1 to 22 (of 22 products)