Narrow Superlite 4
4-Piston Caliper
Wilwood #7416 Pad
Result Pages:
![Hawk DTC-50 race pads - fits Wilwood Superlite w/Bridge Bolt - 16.5mm thick [1 box required]](images/DTC.jpg "Hawk DTC-50 race pads - fits Wilwood Superlite w/Bridge Bolt - 16.5mm thick [1 box required]")
Hawk DTC-50 race pads - fits Wilwood Superlite w/Bridge Bolt - 16.5mm thick [1 box required]
Hawk DTC-50 is a member of the Dynamic Torque Control race pad family with torque output significantly higher than DTC-60…
- Manufacturer
- Hawk
- Model
- 63-465-WSL-1
Hawk DTC-60 race pads - fits Wilwood Superlite w/Bridge Bolt - 16.5mm thick [1 box required]
Hawk DTC-60 is a member of the Dynamic Torque Control race pad family, similar to DTC-70, but less initial bite,…
- Manufacturer
- Hawk
- Model
- 63-470-WSL-1
Hawk DTC-70 race pads - fits Wilwood Superlite w/Bridge Bolt - 16.5mm thick [1 box required]
Hawk DTC-70 is a member of the Dynamic Torque Control race pad family, with an average level of friction among…
- Manufacturer
- Hawk
- Model
- 63-480-WSL-1
Hawk DTC-80 race pads - fits Wilwood Superlite w/Bridge Bolt - 16.5mm thick [1 box required]
Hawk DTC-80 is the newest and most extreme member of the Dynamic Torque Control race pad family, with the highest…
- Manufacturer
- Hawk
- Model
- 63-485-WSL-1
![Hawk HP Plus brake pads - fits Wilwood Superlite w/Bridge Bolt - 16.5mm thick [1 box required]](images/Hawk_Race.jpg "Hawk HP Plus brake pads - fits Wilwood Superlite w/Bridge Bolt - 16.5mm thick [1 box required]")
Hawk HP Plus brake pads - fits Wilwood Superlite w/Bridge Bolt - 16.5mm thick [1 box required]
Hawk HP PLUS high performance street pads have moderate dust, moderate rotor wear, high initial bite and a Maximum Operating…
- Manufacturer
- Hawk
- Model
- 63-420-WSL-1
![Hawk HPS 5.0 brake pads - fits Wilwood Superlite w/Bridge Bolt - 16.5mm thick [1 box required]](images/HPS_50.jpg "Hawk HPS 5.0 brake pads - fits Wilwood Superlite w/Bridge Bolt - 16.5mm thick [1 box required]")
Hawk HPS 5.0 brake pads - fits Wilwood Superlite w/Bridge Bolt - 16.5mm thick [1 box required]
Hawk HPS 5.0 high performance street pads produce higher bite and better pedal feel than Hawk HPS, with even lower…
- Manufacturer
- Hawk
- Model
- 63-411-WSL-1
![Hawk HPS brake pads - fits Wilwood Superlite w/Bridge Bolt - 16.5mm thick [1 box required]](images/HPS.jpg "Hawk HPS brake pads - fits Wilwood Superlite w/Bridge Bolt - 16.5mm thick [1 box required]")
Hawk HPS brake pads - fits Wilwood Superlite w/Bridge Bolt - 16.5mm thick [1 box required]
Hawk HPS high performance street pads have low dust, low noise, and low rotor wear. Slightly higher in friction level…
- Manufacturer
- Hawk
- Model
- 63-410-WSL-1
Hawk HT-10 race pads - fits Wilwood Superlite w/Bridge Bolt - 16.5mm thick [1 box required]
Hawk HT-10 Race pads have intermediate to high torque, with smooth initial bite, making them ideal for the weekend warrior.…
- Manufacturer
- Hawk
- Model
- 63-490-WSL-1
Result Pages:
Categories
Manufacturers
- 2 x Ferodo DS1.11 Endurance race pads - front (D592/D1053) [1 box required] 15mm thick
- 2 x Ferodo DS1.11 Endurance race pads - front (D174/D961) [1 box required]
- 2 x Ferodo DS1.11 Endurance race pads - front (D1379) [1 box required] 15.5mm thick, no sensor
- 2 x Ferodo DS1.11 Endurance race pads - Brembo 6-piston monobloc caliper (narrow annulus - 49mm)
- 2 x Ferodo DS1.11 Endurance race pads - rear (D1001) [1 box required] 14.7mm thick, no sensor slot or damping weights
- 2 x Ferodo DS1.11 Endurance race pads - front (D829) [1 box required]
- 1 x Ferodo DS1.11 Endurance race pads - StopTech ST-40 caliper (D372/D609) [1 box required] 18mm thick
- 2 x Ferodo DS1.11 Endurance race pads - rear (D683) [1 box required]
- 6 x Ferodo FSF050 Super Formula racing brake fluid - 626 F dry, 392 F wet boiling point (1/2 liter)
- 2 x Ferodo DS1.11 Endurance race pads - front (D1598) [1 box required]
- 1 x Ferodo DS1.11 Endurance race pads - race caliper (DR21) [1 box required] 20.4mm thick, 43mm radial depth
- 2 x Ferodo DS1.11 Endurance race pads - front (D345/D608) [1 box required] 18mm thick
- 2 x Ferodo DS1.11 Endurance race pads - front (D915-2) [1 box required] BACKORDERED
- 2 x Ferodo DS1.11 Endurance race pads - front (D1664) [1 box required]
- 1 x Ferodo DS2500 race pads - for AP Racing calipers (CP2399-D43) [1 box required]
- 1 x Ferodo DS1.11 Endurance race pads - rear (D1417) [1 box required]
- 1 x Ferodo DS1.11 Endurance race pads - front (D776/D917/D1135) [1 box required] may not accommodate wear sensor
- 1 x 28mm diameter StopTech caliper piston - 29.5mm length (36 in stock)
- 1 x Ferodo DS1.11 Endurance race pads - front (D991) [1 box required]
- 1 x Ferodo DS1.11 Endurance race pads - rear (D1598) [1 box required]
- 1 x Ferodo DS1.11 Endurance race pads - rear (D738/D978/D1134) [1 box required] may not accommodate sensor
- 1 x Ferodo DS2500 race pads - for AP Racing calipers (CP2195-D38) [1 box required]
- 1 x Ferodo DS1.11 Endurance race pads - rear (D776/D917/D1135) [1 box required] may not accommodate sensor
- 1 x Ferodo DS1.11 Endurance race pads - front (D810/D968) [1 box required] sensor slot, 18mm thick
- 1 x Ferodo DS1.11 Endurance race pads - rear (D372/D609) [1 box required] 18mm thick
- 2 x Ferodo DS1.11 Endurance race pads - rear (D1740) [1 box required]
- 1 x Ferodo DS1.11 Endurance race pads - front (D1792) [1 box required]
- 1 x Ferodo DS1.11 Endurance race pads - front (D946) [1 box required]
- 1 x Ferodo DS1.11 Endurance race pads - rear (D174/D961) [1 box required]
- 1 x Ferodo DS1.11 Endurance race pads - OEM Brembo (D810/D968) [1 box required] sensor slot, 18mm thick
- 1 x 1-Piece 355x32mm AeroRotor Slotted, Right (Fits Saleen, Roush Mustang. Also fits StopTech 82-330-4700, 82-330-6700 big brake kits)
- 1 x Ferodo DS1.11 Endurance race pads - front (D1648) [1 box required]
- 1 x Ferodo DS1.11 Endurance race pads - front (D372/D609) [1 box required] 18mm thick
- 1 x Ferodo DS1.11 Endurance race pads - rear (D396) [1 box required]
- 1 x Ferodo DS1.11 Endurance race pads - front (D1029) [2 boxes required] 4 pad set, no sensor
- 1 x Ferodo DS1.11 Endurance race pads - fits Alcon B Type, PNF0084X265, PNF4441X714, PNF4441X723, Brembo 07.5139.0, Brembo x9.005.91 - 16mm thick
- 1 x Ferodo DS1.11 Endurance race pads - front (D1001) [1 box required] 14.7mm thick, no sensor or damping weights
- 1 x Ferodo DS2500 race pads - front (D1007) [1 box required]
- 1 x 28mm Caliper Rebuild Kit - 2 Dust Boots & Pressure Seals for 28mm pistons
- 1 x Ferodo DS1.11 Endurance race pads - race caliper (CP7600-D46) [1 box required] 16mm thick
- 1 x 34mm diameter StopTech caliper piston - 29.5mm length UNAVAILABLE
- 5 x StopTech Racing STR660 brake fluid - 622 F dry, 404 F wet boiling point (1/2 liter)
- 1 x Ferodo DS2500 race pads - for AP Racing calipers (CP2270-D50, CP2271) [1 box required]
- 1 x Ferodo DS1.11 Endurance race pads - rear (D536/D537) [1 box required]
- 1 x Ferodo DS1.11 Endurance race pads - race caliper (DR98) [1 box required] 20.4mm thick, 50mm radial depth
- 1 x Ferodo DS1.11 Endurance race pads - race caliper (CP3215D-50) [1 box required] 16.6mm thick
- 1 x Ferodo DS2500 race pads - front (D1001) [1 box required] 14.7mm thick, no sensor or damping weights
- 1 x Ferodo DS1.11 Endurance race pads - race caliper (D1247) [1 box required] 18mm thick
- 1 x 1-Piece 355x32mm AeroRotor Slotted, Left (Fits Saleen, Roush Mustang. Also fits StopTech 82-330-4700, 82-330-6700 big brake kits)
- 1 x Ferodo DS1.11 Endurance race pads - rear (D1718/D1854) [1 box required]
- 1 x Ferodo DS1.11 Endurance race pads - rear (D1300) [1 box required] 17mm thick
- 1 x Ferodo DS2500 race pads - Brembo 6-piston monobloc caliper (narrow annulus - 49mm)
- 1 x Ferodo DS2500 race pads - front (D1029) [2 boxes required] 4 pad set, no sensor
- 1 x Ferodo DS1.11 Endurance race pads - front (D1001-1) [1 box required] 16mm thick, no sensor or damping weights
- 1 x 34mm Caliper Rebuild Kit - 2 Dust Boots & Pressure Seals for 34mm pistons
- 1 x Ferodo DS1.11 Endurance race pads - rear (D592/D1053) [1 box required] 15mm thick
- 1 x Ferodo DS1.11 Endurance race pads - race caliper (FRP3144) [1 box required] 54mm radial depth, 18mm thick, no center eyelet
- 1 x 32mm diameter StopTech caliper piston - 32mm length UNAVAILABLE
- 3 x Brembo LCF600 plus Racing Brake Fluid - 601 F dry, 399 F wet boiling point (1/2 liter)
- 1 x Ferodo DS1.11 Endurance race pads - front (D1204) [1 box required] BACKORDERED
- 1 x Ferodo DS1.11 Endurance race pads - rear (D345/D608) [1 box required] 18mm thick
- 1 x Ferodo DS1.11 Endurance race pads - rear (D1599) [1 box required]
- 1 x 28mm diameter StopTech caliper piston - 32mm length UNAVAILABLE
- 1 x Ferodo DS2500 race pads - Brembo 6-piston monobloc caliper (wide annulus - 57mm)
- 1 x Ferodo DS1.11 Endurance race pads - front (D1977) [1 box required]
- 1 x Ferodo DS1.11 Endurance race pads - rear (D1761) [1 box required]
- 1 x 30mm Caliper Rebuild Kit - 2 Dust Boots & Pressure Seals for 30mm pistons
- 1 x Ferodo DS1.11 Endurance race pads - rear (D1124) [1 box required]
- 1 x Ferodo DS1.11 Endurance race pads - front (D1609-1) [1 box required] 15mm thick (BACKORDERED)
- 1 x Ferodo DS1.11 Endurance race pads - rear (D1656) [1 box required]
- 1 x Motul RBF 600 racing brake fluid (Case of 12 bottles) - 594 F dry, 401 F wet boiling point (1/2 liter)
- 3 x StopTech Racing STR600 brake fluid - 594 F dry, 404 F wet boiling point (1/2 liter)
- 1 x Ferodo DS1.11 Endurance race pads - rear (D919) [1 box required]
- 1 x 32mm Caliper Rebuild Kit - 2 Dust Boots & Pressure Seals for 32mm pistons
- 1 x Ferodo DS1.11 Endurance race pads - front (D918) [1 box required] BACKORDERED
- 2 x Motul DOT 5.1 brake fluid (Case of 12 bottles) - 518 F dry, 369 F wet boiling point (1/2 liter)
- 1 x Ferodo DS1.11 Endurance race pads - race caliper (CP7040-D61) [1 box required] 16.9mm thick
- 1 x Motul RBF 660 racing brake fluid (Case of 12 bottles) - 617 F dry, 401 F wet boiling point (1/2 liter)
- 1 x Ferodo DS1.11 Endurance race pads - front (DR770-20) 20mm thick [1 box required] BACKORDERED
- 1 x Ferodo DS1.11 Endurance race pads - front (D1741) [1 box required]
- 1 x 36mm Caliper Rebuild Kit - 2 Dust Boots & Pressure Seals for 36mm pistons
- 1 x 30mm diameter StopTech caliper piston - 29.5mm length (34 in stock)
- 1 x Ferodo DS2500 race pads - front (D1001-1) [1 box required] 16mm thick, no sensor or damping weights
- 1 x 32mm diameter StopTech caliper piston - 29.5mm length UNAVAILABLE
- 1 x Ferodo DS1.11 Endurance race pads - OEM Brembo (D345/D608) [1 box required] 18mm thick
- 1 x Ferodo DS1.11 Endurance race pads - front (D737) [1 box required] may not accommodate sensor
- 1 x 26mm Caliper Rebuild Kit - 2 Dust Boots & Pressure Seals for 26mm pistons
- 1 x Ferodo DS1.11 Endurance race pads - front (D1405) [1 box required] 16.5mm thick, no sensor
- 1 x Ferodo DS1.11 Endurance race pads - front (D731) [1 box required]
- 1 x Ferodo DS1.11 Endurance race pads - rear (D810/D968) [1 box required] sensor slot, 18mm thick
- 1 x 38mm Caliper Rebuild Kit - 2 Dust Boots & Pressure Seals for 38mm pistons
- 1 x 34mm diameter StopTech caliper piston - 32mm length (15 in stock)
- 1 x Ferodo DS2500 race pads - fits Alcon B Type, PNF0084X265, PNF4441X714, PNF4441X723, Brembo 07.5139.0, Brembo x9.005.91 - 16mm thick
- 1 x Caliper bracket for rear 345mm BBK (Fits 83-625-004G) - Left or Right CONTACT US FOR AVAILABILITY
- 1 x Caliper bracket for front 355mm BBK (Fits 83-486-4700, 83-651-4700) - Left or Right CONTACT US FOR AVAILABILITY
- 1 x Stainless lines - for StopTech BBK (83-305-4700)
- 3 x Caliper bracket for front 332mm BBK (Fits 83-260-4600, 83-262-4600) - Left or Right CONTACT US FOR AVAILABILITY
- 1 x Ferodo DS2500 race pads - front (D493) [1 box required]
- 1 x Caliper bracket for front 332mm BBK (Fits 83-622-4600, 83-624-4600) - Left or Right CONTACT US FOR AVAILABILITY
- 1 x Caliper bracket for front 332mm BBK (Fits 83-546-4600) - Left or Right CONTACT US FOR AVAILABILITY
- 1 x Hawk HT-10 race pads - front (D810/D968/D1383) [1 box required] 17mm thick
- 1 x Hawk HPS 5.0 brake pads - front (D810/D968/D1383) [1 box required] 17mm thick
- 1 x C-43 Race caliper, 28/32mm pistons, radial mount, 32mm wide, trailing L UNAVAILABLE
- 1 x Caliper bracket for front 328mm BBK (Fits 83-827-4300) - Left or Right CONTACT US FOR AVAILABILITY
- 1 x Ferodo DS1.11 Endurance race pads - rear (D732) [1 box required]
- 1 x AeroHat for StopTech ARK (Fits 81.187.9911, 81.187.9921, 81.187.9931, 81.187.9941) Right CONTACT US FOR AVAILABILITY
- 1 x Pagid RSL29 Yellow Endurance Race Pads - front (D592/D1053) [1 box required] 15mm thick
- 1 x Ferodo DS2500 race pads - rear (D1417) [1 box required]
- 1 x Rotor hat for front 380x32mm BBK (Fits 83-895-6800, 83-896-6800) - Left or Right CONTACT US FOR AVAILABILITY
- 1 x Rotor hat for front 355x32mm BBK (Fits 83-780-4700 & 83-791-4700) - Left or Right CONTACT US FOR AVAILABILITY
- 1 x Rotor hat for front 355x35mm BBK (Fits 83-143-4C00) - Left or Right CONTACT US FOR AVAILABILITY
- 1 x Pagid RSL19 Yellow Endurance Race Pads - rear (D1018) [1 box required]
- 1 x Pagid RSL19 Yellow Endurance Race Pads - front (D918) [1 box required]
- 1 x Pagid RS14 Black Race Pads - front (D1116/D1365) [1 box required] 55mm radial pad depth
- 1 x Pagid RSL29 Yellow Endurance Race Pads - front (D918) [1 box required]
- 1 x Pagid RSL29 Yellow Endurance Race Pads - front (D372/D609) [1 box required]
- 1 x Pagid RSL1 Yellow Endurance Race Pads - Front (DR770-20) 20mm thick [1 box required]
- 1 x Pagid RS14 Black Race Pads - rear (D738/D1134) [1 box required]
- 1 x Pagid RSL29 Yellow Endurance Race Pads - front (D1185) [1 box required] 12 padlets
- 1 x Pagid RS14 Black Race Pads - front (D1001) [1 box required] 15.9mm thick, no sensor or damping weights
- 1 x Pagid RS14 Black Race Pads - front (D991) [1 box required]
- 1 x Pagid RSL29 Yellow Endurance Race Pads - front (D1179) [1 box required]
- 1 x Pagid RSC1 Street/Race Pads for Ceramic Rotors - front (D991) [1 box required]
- 1 x Pagid RSL19 Yellow Endurance Race Pads - front (D1322) [1 box required]
- 1 x Pagid RSL29 Yellow Endurance Race Pads - front (D1382) [1 box required] 17mm thick, does not accommodate sensor
- 1 x Pagid RSL29 Yellow Endurance Race Pads - front (D594) [1 box required]
- 1 x Pagid RSL29 Yellow Endurance Race Pads - front (D590) [1 box required] 18.5mm thick, no sensor
- 1 x Pagid RSL1 Yellow Endurance Race Pads - front (D1029) [1 box required] 8 pad set, no sensor Special Order
- 1 x Pagid RSL1 Yellow Endurance Race Pads - front (D776/D917/D993/D1135) [1 box required] Special Order
- 1 x Pagid RSL29 Yellow Endurance Race Pads - front (D253/D395) [1 box required]
- 1 x Pagid RS4-4 Orange Race Pads - rear (D608) [1 box required]
- 1 x Hawk DTC-30 race pads - front (D57/D114/D161) [1 box required]
- 1 x Hawk Blue 9012 race pads - rear (D213/D295/D413) [1 box required]
- 1 x Castrol React SRF brake fluid - 590 F dry, 518 F wet boiling (1 Liter)
- 2 x Stainless lines - Front (Also fits StopTech BBK 83-055-4300)
- 1 x Stainless lines - for StopTech BBK (87-D10-4300)
- 1 x Caliper bracket for rear 345mm BBK (Fits 83-135-002G, 83-137-002G) - Left or Right CONTACT US FOR AVAILABILITY
- 1 x Brembo H-Bobbin style floating rotor mounting kit, w/o bushings, 10 mounting holes
- 1 x Posi Quiet Ceramic brake pads - front (D810/D968) [1 box required]
- 1 x Caliper bracket for rear 355mm BBK (Fits 83-241-0047) - Left or Right CONTACT US FOR AVAILABILITY
- 1 x Caliper bracket for front 355mm WA BBK (Fits 87-193-7S00-R1) - Left or Right CONTACT US FOR AVAILABILITY
- 1 x Caliper bracket for front 380mm BBK (Fits 83-197-6Q00) - Left or Right CONTACT US FOR AVAILABILITY
- 1 x Stainless lines - Front (Also fits StopTech BBK 83-054-4300, 83-057-4300, 83-054-D900, 87-054-D900)
- 1 x Stainless lines - for StopTech BBK (fits 83-886-4300)
- 1 x Caliper bracket for front 355mm BBK (Fits 83-102-4700) - Left or Right CONTACT US FOR AVAILABILITY
- 1 x Caliper bracket for front 328mm BBK (Fits 83-138-4300, 83-159-4300) - Left or Right UNAVAILABLE
- 1 x Caliper bracket for front 380mm BBK (Fits 83-150-6800, 83-152-6800, 83-153-6D00, 83-166-6800, 83-B31-6800, 83-B32-6D00) - Left or Right CONTACT US FOR AVAILABILITY
- 1 x StopTech Sport slotted & drilled rear rotor 308x18mm, Right
- 1 x StopTech Sport slotted front rotor 365x32mm, Right
- 1 x StopTech Sport slotted front rotor 300x28mm, Right
- 1 x Centric Premium front rotor 280x24mm (2 required)
- 1 x Centric Premium rear rotor 285x11mm (2 required)
- 1 x Pagid RSL29 Yellow Endurance Race Pads - rear (D1185A) [1 box required] 8 padlets
- 1 x Hawk HT-10 race pads - front (D682) [1 box required]
- 1 x Caliper rebuild kit - rear (42mm pistons) to rebuild one 2-piston caliper (55 in stock)
- 1 x Hawk LTS brake pads - rear (D1100) [1 box required]
- 1 x Posi Quiet semi-metallic brake pads - rear (D754) [1 box required]
- 1 x Hawk HT-10 race pads - front (D1001/D1016/D1050) [1 box required] 14.9mm thick, no sensor or damping weights
- 1 x Pagid RSL29 Yellow Endurance Race Pads - front (D1001) [1 box required] 15.9mm thick, no sensor or damping weights
- 1 x STR-60 Trophy Sport caliper, 30/34/36mm pistons, 35mm wide, leading L UNAVAILABLE
- 1 x STR-60 Trophy Sport caliper, 34/36/38mm pistons, 32mm wide, leading R UNAVAILABLE
- 1 x STR-60 Trophy Sport caliper, 38/40/42mm pistons, 32mm wide, leading L UNAVAILABLE
- 1 x Hawk DTC-80 race pads - front (D810/D968/D1383) [1 box required] 17mm thick
- 1 x Hawk DTC-70 race pads - rear (D810/D968/D1383) [1 box required] 17mm thick
- 1 x Hawk HPS brake pads - front (D109/D174/D961) [1 box required]
- 1 x Caliper bracket for front 328mm BBK (Fits 83-054-4300, 83-057-4300, 83-433-4300) - Left or Right CONTACT US FOR AVAILABILITY
- 1 x Stainless lines - Front (Also fits StopTech BBK 83-551-4300, 83-551-4700, 87-551-4300)
- 1 x StopTech Sport slotted & drilled rear rotor 285x11mm, Right
- 1 x StopTech Sport slotted & drilled front rotor 326x30mm, Right
- 1 x StopTech Sport 309-Series brake pads - rear (D961) [1 box required]
- 1 x Porterfield R4-S high performance street pads - front (D1001) (Special order) [1 box required] no sensor or damping weights
- 1 x StopTech Sport drilled rear rotor 315x20mm, Left
- 1 x Hawk DTC-70 race pads - front (D1001/D1016/D1050) [1 box required] 14.9mm thick, no sensor or damping weights
- 1 x Hawk DTC-50 race pads - front (D1001/D1016/D1050) [1 box required] 14.9mm thick, no sensor or damping weights
- 1 x STR-60 Trophy Sport caliper, 34/36/40mm pistons, 35mm wide, trailing L UNAVAILABLE
- 1 x STR-60 Trophy Sport caliper, 34/36/38mm pistons, 34mm wide, trailing L UNAVAILABLE
- 1 x STR-60 Trophy Sport caliper, 28/28/34mm pistons, 35mm wide, trailing L UNAVAILABLE
- 1 x STR-60 Trophy Sport caliper, 30/34/36mm pistons, 35mm wide, trailing R UNAVAILABLE
- 1 x STR-60 Trophy Sport caliper, 30/34/34mm pistons, 32mm wide, leading R UNAVAILABLE
- 1 x STR-60 Trophy Sport caliper, 30/30/34mm pistons, 32mm wide, leading R UNAVAILABLE
- 1 x STR-60 Trophy Sport caliper, 36/38/42mm pistons, 35mm wide, trailing L UNAVAILABLE
- 1 x Caliper bracket for rear 355mm BBK (Fits 83-263-0047) - Left or Right CONTACT US FOR AVAILABILITY
- 1 x Stainless lines - Front (Also fits StopTech BBK 83-192-6700, 83-193-6700, 83-193-6800, 87-193-7S00)
- 1 x Posi Quiet semi-metallic brake pads - rear (D1386) [1 box required]
- 1 x Caliper bracket for front 355mm BBK (Fits 83-260-6700, 83-261-6700, 83-262-6700) - Left or Right CONTACT US FOR AVAILABILITY
- 1 x Caliper bracket for front 332mm BBK (Fits 83-131-4600) - Left or Right CONTACT US FOR AVAILABILITY
- 1 x Stainless lines - for StopTech BBK (Fits 83-131-4600, 83-131-4700, 83-137-4600, 83-137-4700, 83-137-6700, 83-137-6800, 82-155-4700, 83-155-4700, 83-155-6700, 83-156-6800, 87-137-D600)
- 1 x Stainless lines - for StopTech BBK (Fits 83-782-DT00, 83-782-FT00, 87-782-FU00, 83-784-DT00)
- 1 x Stainless lines - for StopTech BBK (fits 83-114-6700, 83-114-6800, 83-119-4600, 83-119-6700)
- 1 x Caliper bracket for rear 328mm BBK (Fits 83-130-0023) - Right CONTACT US FOR AVAILABILITY
- 1 x Caliper bracket for front 328mm BBK (Fits 83-055-4300, 83-427-4300, 83-431-4300) - Left or Right CONTACT US FOR AVAILABILITY
- 1 x Caliper bracket for rear 355mm BBK (Fits 83-135-0047) - Right and (Fits 83-137-0047, 83-155-0047, 83-156-0047) - Left CONTACT US FOR AVAILABILITY
$75,597.21
Quick Links