AP Racing Brake Pads

Brake Pads for AP Racing Big Brake Kits and Calipers

Zeckhausen Racing carries a wide selection of street and racing brake pads for AP Racing® calipers.

We provide five different ways to find brake pads for your AP Racing calipers!

1. Click the image of the AP Racing caliper below that most closely resembles yours.
2. Select your AP Racing caliper part number, below the caliper photo (e.g. CP5060).
3. Select the AP Racing pad type used by your calipers, below each photo (e.g. CP3894D54).
4. Compare the shape and dimensions of your pads to the drawings at each web page linked below.
5. We can help ID your brakes!  To save time, be prepared to email photos of calipers and/or pads.

Some AP Racing calipers have similar appearance, but use pads of different heights, depending on rotor size.  For example, CP2361 4-piston calipers can accomodate pads either 43mm tall (friction puck only) or 51mm tall.  This puck height is referred to as "radial pad depth" and is designated by the "Dxx" at the end of the AP Racing pad part number.  Thus, CP2340D43 has a 43mm pad depth, while CP2340D51 has a 51mm pad depth.  Both will fit the same caliper, but if you select the wrong one it will protrude too far into the caliper, interfering with the rotor hat, or it will leave a portion of the rotor unswept.  Pay close attention to pad depth to ensure you select the correct parts.