Brake pads compatible with Brembo® GT6 Calipers
Utilizing Narrow Annulus Rotors (49mm radial pad depth)
Pads listed here replace the following Brembo pad part numbers:
07.B314.58
B6517
XA5.71.M2
Ferodo DS1.11 Race pads have a very high coefficient of friction only slightly lower than DS3000, but with drastically longer…
Ferodo DS2500 Club Race pads can be used on the street and for light to medium track duty. Good cold…
Ferodo DS3000 Race pads have very high coefficient of friction of about 0.62, a flat torque output over its operating…
Ferodo DSUNO Race pads are based on the DS1.11 endurance pads, but with higher bite and slightly higher torque, trading…
Hawk Blue 9012 Race pads have a stable torque curve, good bite, and a MOT of 1,050 degrees F. Low…
Hawk DTC-30 is a member of the Dynamic Torque Control (DTC) race pad family and is suggested for light to…
Hawk DTC-60 is a member of the Dynamic Torque Control race pad family, similar to DTC-70, but less initial bite,…
Hawk DTC-70 is a member of the Dynamic Torque Control race pad family, with an average level of friction among…
Hawk DTC-80 is the newest and most extreme member of the Dynamic Torque Control race pad family, with the highest…
Hawk HP PLUS high performance street pads have moderate dust, moderate rotor wear, high initial bite and a Maximum Operating…
Hawk HPS 5.0 high performance street pads produce higher bite and better pedal feel than Hawk HPS, with even lower…
Hawk HPS high performance street pads have low dust, low noise, and low rotor wear. Slightly higher in friction level…
Pagid RSL29 is an endurance race pad based on (and replacing) the popular RSL19, with similar friction levels, slightly higher…
Porterfield R4 Full Race pads are extremely rotor friendly, with consistent modulation throughout their temperature range. The Carbon Kevlar material…
Porterfield R4-S High Performance Street and Autocross pads are designed for heavy-duty street driving, with better fade resistance and lower…