Displaying 1 to 53 (of 53 products)
Brake pad wear sensor…
- Manufacturer
- Centric
- Model
- 64-116-37021
Brake pad wear sensor, Length = 19.5 inches…
- Manufacturer
- Centric
- Model
- 64-116-37018
Caliper rebuild kit - rear (28/30mm pistons) consisting of 2 of each size dust boot and pressure seal to rebuild…
- Manufacturer
- Centric
- Model
- 143.37009
Centric Premium High Carbon front 298x24mm 1-piece vented rotor…
- Manufacturer
- Centric
- Model
- 125.37030
Centric Premium High Carbon rear 291x20mm 1-piece vented rotor…
- Manufacturer
- Centric
- Model
- 125.37031
Hardware kit consisting of parts for two brake calipers…
- Manufacturer
- Centric
- Model
- 117.37008
Hardware kit consisting of parts for two brake calipers…
- Manufacturer
- Centric
- Model
- 117.37008
Ferodo DS1.11 Race pads have a very high coefficient of friction only slightly lower than DS3000, but with drastically longer…
- Manufacturer
- Ferodo
- Model
- 63-390-0737
Ferodo DS1.11 Race pads have a very high coefficient of friction only slightly lower than DS3000, but with drastically longer…
- Manufacturer
- Ferodo
- Model
- 63-390-0738
Ferodo DS2500 Club Race pads can be used on the street and for light to medium track duty. Good cold…
- Manufacturer
- Ferodo
- Model
- 63-360-0737
Ferodo DS2500 Club Race pads can be used on the street and for light to medium track duty. Good cold…
- Manufacturer
- Ferodo
- Model
- 63-360-0738
Hawk Blue 9012 Race pads have a stable torque curve, good bite, and a MOT of 1,050 degrees F. Low…
- Manufacturer
- Hawk
- Model
- 63-450-0737
Hawk Blue 9012 Race pads have a stable torque curve, good bite, and a MOT of 1,050 degrees F. Low…
- Manufacturer
- Hawk
- Model
- 63-450-0738
Hawk DTC-30 is a member of the Dynamic Torque Control (DTC) race pad family and is suggested for light to…
- Manufacturer
- Hawk
- Model
- 63-430-0737
Hawk DTC-30 is a member of the Dynamic Torque Control (DTC) race pad family and is suggested for light to…
- Manufacturer
- Hawk
- Model
- 63-430-0738
Hawk DTC-60 is a member of the Dynamic Torque Control race pad family, similar to DTC-70, but less initial bite,…
- Manufacturer
- Hawk
- Model
- 63-470-0737
Hawk DTC-60 is a member of the Dynamic Torque Control race pad family, similar to DTC-70, but less initial bite,…
- Manufacturer
- Hawk
- Model
- 63-470-0738
Hawk HP PLUS high performance street pads have moderate dust, moderate rotor wear, high initial bite and a Maximum Operating…
- Manufacturer
- Hawk
- Model
- 63-420-0737
Hawk HP PLUS high performance street pads have moderate dust, moderate rotor wear, high initial bite and a Maximum Operating…
- Manufacturer
- Hawk
- Model
- 63-420-0738
Hawk HPS 5.0 high performance street pads produce higher bite and better pedal feel than Hawk HPS, with even lower…
- Manufacturer
- Hawk
- Model
- 63-411-0737
Hawk HPS 5.0 high performance street pads produce higher bite and better pedal feel than Hawk HPS, with even lower…
- Manufacturer
- Hawk
- Model
- 63-411-0738
Hawk HPS high performance street pads have low dust, low noise, and low rotor wear. Slightly higher in friction level…
- Manufacturer
- Hawk
- Model
- 63-410-0737
Hawk HPS high performance street pads have low dust, low noise, and low rotor wear. Slightly higher in friction level…
- Manufacturer
- Hawk
- Model
- 63-410-0738
Hawk HT-10 Race pads have intermediate to high torque, with smooth initial bite, making them ideal for the weekend warrior.…
- Manufacturer
- Hawk
- Model
- 63-490-0737
Hawk HT-10 Race pads have intermediate to high torque, with smooth initial bite, making them ideal for the weekend warrior.…
- Manufacturer
- Hawk
- Model
- 63-490-0738
Hawk Performance Ceramic street pads have extremely low dust, low noise, and low rotor wear. These represent the latest technology…
- Manufacturer
- Hawk
- Model
- 63-443-0737
Hawk Performance Ceramic street pads have extremely low dust, low noise, and low rotor wear. These represent the latest technology…
- Manufacturer
- Hawk
- Model
- 63-443-0738
Pagid RSL29 is an endurance race pad based on (and replacing) the popular RSL19, with similar friction levels, slightly higher…
- Manufacturer
- Pagid
- Model
- 63-910-0737
Pagid RSL29 is an endurance race pad based on (and replacing) the popular RSL19, with similar friction levels, slightly higher…
- Manufacturer
- Pagid
- Model
- 63-910-0738
Performance Friction 08 Race pads have smooth initial bite, with torque rising slightly over its operating temperature range, and a…
- Manufacturer
- Performance Friction
- Model
- 63-680-0737
Porterfield R4 Full Race pads are extremely rotor friendly, with consistent modulation throughout their temperature range. The Carbon Kevlar material…
- Manufacturer
- Porterfield
- Model
- AP737-R4
Porterfield R4-S High Performance Street and Autocross pads are designed for heavy-duty street driving, with better fade resistance and lower…
- Manufacturer
- Porterfield
- Model
- AP737-R4S
Porterfield R4-S High Performance Street and Autocross pads are designed for heavy-duty street driving, with better fade resistance and lower…
- Manufacturer
- Porterfield
- Model
- AP738-R4S
Centric Posi Quiet Ceramic pads offer extremely long pad life and are Centric's lowest dust pads, keeping wheels cleaner longer.…
- Manufacturer
- Centric
- Model
- 63-105-0737
Centric Posi Quiet Ceramic pads offer extremely long pad life and are Centric's lowest dust pads, keeping wheels cleaner longer.…
- Manufacturer
- Centric
- Model
- 63-105-0738
Centric Posi Quiet Semi-Metallic pads offer high friction and initial bite across a wide temperature range. Low dust, low noise…
- Manufacturer
- Centric
- Model
- 63-104-0737
Centric Posi Quiet Semi-Metallic pads offer high friction and initial bite across a wide temperature range. Low dust, low noise…
- Manufacturer
- Centric
- Model
- 63-104-0738
StopTech stainless steel braided brake linesImprove pedal feel by replacing stock rubber lines with stainless…
- Manufacturer
- StopTech
- Model
- 950.37013
StopTech stainless steel braided brake linesImprove pedal feel by replacing stock rubber lines with stainless…
- Manufacturer
- StopTech
- Model
- 950.37013
StopTech Sport brake pads offer a combination of high bite, low noise, medium dust, and sufficient operating temperature range to…
- Manufacturer
- StopTech
- Model
- 63-309-0737
StopTech Sport brake pads offer a combination of high bite, low noise, medium dust, and sufficient operating temperature range to…
- Manufacturer
- StopTech
- Model
- 63-309-0738
StopTech Sport drilled left front 298x24mm 1-piece vented rotor…
- Manufacturer
- StopTech
- Model
- 128.37030L
StopTech Sport drilled right front 298x24mm 1-piece vented rotor…
- Manufacturer
- StopTech
- Model
- 128.37030R
StopTech Sport drilled left rear 291x20mm 1-piece vented rotor…
- Manufacturer
- StopTech
- Model
- 128.37031L
StopTech Sport drilled right rear 291x20mm 1-piece vented rotor…
- Manufacturer
- StopTech
- Model
- 128.37031R
StopTech Sport slotted & drilled left front 298x24mm 1-piece vented rotor…
- Manufacturer
- StopTech
- Model
- 127.37030L
StopTech Sport slotted & drilled right front 298x24mm 1-piece vented rotor…
- Manufacturer
- StopTech
- Model
- 127.37030R
StopTech Sport slotted & drilled left rear 291x20mm 1-piece vented rotor…
- Manufacturer
- StopTech
- Model
- 127.37031L
StopTech Sport slotted & drilled right rear 291x20mm 1-piece vented rotor…
- Manufacturer
- StopTech
- Model
- 127.37031R
StopTech Sport slotted left front 298x24mm 1-piece vented rotor…
- Manufacturer
- StopTech
- Model
- 126.37030SL
StopTech Sport slotted right front 298x24mm 1-piece vented rotor…
- Manufacturer
- StopTech
- Model
- 126.37030SR
StopTech Sport slotted left rear 291x20mm 1-piece vented rotor…
- Manufacturer
- StopTech
- Model
- 126.37031SL
StopTech Sport slotted right rear 291x20mm 1-piece vented rotor…
- Manufacturer
- StopTech
- Model
- 126.37031SR
Displaying 1 to 53 (of 53 products)