Iron Rotors
Brake pad wear sensor for Audi/Porsche/VW - Front
Brake pad wear sensor…
- Manufacturer
- Centric
- Model
- 64-116-37023
Brake pad wear sensor for Audi/Porsche/VW - Rear
Brake pad wear sensor…
- Manufacturer
- Centric
- Model
- 64-116-37032
Caliper rebuild kit - rear (34mm pistons) to rebuild one 4-piston caliper UNAVAILABLE
Caliper rebuild kit - rear (34mm pistons) to rebuild one 4-piston caliper, consisting of 4 of each - 34mm boots,…
- Manufacturer
- Centric
- Model
- 143.90010
Centric Premium front cross-drilled rotor 350x34mm, Left
Centric Premium front cross-drilled 350x34mm 1-piece vented rotor - Left…
- Manufacturer
- Centric
- Model
- 128.37050
Centric Premium front cross-drilled rotor 350x34mm, Right BACKORDERED
Centric Premium front cross-drilled 350x34mm 1-piece vented rotor - Right…
- Manufacturer
- Centric
- Model
- 128.37051
Centric Premium rear cross-drilled rotor 350x28mm, Left BACKORDERED
Centric Premium rear cross-drilled 350x28mm 1-piece vented rotor - Left…
- Manufacturer
- Centric
- Model
- 128.37054
Centric Premium rear cross-drilled rotor 350x28mm, Right BACKORDERED
Centric Premium rear cross-drilled 350x28mm 1-piece vented rotor - Right…
- Manufacturer
- Centric
- Model
- 128.37055
Disc brake hardware kit - Front (1 set required) BACKORDERED
Hardware kit consisting of parts for two brake calipers…
- Manufacturer
- Centric
- Model
- 117.37005
Disc brake hardware kit - Rear (1 set required)
Hardware kit consisting of parts for two brake calipers…
- Manufacturer
- Centric
- Model
- 117.37009
![Ferodo DS1.11 Endurance race pads - front (D991) [1 box required]](images/pad_DS3000.jpg "Ferodo DS1.11 Endurance race pads - front (D991) [1 box required]")
Ferodo DS1.11 Endurance race pads - front (D991) [1 box required]
Ferodo DS1.11 Race pads have a very high coefficient of friction only slightly lower than DS3000, but with drastically longer…
- Manufacturer
- Ferodo
- Model
- 63-390-0991
Ferodo DS1.11 Endurance race pads - rear (D1300) [1 box required] 17mm thick
Ferodo DS1.11 Race pads have a very high coefficient of friction only slightly lower than DS3000, but with drastically longer…
- Manufacturer
- Ferodo
- Model
- 63-390-1300
![Ferodo DS2500 race pads - front (D991) [1 box required]](images/pad_DS2500.jpg "Ferodo DS2500 race pads - front (D991) [1 box required]")
Ferodo DS2500 race pads - front (D991) [1 box required]
Ferodo DS2500 Club Race pads can be used on the street and for light to medium track duty. Good cold…
- Manufacturer
- Ferodo
- Model
- 63-360-0991
Ferodo DS2500 race pads - rear (D1300) [1 box required] 17mm thick
Ferodo DS2500 Club Race pads can be used on the street and for light to medium track duty. Good cold…
- Manufacturer
- Ferodo
- Model
- 63-360-1300
Ferodo DSUNO race pads - rear (D1300) [1 box required] 17mm thick
Ferodo DSUNO Race pads are based on the DS1.11 endurance pads, but with higher bite and slightly higher torque, trading…
- Manufacturer
- Ferodo
- Model
- 63-392-1300
![Hawk DTC-60 race pads - front (D991) [1 box required] 16.1mm thick](images/DTC.jpg "Hawk DTC-60 race pads - front (D991) [1 box required] 16.1mm thick")
Hawk DTC-60 race pads - front (D991) [1 box required] 16.1mm thick
Hawk DTC-60 is a member of the Dynamic Torque Control race pad family, similar to DTC-70, but less initial bite,…
- Manufacturer
- Hawk
- Model
- 63-470-0991
Hawk DTC-60 race pads - rear (D1299/D1300) [1 box required]
Hawk DTC-60 is a member of the Dynamic Torque Control race pad family, similar to DTC-70, but less initial bite,…
- Manufacturer
- Hawk
- Model
- 63-470-1299
Hawk DTC-70 race pads - front (D991) [1 box required] 16.1mm thick
Hawk DTC-70 is a member of the Dynamic Torque Control race pad family, with an average level of friction among…
- Manufacturer
- Hawk
- Model
- 63-480-0991
Hawk DTC-70 race pads - rear (D1299/D1300) [1 box required]
Hawk DTC-70 is a member of the Dynamic Torque Control race pad family, with an average level of friction among…
- Manufacturer
- Hawk
- Model
- 63-480-1299
Hawk DTC-80 race pads - front (D991) [1 box required] 16.1mm thick
Hawk DTC-80 is the newest and most extreme member of the Dynamic Torque Control race pad family, with the highest…
- Manufacturer
- Hawk
- Model
- 63-485-0991
![Hawk HPS brake pads - front (D991) [1 box required]](images/HPS.jpg "Hawk HPS brake pads - front (D991) [1 box required]")
Hawk HPS brake pads - front (D991) [1 box required]
Hawk HPS high performance street pads have low dust, low noise, and low rotor wear. Slightly higher in friction level…
- Manufacturer
- Hawk
- Model
- 63-410-0991
Hawk HPS brake pads - rear (D1299/D1300) [1 box required]
Hawk HPS high performance street pads have low dust, low noise, and low rotor wear. Slightly higher in friction level…
- Manufacturer
- Hawk
- Model
- 63-410-1299
![Hawk Performance Ceramic brake pads - front (D991) [1 box required] 16.1mm thick](images/Ceramic.jpg "Hawk Performance Ceramic brake pads - front (D991) [1 box required] 16.1mm thick")
Hawk Performance Ceramic brake pads - front (D991) [1 box required] 16.1mm thick
Hawk Performance Ceramic street pads have extremely low dust, low noise, and low rotor wear. These represent the latest technology…
- Manufacturer
- Hawk
- Model
- 63-443-0991
Hawk Performance Ceramic brake pads - rear (D1299/D1300) [1 box required]
Hawk Performance Ceramic street pads have extremely low dust, low noise, and low rotor wear. These represent the latest technology…
- Manufacturer
- Hawk
- Model
- 63-443-1299
![Pagid RSL29 Yellow Endurance Race Pads - front (D991) [1 box required]](images/RS29.jpg "Pagid RSL29 Yellow Endurance Race Pads - front (D991) [1 box required]")
Pagid RSL29 Yellow Endurance Race Pads - front (D991) [1 box required]
Pagid RSL29 is an endurance race pad based on (and replacing) the popular RSL19, with similar friction levels, slightly higher…
- Manufacturer
- Pagid
- Model
- 63-910-0991
Pagid RSL29 Yellow Endurance Race Pads - rear (D1300) [1 box required] 17mm Thick
Pagid RSL29 is an endurance race pad based on (and replacing) the popular RSL19, with similar friction levels, slightly higher…
- Manufacturer
- Pagid
- Model
- 63-910-1300
![PFC08 race pads - front (D991M) [1 box required] 60mm radial depth, 17mm thick](images/PF_Pads.jpg "PFC08 race pads - front (D991M) [1 box required] 60mm radial depth, 17mm thick")
PFC08 race pads - front (D991M) [1 box required] 60mm radial depth, 17mm thick
Performance Friction 08 Race pads have smooth initial bite, with torque rising slightly over its operating temperature range, and a…
- Manufacturer
- Performance Friction
- Model
- 63-680-0991M
PFC11 race pads - front (D991M) [1 box required] 60mm radial depth, 17mm thick
Performance Friction 11 Race pads were developed from the legendary PFC 01 compound, with improvements to bite, modulation, and release…
- Manufacturer
- Performance Friction
- Model
- 63-661-0991M
PFC11 race pads - rear (D1299/D1300) [1 box required]
Performance Friction 11 Race pads were developed from the legendary PFC 01 compound, with improvements to bite, modulation, and release…
- Manufacturer
- Performance Friction
- Model
- 63-661-1299
![Porterfield R4-S high performance street pads - front (D991) (Special order) [1 box required]](images/Porterfield.jpg "Porterfield R4-S high performance street pads - front (D991) (Special order) [1 box required]")
Porterfield R4-S high performance street pads - front (D991) (Special order) [1 box required]
Porterfield R4-S High Performance Street and Autocross pads are designed for heavy-duty street driving, with better fade resistance and lower…
- Manufacturer
- Porterfield
- Model
- AP991-R4S
Porterfield R4-S high performance street pads - rear (D1300) (Special order) [1 box required]
Porterfield R4-S High Performance Street and Autocross pads are designed for heavy-duty street driving, with better fade resistance and lower…
- Manufacturer
- Porterfield
- Model
- AP1300-R4S
![Posi Quiet semi-metallic brake pads - front (D991) [1 box required]](images/PosiQuiet_logoA.jpg "Posi Quiet semi-metallic brake pads - front (D991) [1 box required]")
Posi Quiet semi-metallic brake pads - front (D991) [1 box required]
Centric Posi Quiet Semi-Metallic pads offer high friction and initial bite across a wide temperature range. Low dust, low noise…
- Manufacturer
- Centric
- Model
- 63-104-0991
Posi Quiet semi-metallic brake pads - rear (D1300) [1 box required]
Centric Posi Quiet Semi-Metallic pads offer high friction and initial bite across a wide temperature range. Low dust, low noise…
- Manufacturer
- Centric
- Model
- 63-104-1300
Stainless lines - Front UNAVAILABLE
StopTech stainless steel braided brake linesImprove pedal feel by replacing stock rubber lines with stainless…
- Manufacturer
- StopTech
- Model
- 950.37013
Stainless lines - Rear
StopTech stainless steel braided brake linesImprove pedal feel by replacing stock rubber lines with stainless…
- Manufacturer
- StopTech
- Model
- 950.37013
- 2 x Motul DOT 5.1 brake fluid (Case of 12 bottles) - 518 F dry, 369 F wet boiling point (1/2 liter)
- 2 x Posi Quiet Ceramic brake pads - front (D910) [1 box required]
- 1 x Posi Quiet Ceramic brake pads - rear (D911) [1 box required]
- 1 x Motul RBF 660 racing brake fluid (Case of 12 bottles) - 617 F dry, 401 F wet boiling point (1/2 liter)
- 1 x Posi Quiet semi-metallic brake pads - front (D910) [1 box required]
- 1 x Ferodo FSF050 Super Formula racing brake fluid - 626 F dry, 392 F wet boiling point (1/2 liter)
- 1 x Brembo LCF600 plus Racing Brake Fluid - 601 F dry, 399 F wet boiling point (1/2 liter)
- 1 x StopTech Racing STR660 brake fluid - 622 F dry, 404 F wet boiling point (1/2 liter)
- 1 x Porterfield R4-S high performance street pads - rear (D1071) (Special order) [1 box required]
- 1 x Porterfield R4-S high performance street pads - rear (D911) (Special order) [1 box required]
- 1 x StopTech Sport drilled rear rotor 280x12mm, Right
- 1 x StopTech Sport 309-Series brake pads - front (D647) [1 box required]
- 1 x Porterfield R4 race pads - rear (D252) (Special order) [1 box required]
- 1 x Posi Quiet Ceramic brake pads - OEM Brembo (D810/D968) [1 box required]
- 1 x 28mm diameter StopTech caliper piston - 32mm length UNAVAILABLE
- 1 x Pagid RSL29 Yellow Endurance Race Pads - front (D372/D609) [1 box required]
- 1 x StopTech Sport slotted rear rotor 264x13mm, Left
- 1 x PFC08 race pads - rear (D345/D608) [1 box required]
- 1 x Ferodo DS1.11 Endurance race pads - front (D731) [1 box required]
- 1 x Ferodo DS2500 race pads - for AP Racing calipers (CP2399-D43) [1 box required]
- 1 x Ferodo DS1.11 Endurance race pads - rear (D683) [1 box required]
- 1 x Ferodo DS1.11 Endurance race pads - front (D372/D609) [1 box required] 18mm thick
- 1 x Hawk DTC-80 race pads - race caliper (CP3905-D54) [1 box required] 18mm thick, no center eyelet
- 1 x Axxis ULT high performance brake pads - front (D253) [1 box required]
- 1 x StopTech Sport 309-series brake pads - front (D1053) [1 box required] 14.6mm thick
- 1 x Hawk DTC-70 race pads - front (D592/D1053) [1 box required] 14.5mm thick
- 1 x StopTech Sport slotted front rotor 298x24mm, Left
- 1 x Posi Quiet Ceramic brake pads - front (D1053) [1 box required] 14.6mm thick
- 1 x Stainless lines - Front (Also fits StopTech BBK 83-055-4300)
- 1 x Stainless lines - Front (Also fits StopTech BBK 83-336-4600) UNAVAILABLE
- 1 x Brake pad wear sensor for Audi/Porsche/VW - Rear
- 1 x Stainless lines - for StopTech BBK (fits 83-652-4600, 83-652-4700) UNAVAILABLE
- 1 x ATE TYP 200 brake fluid - 536 F dry, 388 F wet boiling point (1 liter)
- 1 x Ferodo DS2500 race pads - Brembo 6-piston monobloc caliper (wide annulus - 57mm)
- 1 x PFC08 race pads - StopTech ST-40 caliper (D372/D609) [1 box required] 17mm thick
- 1 x PFC11 race pads - rear (D31) [1 box required]
- 1 x PFC08 race pads - rear (D776/D917/D993/D1135) [1 box required] - might not accommodate sensor
- 1 x PFC08 race pads - race caliper (D1247) [1 box required] 17mm thick, no center eyelet LIMITED QUANTITIES
- 1 x PFC Z-Rated high performance brake pads - StopTech ST-40 caliper (D372/609) [1 box required] 17mm thick
- 1 x PFC08 race pads - front (D737) [1 box required]
- 1 x PFC11 race pads - front (D916) [1 box required]
- 1 x PFC11 race pads - front (D731) [1 box required]
- 1 x PFC11 race pads - Front (DR770-25) 26mm thick and dyno bedded [1 box required]
- 1 x PFC Z-Rated high performance brake pads - front (D918) [1 box required]
- 1 x PFC Z-Rated high performance brake pads - StopTech ST-60 caliper (D1247) [1 box required]
- 1 x PFC08 race pads - rear (D1299/D1300) [1 box required]
- 1 x PFC08 race pads - PFC ZR27/ZR54 caliper [1 box required] 28mm thick
- 2 x PFC08 race pads - front (D345/D608) [1 box required]
- 1 x PFC08 race pads - rear (D1001) [1 box required] 15mm thick, no sensor or damping weights
- 1 x PFC08 race pads - race caliper (CP3558-D54) 25mm thick, includes center eyelet
- 1 x PFC01 race pads - Front (DR770-20) 20mm thick [1 box required]
- 1 x PFC01 race pads - race caliper (DR40) [1 box required] 25mm thick, Radial Depth 52mm
- 1 x PFC01 race pads - race caliper (CP7600-D46) [1 box required] 16mm thick
- 1 x PFC08 race pads - front (D918) [1 box required]
- 1 x PFC01 race pads - front (D1001) [1 box required] 15mm thick, no sensor or damping weights
- 1 x PFC08 race pads - front (D278/D493) [1 box required]
- 1 x Centric Premium High Carbon rear rotor 280x12mm (2 required)
- 1 x StopTech Sport slotted rear rotor 280x12mm, Right
- 1 x Hawk DTC-60 race pads - OEM Brembo (D810/D968/D1383) [1 box required] 17mm thick
- 1 x AeroHat for StopTech ARK (Fits 81.113.9911, 81.113.9921, 81.113.9931, 81.113.9941) Right UNAVAILABLE
- 1 x Hawk Blue 9012 race pads - rear (D252/D254/D445) [1 box required]
- 1 x Hawk DTC-30 race pads - rear (D1134) [1 box required]
- 1 x AeroHat for front 355x32mm brake rotor upgrade for Dodge Viper (Fits 81.263.9911, 81.263.9921) - Right UNAVAILABLE
- 1 x Bridge for ST-40 caliper, black (28mm wide rotors) UNAVAILABLE
- 1 x Hawk Performance Ceramic brake pads - front (D1389) [1 box required]
- 1 x AeroHat for StopTech ARK (Fits 81.193.9911, 81.193.9921, 81.193.9931, 81.193.9941) Right UNAVAILABLE
- 1 x Disc brake hardware kit - Front (1 set required) BACKORDERED
- 1 x Centric Premium rear cross-drilled rotor 299x20mm (2 required)
- 1 x Hawk HT-10 race pads - front (D810/D968/D1383) [1 box required] 17mm thick
- 1 x StopTech Sport slotted front rotor 280x24mm, Right
- 1 x StopTech Sport slotted front rotor 280x24mm, Left
- 1 x Stainless lines - Front
- 1 x Porterfield R4-S high performance street pads - front (D1648) (Special order) [1 box required]
- 1 x Porterfield R4-S high performance street pads - rear (D1386) (Special order) [1 box required]
- 1 x Hawk Performance Ceramic brake pads - front (D547/D681) [1 box required]
- 1 x C-Tek Standard front rotor 302x20mm (2 required)
- 1 x Ferodo DS2500 race pads - front (D253/D395) [1 box required]
- 1 x Brake pad wear sensor for BMW - Rear
$19,450.80