Centric
C-Tek Standard rear rotor 258x10mm (2 required)
C-Tek Standard rear 258x10mm 1-piece solid rotor…
- Manufacturer
- Centric
- Model
- 121.42051
C-Tek Standard rear rotor 258x18mm (2 required)
C-Tek Standard rear 258x18mm 1-piece vented rotor…
- Manufacturer
- Centric
- Model
- 121.61037
C-Tek Standard rear rotor 258x24mm (2 required)
C-Tek Standard rear 258x24mm 1-piece vented rotor…
- Manufacturer
- Centric
- Model
- 121.61023
C-Tek Standard rear rotor 258x9mm (2 required)
C-Tek Standard rear 258x9mm 1-piece solid rotor…
- Manufacturer
- Centric
- Model
- 121.42053
C-Tek Standard rear rotor 258x9mm (2 required)
C-Tek Standard rear 258x9mm 1-piece vented rotor…
- Manufacturer
- Centric
- Model
- 121.38007
C-Tek Standard rear rotor 259x10mm (2 required)
C-Tek Standard rear 259x10mm 1-piece solid rotor…
- Manufacturer
- Centric
- Model
- 121.34066
C-Tek Standard rear rotor 260x9mm (2 required)
C-Tek Standard rear 260x9mm 1-piece solid rotor…
- Manufacturer
- Centric
- Model
- 121.40045
C-Tek Standard rear rotor 261x10mm (2 required)
C-Tek Standard rear 261x10mm 1-piece solid rotor…
- Manufacturer
- Centric
- Model
- 121.45023
C-Tek Standard rear rotor 262x10mm (2 required)
C-Tek Standard rear 262x10mm 1-piece solid rotor…
- Manufacturer
- Centric
- Model
- 121.46038
C-Tek Standard rear rotor 264x13mm (2 required)
C-Tek Standard rear 264x13mm 1-piece solid rotor…
- Manufacturer
- Centric
- Model
- 121.20000
C-Tek Standard rear rotor 265x10mm (2 required)
C-Tek Standard rear 265x10mm 1-piece vented rotor…
- Manufacturer
- Centric
- Model
- 121.39015
C-Tek Standard rear rotor 265x10mm (2 required)
C-Tek Standard rear 265x10mm 1-piece solid rotor…
- Manufacturer
- Centric
- Model
- 121.46024
C-Tek Standard rear rotor 266x10mm (2 required)
C-Tek Standard rear 266x10mm 1-piece solid rotor…
- Manufacturer
- Centric
- Model
- 121.47011
C-Tek Standard rear rotor 266x18mm (2 required)
C-Tek Standard rear 266x18mm 1-piece vented rotor…
- Manufacturer
- Centric
- Model
- 121.47013
C-Tek Standard rear rotor 266x18mm (2 required)
C-Tek Standard rear 266x18mm 1-piece vented rotor…
- Manufacturer
- Centric
- Model
- 121.46033
C-Tek Standard rear rotor 266x18mm (2 required)
C-Tek Standard rear 266x18mm 1-piece vented rotor…
- Manufacturer
- Centric
- Model
- 121.44018
C-Tek Standard rear rotor 268x20mm (2 required)
C-Tek Standard rear 268x20mm 1-piece vented rotor…
- Manufacturer
- Centric
- Model
- 121.33033
C-Tek Standard rear rotor 269x20mm (2 required)
C-Tek Standard rear 269x20mm 1-piece vented rotor…
- Manufacturer
- Centric
- Model
- 121.33013
C-Tek Standard rear rotor 269x9.6mm (2 required)
C-Tek Standard rear 269x9.6mm 1-piece vented rotor…
- Manufacturer
- Centric
- Model
- 121.42014
C-Tek Standard rear rotor 269x9mm (2 required)
C-Tek Standard rear 269x9mm 1-piece solid rotor…
- Manufacturer
- Centric
- Model
- 121.44115
C-Tek Standard rear rotor 270x9mm (2 required)
C-Tek Standard rear 270x9mm 1-piece solid rotor…
- Manufacturer
- Centric
- Model
- 121.63040
C-Tek Standard rear rotor 272x10mm (2 required)
C-Tek Standard rear 272x10mm 1-piece solid rotor…
- Manufacturer
- Centric
- Model
- 121.34041
C-Tek Standard rear rotor 273x12mm (2 required)
C-Tek Standard rear 273x12mm 1-piece solid rotor…
- Manufacturer
- Centric
- Model
- 121.10004
C-Tek Standard rear rotor 273x20mm (2 required)
C-Tek Standard rear 273x20mm 1-piece vented rotor…
- Manufacturer
- Centric
- Model
- 121.45024
C-Tek Standard rear rotor 278x24mm (2 required)
C-Tek Standard rear 278x24mm 1-piece vented rotor…
- Manufacturer
- Centric
- Model
- 121.35025
C-Tek Standard rear rotor 278x9mm (2 required)
C-Tek Standard rear 278x9mm 1-piece solid rotor…
- Manufacturer
- Centric
- Model
- 121.35018
C-Tek Standard rear rotor 279x10mm (2 required)
C-Tek Standard rear 279x10mm 1-piece solid rotor…
- Manufacturer
- Centric
- Model
- 121.35002
C-Tek Standard rear rotor 280x10mm (2 required)
C-Tek Standard rear 280x10mm 1-piece solid rotor…
- Manufacturer
- Centric
- Model
- 121.34011
C-Tek Standard rear rotor 280x10mm (2 required)
C-Tek Standard rear 280x10mm 1-piece solid rotor…
- Manufacturer
- Centric
- Model
- 121.45064
C-Tek Standard rear rotor 282x12mm (2 required)
C-Tek Standard rear 282x12mm 1-piece solid rotor…
- Manufacturer
- Centric
- Model
- 121.34028
C-Tek Standard rear rotor 282x12mm (2 required)
C-Tek Standard rear 282x12mm 1-piece solid rotor…
- Manufacturer
- Centric
- Model
- 121.34022
C-Tek Standard rear rotor 282x12mm (2 required)
C-Tek Standard rear 282x12mm 1-piece solid rotor …
- Manufacturer
- Centric
- Model
- 121.40050
C-Tek Standard rear rotor 282x20mm (2 required)
C-Tek Standard rear 282x20mm 1-piece vented rotor…
- Manufacturer
- Centric
- Model
- 121.42037
C-Tek Standard rear rotor 282x21mm (2 required)
C-Tek Standard rear 282x21mm 1-piece vented rotor…
- Manufacturer
- Centric
- Model
- 121.40029
C-Tek Standard rear rotor 282x9mm (2 required)
C-Tek Standard rear 282x9mm 1-piece solid rotor…
- Manufacturer
- Centric
- Model
- 121.40058
C-Tek Standard rear rotor 283x25mm (2 required)
C-Tek Standard rear 283x25mm 1-piece vented rotor…
- Manufacturer
- Centric
- Model
- 121.62025
C-Tek Standard rear rotor 284x10mm (2 required)
C-Tek Standard rear 284x10mm 1-piece solid rotor…
- Manufacturer
- Centric
- Model
- 121.34016
C-Tek Standard rear rotor 284x10mm (2 required)
C-Tek Standard rear 284x10mm 1-piece solid rotor…
- Manufacturer
- Centric
- Model
- 121.34017
C-Tek Standard rear rotor 284x12mm (2 required)
C-Tek Standard rear 284x12mm 1-piece solid rotor…
- Manufacturer
- Centric
- Model
- 121.65047
C-Tek Standard rear rotor 284x20mm (2 required)
C-Tek Standard rear 284x20mm 1-piece vented rotor…
- Manufacturer
- Centric
- Model
- 121.46034
C-Tek Standard rear rotor 286x10mm (2 required)
C-Tek Standard rear 286x10mm 1-piece solid rotor…
- Manufacturer
- Centric
- Model
- 121.45054
C-Tek Standard rear rotor 286x18mm (2 required)
C-Tek Standard rear 286x18mm 1-piece vented rotor…
- Manufacturer
- Centric
- Model
- 121.42039
C-Tek Standard rear rotor 288x20mm (2 required)
C-Tek Standard rear 288x20mm 1-piece vented rotor…
- Manufacturer
- Centric
- Model
- 121.61062
C-Tek Standard rear rotor 290x10mm (2 required)
C-Tek Standard rear 290x10mm 1-piece solid rotor…
- Manufacturer
- Centric
- Model
- 121.42026
C-Tek Standard rear rotor 290x10mm (2 required)
C-Tek Standard rear 290x10mm 1-piece vented rotor…
- Manufacturer
- Centric
- Model
- 121.42021
C-Tek Standard rear rotor 290x12mm (2 required)
C-Tek Standard rear 290x12mm 1-piece solid rotor…
- Manufacturer
- Centric
- Model
- 121.61032
C-Tek Standard rear rotor 290x18mm (2 required)
C-Tek Standard rear 290x18mm 1-piece vented rotor…
- Manufacturer
- Centric
- Model
- 121.47025
C-Tek Standard rear rotor 291x16mm (2 required)
C-Tek Standard rear 291x16mm 1-piece vented rotor…
- Manufacturer
- Centric
- Model
- 121.44068
C-Tek Standard rear rotor 291x16mm (2 required)
C-Tek Standard rear 291x16mm 1-piece vented rotor…
- Manufacturer
- Centric
- Model
- 121.44082
C-Tek Standard rear rotor 291x20mm (2 required)
C-Tek Standard rear 291x20mm 1-piece vented rotor…
- Manufacturer
- Centric
- Model
- 121.37031
C-Tek Standard rear rotor 292x16mm (2 required)
C-Tek Standard rear 292x16mm 1-piece vented rotor…
- Manufacturer
- Centric
- Model
- 121.42058
C-Tek Standard rear rotor 292x24mm - Left
C-Tek Standard rear 292x24mm 1-piece vented directional rotor - Left…
- Manufacturer
- Centric
- Model
- 121.61014
C-Tek Standard rear rotor 292x24mm - Right
C-Tek Standard rear 292x24mm 1-piece vented directional rotor - Right…
- Manufacturer
- Centric
- Model
- 121.61012
C-Tek Standard rear rotor 292x9mm (2 required)
C-Tek Standard rear 292x9mm 1-piece solid rotor…
- Manufacturer
- Centric
- Model
- 121.42049
C-Tek Standard rear rotor 294x19mm (2 required)
C-Tek Standard rear 294x19mm 1-piece vented rotor…
- Manufacturer
- Centric
- Model
- 121.34056
C-Tek Standard rear rotor 294x20mm (2 required)
C-Tek Standard rear 294x20mm 1-piece vented rotor…
- Manufacturer
- Centric
- Model
- 121.45052
C-Tek Standard rear rotor 295x10mm (2 required)
C-Tek Standard rear 295x10mm 1-piece vented rotor…
- Manufacturer
- Centric
- Model
- 121.39020
C-Tek Standard rear rotor 295x20mm (2 required)
C-Tek Standard rear 295x20mm 1-piece vented rotor…
- Manufacturer
- Centric
- Model
- 121.66039
C-Tek Standard rear rotor 295x20mm (2 required)
C-Tek Standard rear 295x20mm 1-piece vented rotor…
- Manufacturer
- Centric
- Model
- 121.62053
C-Tek Standard rear rotor 296x20mm (2 required)
C-Tek Standard rear 296x20mm 1-piece vented rotor…
- Manufacturer
- Centric
- Model
- 121.62033
C-Tek Standard rear rotor 296x9.6mm (2 required)
C-Tek Standard rear 296x9.6mm 1-piece vented rotor…
- Manufacturer
- Centric
- Model
- 121.39001
C-Tek Standard rear rotor 297x18mm (2 required)
C-Tek Standard rear 297x18mm 1-piece vented rotor…
- Manufacturer
- Centric
- Model
- 121.42047
C-Tek Standard rear rotor 297x20mm (2 required)
C-Tek Standard rear 297x20mm 1-piece vented rotor…
- Manufacturer
- Centric
- Model
- 121.46053
C-Tek Standard rear rotor 299x24mm (2 required)
C-Tek Standard rear 299x24mm 1-piece vented rotor…
- Manufacturer
- Centric
- Model
- 121.37023
C-Tek Standard rear rotor 300x10mm (2 required)
C-Tek Standard rear 300x10mm 1-piece solid rotor…
- Manufacturer
- Centric
- Model
- 121.34025
C-Tek Standard rear rotor 300x12mm (2 required)
C-Tek Standard rear 300x12mm 1-piece solid rotor…
- Manufacturer
- Centric
- Model
- 121.33127
C-Tek Standard rear rotor 300x20mm (2 required)
C-Tek Standard rear 300x20mm 1-piece vented rotor…
- Manufacturer
- Centric
- Model
- 121.34034
C-Tek Standard rear rotor 300x20mm (2 required)
C-Tek Standard rear 300x20mm 1-piece vented rotor…
- Manufacturer
- Centric
- Model
- 121.34026
C-Tek Standard rear rotor 300x20mm (2 required)
C-Tek Standard rear 300x20mm 1-piece vented rotor…
- Manufacturer
- Centric
- Model
- 121.34091
C-Tek Standard rear rotor 300x20mm (2 required)
C-Tek Standard rear 300x20mm 1-piece vented rotor…
- Manufacturer
- Centric
- Model
- 121.34107
C-Tek Standard rear rotor 300x23mm (2 required)
C-Tek Standard rear 300x23mm 1-piece vented rotor…
- Manufacturer
- Centric
- Model
- 121.35030
C-Tek Standard rear rotor 305x9mm (2 required)
C-Tek Standard rear 305x9mm 1-piece solid rotor…
- Manufacturer
- Centric
- Model
- 121.40063
C-Tek Standard rear rotor 307x16mm (2 required)
C-Tek Standard rear 307x16mm 1-piece vented rotor…
- Manufacturer
- Centric
- Model
- 121.44084
C-Tek Standard rear rotor 310x18mm (2 required)
C-Tek Standard rear 310x18mm 1-piece vented rotor…
- Manufacturer
- Centric
- Model
- 121.44189
C-Tek Standard rear rotor 310x22mm (2 required)
C-Tek Standard rear 310x22mm 1-piece vented rotor…
- Manufacturer
- Centric
- Model
- 121.33102
C-Tek Standard rear rotor 310x22mm (2 required)
C-Tek Standard rear 310x22mm 1-piece vented rotor…
- Manufacturer
- Centric
- Model
- 121.33113
C-Tek Standard rear rotor 312x20mm - Left
C-Tek Standard rear 312x20mm 1-piece vented rotor - left…
- Manufacturer
- Centric
- Model
- 121.34036
C-Tek Standard rear rotor 312x20mm - Right
C-Tek Standard rear 312x20mm 1-piece vented rotor - right…
- Manufacturer
- Centric
- Model
- 121.34037
C-Tek Standard rear rotor 324x12mm (2 required)
C-Tek Standard rear 324x12mm 1-piece solid rotor…
- Manufacturer
- Centric
- Model
- 121.34032
C-Tek Standard rear rotor 325x14mm (2 required)
C-Tek Standard rear 325x14mm 1-piece solid rotor…
- Manufacturer
- Centric
- Model
- 121.35131
C-Tek Standard rear rotor 325x20mm (2 required)
C-Tek Standard rear 325x20mm 1-piece vented rotor…
- Manufacturer
- Centric
- Model
- 121.62067
C-Tek Standard rear rotor 327x20mm (2 required)
C-Tek Standard rear 327x20mm 1-piece vented rotor…
- Manufacturer
- Centric
- Model
- 121.34054
C-Tek Standard rear rotor 330x15mm (2 required)
C-Tek Standard rear 330x15mm 1-piece solid rotor…
- Manufacturer
- Centric
- Model
- 121.20019
C-Tek Standard rear rotor 330x22mm (2 required)
C-Tek Standard rear 330x22mm 1-piece vented rotor…
- Manufacturer
- Centric
- Model
- 121.63037
C-Tek Standard rear rotor 330x22mm (2 required)
C-Tek Standard rear 330x22mm 1-piece vented rotor…
- Manufacturer
- Centric
- Model
- 121.35127
C-Tek Standard rear rotor 330x29mm (2 required)
C-Tek Standard rear 330x29mm 1-piece vented rotor…
- Manufacturer
- Centric
- Model
- 121.66044
C-Tek Standard rear rotor 334x11mm (2 required)
C-Tek Standard rear 334x11mm 1-piece solid rotor…
- Manufacturer
- Centric
- Model
- 121.40072
C-Tek Standard rear rotor 334x14mm (2 required)
C-Tek Standard rear 334x14mm 1-piece solid rotor…
- Manufacturer
- Centric
- Model
- 121.65061
C-Tek Standard rear rotor 341x22mm (2 required)
C-Tek Standard rear 341x22mm 1-piece vented rotor…
- Manufacturer
- Centric
- Model
- 121.51049
C-Tek Standard rear rotor 350x26mm (2 required)
C-Tek Standard rear 350x26mm 1-piece vented rotor…
- Manufacturer
- Centric
- Model
- 121.63065
C-Tek Standard rear rotor 360x28mm (2 required)
C-Tek Standard rear 360x28mm 1-piece vented rotor…
- Manufacturer
- Centric
- Model
- 121.62147
C-Tek Standard rear rotor 365x28mm (2 required)
C-Tek Standard rear 365x28mm 1-piece vented rotor…
- Manufacturer
- Centric
- Model
- 121.62119
C-Tek Standard rear rotor 370x24mm (2 required)
C-Tek Standard rear 370x24mm 1-piece vented rotor…
- Manufacturer
- Centric
- Model
- 121.34103
C-Tek Standard rear rotor 390x39mm (2 required)
C-Tek Standard rear 390x39mm 1-piece vented rotor…
- Manufacturer
- Centric
- Model
- 121.67078
C-Tek Standard slotted & dimpled front rotor 370x30mm (2 required)
C-Tek Standard slotted & dimpled front 370x30mm slotted 1-piece vented rotor…
- Manufacturer
- Centric
- Model
- 226.34142
Caliper hardware kit - Front or Rear (1 set required per axle) BACKORDERED
Caliper hardware kit - Front or Rear…
- Manufacturer
- Centric
- Model
- 117.83001
Caliper hardware pad clip kit - Front (4 pieces, One set services two front calipers) BACKORDERED
Front caliper hardware pad clip kit contains 4 clips to service two front calipers (Does not include caliper pin set…
- Manufacturer
- Centric
- Model
- 117.62058
Caliper hardware pin kit - Front (16 pieces, One set services two front calipers)
Front caliper hardware pin kit contains 16 pins to service two front calipers. Requires 6mm Allen bit for installation. (Does…
- Manufacturer
- Centric
- Model
- 117.62065
![Caliper internal crossover seal - FRONT, sold individually [2 required per caliper] 7 in stock](images/75299000.jpg "Caliper internal crossover seal - FRONT, sold individually [2 required per caliper] 7 in stock")
Caliper internal crossover seal - FRONT, sold individually [2 required per caliper] 7 in stock
Caliper internal crossover seal 10.75mm OD, 7.2mm ID, 1.8mm thickness…
- Manufacturer
- Centric
- Model
- 752.99000
Caliper internal crossover seal - REAR, sold individually [1 required per caliper] 7 in stock
Caliper internal crossover seal 10.75mm OD, 7.2mm ID, 1.8mm thickness…
- Manufacturer
- Centric
- Model
- 752.99000
Categories
Manufacturers
- 1 x Brake pad wear sensor for BMW - Front
- 2 x Motul RBF 660 racing brake fluid (Case of 12 bottles) - 617 F dry, 401 F wet boiling point (1/2 liter)
- 1 x Brake pad wear sensor for Audi/Porsche/VW - Front
- 2 x Brake pad wear sensor for BMW - Front
- 2 x Brake pad wear sensor for BMW - Front
- 2 x StopTech Racing STR660 brake fluid - 622 F dry, 404 F wet boiling point (1/2 liter)
- 2 x Brake pad wear sensor for BMW - Front
- 1 x Hawk LTS brake pads - front (D864, D903, D955, D1013) [1 box required]
- 2 x PFC01 race pads - rear (D1001) [1 box required] 15mm thick, no sensor or damping weights
- 2 x Hawk Blue 9012 race pads - OEM Brembo (D810/D968/D1383) [1 box required] 17mm thick
- 2 x Brake pad wear sensor for BMW - Front
- 2 x Brake pad wear sensor for BMW - Front
- 1 x Hawk Blue 9012 race pads - rear (D340) [1 box required] 15mm thick
- 2 x PFC08 race pads - race caliper (D1247) [1 box required] 17mm thick, no center eyelet LIMITED QUANTITIES
- 2 x StopTech Sport drilled front rotor 384x36mm, (Right drill pattern only - 2 required)
- 1 x Hawk DTC-70 race pads - race caliper (CP3905-D54) [1 box required] 18mm thick, no center eyelet
- 1 x Hawk Blue 9012 race pads - rear (D213/D295/D413) [1 box required]
- 2 x Hawk Blue 9012 race pads - Brembo 6-piston monobloc caliper (wide annulus - 57mm)
- 2 x Pagid RSL29 Yellow Endurance Race Pads - race caliper (D3215D-50) [1 box required] 17mm thick
- 2 x Posi Quiet Ceramic brake pads - rear (D1001) [1 box required] 14.9mm thick, no sensor slot or damping weights
- 2 x Pagid RSL19 Yellow Endurance Race Pads - front (D1111) [1 box required]
- 1 x 32mm diameter StopTech caliper piston - 32mm length UNAVAILABLE
- 1 x StopTech Sport slotted rear rotor 330x11mm, Left
- 2 x Ferodo DS1.11 Endurance race pads - race caliper (FRP3144) [1 box required] 54mm radial depth, 18mm thick, no center eyelet
- 2 x Ferodo DS1.11 Endurance race pads - Brembo 6-piston monobloc caliper (wide annulus - 57mm)
- 2 x Pagid RSL29 Yellow Endurance Race Pads - rear (D1598) [1 box required]
- 3 x Hawk Blue 9012 race pads - front (D1001/D1016/D1050) [1 box required] 14.9mm thick, no sensor or damping weights
- 2 x Porterfield R4 race pads - front (D278) (Special order) [1 box required]
- 2 x PFC Z-Rated high performance brake pads - front (D918) [1 box required]
- 2 x Porterfield R4 race pads - front (D571) (Special order) [1 box required]
- 2 x Porterfield R4 race pads - front (D294) (Special order) [1 box required]
- 1 x StopTech Sport slotted rear rotor 314x20mm, Left
- 1 x Pagid RSL1 Yellow Endurance Race Pads - front (D1742) [1 box required]
- 1 x Hawk HPS 5.0 brake pads - race caliper (CP3905-D54) [1 box required] 18mm thick, no center eyelet
- 1 x PFC Carbon Metallic brake pads - front (D727) [1 box required]
- 1 x Hawk Blue 9012 race pads - rear (D228/D306/D851) [1 box required]
- 1 x Pagid RSC1 Street/Race Pads for Ceramic Rotors - rear (D776/D917/D993/D1135) [1 box required]
- 1 x StopTech Sport 309-Series brake pads - rear (D340) [1 box required]
- 1 x Brake pad wear sensor for BMW
- 1 x Ferodo DS2500 race pads - front (D1001-1) [1 box required] 16mm thick, no sensor or damping weights
- 1 x Pagid RSL29 Yellow Endurance Race Pads - front (D45) [1 box required]
- 1 x Porterfield R4 race pads - front (D847) (Special order) [1 box required]
- 1 x C-Tek Standard front rotor 280x22mm (2 required)
- 1 x Ferodo DS1.11 Endurance race pads - OEM Brembo (D592/D1053) [1 box required] 15mm thick
- 1 x Bleed Screw for brake calipers - M7x1.0mm, sold individually 8 in stock
- 1 x Ferodo DS1.11 Endurance race pads - rear (D738/D978/D1134) [1 box required] may not accommodate sensor
- 1 x Hawk Blue 9012 race pads - front (D460/D647/D1182) [1 box required]
- 1 x Ferodo DS1.11 Endurance race pads - front (D1395) [1 box required]
- 1 x Hawk Blue 9012 race pads - front (D555) [1 box required]
- 1 x Hawk HPS brake pads - race caliper (CP3215-D42) [1 box required] 16.6mm thick BACKORDERED
- 1 x Ferodo DS3000 race pads - race caliper (FRP3014) [1 box required] 54mm radial depth, 25mm thick, no center eyelet
- 1 x Bleed Screw for rear brake calipers - M7x1.0mm, sold individually (8 in stock)
- 3 x Ferodo DS2500 race pads - race caliper (CP3215D-50) [1 box required] 16.6mm thick
- 1 x Pagid RSL1 Yellow Endurance Race Pads - rear (D1300-1) [1 box required] 19mm Thick
- 1 x Pagid RS14 Black Race Pads - rear (D1001) [1 box required] 15.9mm thick, no sensor or damping weights
- 1 x Hawk Blue 9012 race pads - rear (D1082/D1465) [1 box required]
- 1 x StopTech Sport slotted front rotor 315x28mm, Right
- 1 x Porterfield R4 race pads - front (D590) (Special order) [1 box required] 19mm thick, no sensor
- 2 x Hawk Blue 9012 race pads - rear (D1001/D1016/D1050) [1 box required] 14.9mm thick, no sensor or damping weights
- 1 x Porterfield R4 race pads - front (D721) (Special order) [1 box required]
- 1 x Pagid RSL19 Yellow Endurance Race Pads - front (D1322) [1 box required]
- 1 x Ferodo DS3000 race pads - race caliper (CP7600-D46) [1 box required] 16mm thick
- 1 x PFC Z-Rated high performance brake pads - rear (D1317) [1 box required]
- 1 x Hawk HP Plus brake pads - front (D1024/D1117) [1 box required]
- 1 x Pagid RSL29 Yellow Endurance Race Pads - front (D31) [1 box required]
- 1 x PFC08 race pads - front (D1609) [1 box required] 17mm thick
- 1 x StopTech Sport slotted rear rotor 314x20mm, Right
- 1 x Ferodo DS1.11 Endurance race pads - front (D929/D1539) [1 box required]
- 1 x Porterfield R4 race pads - front (D32) (Special order) [1 box required]
- 1 x Pagid RS4-4 Orange Race Pads - rear (D608) [1 box required]
- 1 x Pagid RSL1 Yellow Endurance Race Pads - rear (D1656) [1 box required]
- 1 x Porterfield R4 race pads - front (D702) (Special order) [1 box required]
- 1 x Pagid RS4-4 Orange Race Pads - front (D608) [1 box required]
- 1 x Hawk HPS brake pads - rear (D1001/D1016/D1050) [1 box required] 14.9mm thick, no sensor or damping weights
- 2 x Hawk HPS brake pads - race caliper (CP3215D-50) [1 box required] 16.6mm thick
- 1 x Brake pad wear sensor for Audi/Porsche/VW - Rear
- 1 x Hawk Blue 9012 race pads - rear (D138/D154/D202) [1 box required]
- 1 x Posi Quiet Ceramic brake pads - rear (D954) [1 box required]
- 1 x Caliper rebuild kit - front (40/44mm pistons) to rebuild one 4-piston caliper UNAVAILABLE
- 1 x Ferodo DS2500 race pads - rear (D340) [1 box required]
- 1 x Posi Quiet Ceramic brake pads - front (D1576) [1 box required]
- 1 x 36mm diameter StopTech caliper piston - 32mm length (21 in stock)
- 1 x Hawk HPS 5.0 brake pads - front (D1598) [1 box required]
- 1 x Hawk Blue 9012 race pads - front (D457/D468/D525) [1 box required]
- 1 x Hawk Blue 9012 race pads - front (D503) [1 box required]
- 1 x Pagid RSL1 Yellow Endurance Race Pads - front (D394) [1 box required]
- 1 x StopTech Sport slotted rear rotor 226x10mm, Right
- 1 x Ferodo DS1.11 Endurance race pads - rear (D1124) [1 box required]
- 1 x Pagid RSL1 Yellow Endurance Race Pads - rear (D810/D968) [1 box required] 18mm thick Special Order
- 1 x PFC11 race pads - front (D251/D443) [1 box required]
- 2 x Posi Quiet Ceramic brake pads - rear (D1284) [1 box required]
- 1 x Brembo LCF600 plus Racing Brake Fluid - 601 F dry, 399 F wet boiling point (1/2 liter)
- 1 x 34mm Caliper Rebuild Kit - 2 Dust Boots & Pressure Seals for 34mm pistons
- 1 x Hawk Blue 9012 race pads - front (D592-1/D1053-1) [1 box required] 17mm thick
- 1 x 32mm Caliper Rebuild Kit - 2 Dust Boots & Pressure Seals for 32mm pistons
- 1 x Pagid RSC1 Street/Race Pads for Ceramic Rotors - front (D810/D968) [1 box required]
- 1 x StopTech Sport drilled rear rotor 314x20mm, Left
- 1 x PFC Carbon Metallic brake pads - rear (D909) [1 box required]
- 1 x Posi Quiet Ceramic brake pads - rear (D1071) [1 box required]
- 1 x Posi Quiet Ceramic brake pads - front (D1202) [1 box required]
- 1 x Brake pad wear sensor for BMW - Front
- 1 x Hawk Performance Ceramic brake pads - rear (D1284) [1 box required]
- 1 x Hawk DTC-70 race pads - race caliper (CP3215D-50) [1 box required] 16.6mm thick
- 2 x Ferodo DSUNO race pads - race caliper (CP3215D-50) [1 box required] 16.6mm thick
- 4 x Ferodo DS1.11 Endurance race pads - race caliper (CP3215D-50) [1 box required] 16.6mm thick
- 1 x Stainless lines - Rear
- 1 x StopTech Sport slotted & drilled front rotor 315x28mm, Left
- 1 x PFC01 race pads - race caliper (DR21) [1 box required] 20mm thick
- 1 x Hawk Blue 9012 race pads - front (D635) [1 box required]
- 1 x PFC11 race pads - front (D916) [1 box required]
- 1 x StopTech Sport slotted & drilled rear rotor 314x20mm, Right
- 1 x Porterfield R4-S high performance street pads - front (D1598) (Special order) [1 box required]
- 1 x Ferodo DS1.11 Endurance race pads - OEM Brembo (D345/D608) [1 box required] 18mm thick
- 1 x Ferodo DS1.11 Endurance race pads - rear (D683) [1 box required]
- 1 x StopTech Sport slotted rear rotor 226x10mm, Left
- 1 x Hawk Performance Ceramic brake pads - race caliper (CP3215D-50) [1 box required] 16.6mm thick
- 1 x 34mm diameter StopTech caliper piston - 29.5mm length UNAVAILABLE
- 1 x Hawk Performance Ceramic brake pads - race caliper (CP3905-D54) [1 box required] 18mm thick, no center eyelet
- 1 x Brake pad wear sensor for Audi/Porsche/VW - Rear
- 1 x Porterfield R4 race pads - front (D174) (Special order) [1 box required]
- 1 x Ferodo DS2500 race pads - rear (D1108) [1 box required]
- 1 x Ferodo DS1.11 Endurance race pads - rear (D174/D961) [1 box required]
- 1 x Brake pad wear sensor for Audi/Porsche/VW - Front
- 1 x Brake pad wear sensor for BMW - Front
- 1 x StopTech Sport slotted front rotor 303x28mm, Right
- 1 x Caliper rebuild kit - front (54mm piston) to rebuild one caliper UNAVAILABLE
- 1 x Brake pad wear sensor for Audi/Porsche/VW - Rear
- 1 x Brake pad wear sensor for BMW - Front
- 1 x Hawk Blue 9012 race pads - front (D52/D122/D313) [1 box required]
- 1 x Caliper rebuild kit - rear (40/44mm pistons) to rebuild one 4-piston caliper BACKORDERED
- 1 x Ferodo DS1.11 Endurance race pads - front (D810/D968) [1 box required] sensor slot, 18mm thick
- 1 x Hawk Blue 9012 race pads - fits Alcon B Type, PNF0084X265, PNF4441X714, PNF4441X723, Brembo 07.5139.0, Brembo o x9.005.91 - 15.75mm thick
- 1 x PFC11 race pads - front (D635) [1 box required]
- 2 x Hawk HT-10 race pads - race caliper (CP3215D-50) [1 box required] 16.6mm thick
- 2 x Pagid RSL29 Yellow Endurance Race Pads - front (D1001) [1 box required] 15.9mm thick, no sensor or damping weights
- 1 x Brake pad wear sensor for Audi/Porsche/VW - Front
- 1 x Ferodo DS2500 race pads - for AP Racing calipers (CP2270-D50, CP2271) [1 box required]
- 1 x Brake pad wear sensor for Audi/Porsche/VW - Rear
- 1 x Hawk Blue 9012 race pads - rear (D1336) [1 box required]
- 1 x Hawk HPS 5.0 brake pads - race caliper (HB109B.800) [1 box required] 54mm radial depth, 20.3mm thick, no center eyelet
- 1 x Porterfield R4 race pads - front (D558) (Special order) [1 box required]
- 1 x Porterfield R4 race pads - front (D373) (Special order) [1 box required]
- 1 x Pagid RSL29 Yellow Endurance Race Pads - front (D592/D1053) [1 box required] 15mm thick
- 1 x 1-Piece 380x32mm AeroRotor Slotted, Right (Fits 82-198-6S00)
- 2 x Porterfield R4 race pads - front (D1001) (Special order) [1 box required] no sensor or damping weights
- 1 x Hawk Blue 9012 race pads - front (D841) [1 box required]
- 1 x Hawk Blue 9012 race pads - front (D787) [1 box required]
- 1 x Hawk Blue 9012 race pads - front (D592/D1053) [1 box required] 14.5mm thick
- 1 x Porterfield R4 race pads - front (D266) (Special order) [1 box required]
- 2 x PFC01 race pads - race caliper (CP7600-D46) [1 box required] 16mm thick
- 1 x StopTech Sport slotted & drilled front rotor 288x25mm, Left
- 1 x Pagid RSL1 Yellow Endurance Race Pads - front (GT3 Cup) [1 box required] - 19mm thick, Radial depth 62mm
- 1 x StopTech Racing STR600 brake fluid - 594 F dry, 404 F wet boiling point (1/2 liter)
- 1 x Ferodo DS1.11 Endurance race pads - race caliper (FRP3014) [1 box required] 54mm radial depth, 25mm thick, no center eyelet
- 1 x Porterfield R4 race pads - front (D1007) (Special order) [1 box required]
- 1 x Hawk DTC-80 race pads - race caliper (CP3558-D54) [1 box required] 25mm thick, no center eyelet
- 1 x PFC08 race pads - rear (D776/D917/D993/D1135) [1 box required] - might not accommodate sensor
- 1 x Caliper rebuild kit - front (45mm pistons) to rebuild one 2-piston caliper
- 1 x Hawk Performance Ceramic brake pads - rear (D230/D231/D232/D272/D323/D429/D464) [1 box required]
- 2 x Ferodo DS1.11 Endurance race pads - race caliper (CP7600-D46) [1 box required] 16mm thick
- 1 x PFC11 race pads - front (D45) [1 box required]
- 1 x Porterfield R4 race pads - front (D229) (Special order) [1 box required]
- 1 x Ferodo DS1.11 Endurance race pads - front (D991) [1 box required]
- 1 x Pagid RSL29 Yellow Endurance Race Pads - front (D1633) [1 box required]
- 1 x Brake pad wear sensor for BMW - Front
- 1 x Ferodo DSUNO race pads - race caliper (CP7600-D46) [1 box required] 16mm thick - BACKORDERED
- 2 x StopTech Sport drilled rear rotor 330x22mm, Left
- 2 x Ferodo DS1.11 Endurance race pads - front (D174/D961) [1 box required]
- 3 x Hawk HPS 5.0 brake pads - race caliper (CP3215D-50) [1 box required] 16.6mm thick
- 2 x Porterfield R4 race pads - front (D52/D614) (Special order) [1 box required]
- 2 x Pagid RSL29 Yellow Endurance Race Pads - front (D608) [1 box required]
- 2 x PFC08 race pads - front (D558) [1 box required]
- 2 x Brake pad wear sensor for BMW - Front
- 2 x Ferodo DS1.11 Endurance race pads - front (DR770-20) 20mm thick [1 box required] BACKORDERED
- 4 x Ferodo DS1.11 Endurance race pads - race caliper (DR98) [1 box required] 20.4mm thick, 50mm radial depth
- 1 x Pagid RSL1 Yellow Endurance Race Pads - race caliper (997 GT3 RSR) [1 box required] 29mm thick
- 1 x StopTech Sport drilled rear rotor 260x12mm, Right
- 1 x Brake pad wear sensor for Audi/Porsche/VW - Rear
- 1 x Brake pad wear sensor for BMW - Front
- 1 x Hawk Blue 9012 race pads - front (D917/D993) [1 box required]
- 1 x Hawk Blue 9012 race pads - front (D1029) [1 box required] 8 pad set, no sensor
- 1 x Ferodo DS1.11 Endurance race pads - front (D592/D1053) [1 box required] 15mm thick
- 1 x Pagid RSC1 Street/Race Pads for Ceramic Rotors - front (D1648) [1 box required]
- 2 x Ferodo DS3000 race pads - race caliper (CP3215D-50) [1 box required] 16.6mm thick
- 2 x Ferodo DS1.11 Endurance race pads - race caliper (CP3894-D54) [1 box required] 18mm thick, center eyelet
- 1 x Ferodo DS1.11 Endurance race pads - rear (D1598) [1 box required]
- 1 x Brake pad wear sensor for BMW - Front
- 1 x Ferodo DS3.12 race pads - race caliper (DR98) [1 box required] 20.4mm thick, 50mm radial depth
- 1 x Hawk Blue 9012 race pads - front (D839/D912) [1 box required] 8 pad set, no sensor
- 1 x Ferodo DS1.11 Endurance race pads - front (D1389) [1 box required]
- 1 x Hawk HPS 5.0 brake pads - rear (D1001/D1016/D1050) [1 box required] 14.9mm thick, no sensor or damping weights
- 1 x Pagid RSL1 Yellow Endurance Race Pads - front (D1029) [1 box required] 8 pad set, no sensor Special Order
- 1 x Porterfield R4 race pads - front (D1322) (Special order) [1 box required]
- 1 x Porterfield R4 race pads - front (D890) (Special order) [1 box required]
- 1 x Caliper rebuild kit - rear (42mm piston) to rebuild one caliper UNAVAILABLE
- 1 x Porterfield R4 race pads - front (D1009) (Special order) [1 box required]
- 2 x Pagid RS14 Black Race Pads - front (D1001) [1 box required] 15.9mm thick, no sensor or damping weights
- 1 x Ferodo DS2500 race pads - front (D1107) [1 box required]
- 1 x Pagid RSC1 Street/Race Pads for Ceramic Rotors - front (D1382) [1 box required] 17mm thick, does not accommodate sensor
- 1 x Porterfield R4 race pads - front (D561) (Special order) [1 box required]
- 1 x Porterfield R4 race pads - front (D345/D608) (Special order) [1 box required]
- 1 x Ferodo DS1.11 Endurance race pads - rear (D536/D537) [1 box required]
- 1 x Hawk Blue 9012 race pads - OEM Brembo (D592-1/D1053-1) [1 box required] 17mm thick
- 1 x Brake pad wear sensor for BMW - Front
- 1 x Pagid RSL29 Yellow Endurance Race Pads - front (D394) [1 box required]
- 1 x PFC Z-Rated high performance brake pads - StopTech ST-60 caliper (D1247) [1 box required]
- 1 x Porterfield R4 race pads - front (D1078) (Special order) [1 box required]
- 1 x Ferodo DS2500 race pads - Brembo 6-piston monobloc caliper (narrow annulus - 49mm)
- 2 x PFC01 race pads - race caliper (CP3215D-50) [1 box required] 17mm thick
- 1 x Posi Quiet Extended-Wear brake pads - front (D1070) [1 box required]
- 1 x Ferodo DS1.11 Endurance race pads - front (D1977) [1 box required]
- 1 x Hawk Blue 9012 race pads - front (D687) [1 box required] no sensor
- 3 x Hawk DTC-80 race pads - race caliper (CP3215D-50) [1 box required] 16.6mm thick
- 1 x Hawk Performance Ceramic brake pads - front (D1024/D1117) [1 box required]
- 1 x Brake pad wear sensor for Audi/Porsche/VW - Front
- 1 x Pagid RSL29 Yellow Endurance Race Pads - front (D776/D917/D993/D1135) [1 box required]
- 1 x Pagid RSL19 Yellow Endurance Race Pads - front (D1116/D1365) [1 box required] 55mm radial pad depth
- 1 x Hawk Blue 9012 race pads - front (D8) [1 box required]
- 1 x Ferodo DS1.11 Endurance race pads - front (D1001-1) [1 box required] 16mm thick, no sensor or damping weights
- 1 x Posi Quiet Ceramic brake pads - rear (D813) [1 box required]
- 1 x Ferodo DSUNO race pads - race caliper (CP3215-D42) [1 box required] 16.7mm thick
- 1 x Porterfield R4 race pads - front (D163) (Special order) [1 box required]
- 1 x Porterfield R4 race pads - front (D682) (Special order) [1 box required]
- 1 x PFC08 race pads - rear (D683) [1 box required]
- 1 x Brake pad wear sensor for Audi/Porsche/VW - Rear
- 1 x Brake pad wear sensor for BMW - Front
- 1 x Hawk Blue 9012 race pads - front (D731) [1 box required]
- 1 x StopTech Sport slotted front rotor 360x30mm, Left
- 1 x Hawk Blue 9012 race pads - front (D138/D154/D202) [1 box required]
- 1 x Ferodo DS2500 race pads - front (D1029) [2 boxes required] 4 pad set, no sensor
- 1 x Porterfield R4 race pads - rear (D1001) (Special order) [1 box required] no sensor or damping weights
- 1 x Ferodo DS2500 race pads - fits Alcon B Type, PNF0084X265, PNF4441X714, PNF4441X723, Brembo 07.5139.0, Brembo o x9.005.91 - 16mm thick
- 1 x Ferodo DS1.11 Endurance race pads - front (D1598) [1 box required]
- 1 x Hawk HPS brake pads - rear (D230/D231/D232/D272/D323/D429/D464) [1 box required]
- 1 x Porterfield R4 race pads - front (D505) (Special order) [1 box required]
- 1 x Porterfield R4 race pads - front (D319) (Special order) [1 box required]
- 1 x Hawk HP Plus brake pads - rear (D1001/D1016/D1050) [1 box required] 14.9mm thick, no sensor or damping weights
- 1 x Hawk Blue 9012 race pads - front (D946) [1 box required]
- 1 x Pagid RSL1 Yellow Endurance Race Pads - OEM Brembo (D810/D968) [1 box required] 18mm thick Special Order
- 1 x Hawk Blue 9012 race pads - front (D1081) [1 box required]
- 1 x Ferodo DS1.11 Endurance race pads - front (D394) [1 box required]
- 1 x Porterfield R4 race pads - front (D621) (Special order) [1 box required]
- 1 x Pagid RS4-4 Orange Race Pads - rear (D738/D1134) [1 box required]
- 1 x Pagid RSL29 Yellow Endurance Race Pads - front (D1389) [1 box required]
- 1 x Brake pad wear sensor for BMW - Front
- 1 x Hawk HPS brake pads - rear (D1284) [1 box required]
- 2 x PFC08 race pads - rear (D1001) [1 box required] 15mm thick, no sensor or damping weights
- 1 x PFC08 race pads - front (D918) [1 box required]
- 1 x Brake pad wear sensor for Audi/Porsche/VW - Front
- 1 x Pagid RSL29 Yellow Endurance Race Pads - front (D1349) [1 box required]
- 1 x Hawk Blue 9012 race pads - OEM Brembo (D592/D1053) [1 box required] 14.5mm thick
- 1 x Ferodo DS1.11 Endurance race pads - OEM Brembo (D810/D968) [1 box required] sensor slot, 18mm thick
- 2 x Hawk Blue 9012 race pads - race caliper (HB109E.650) [1 box required] 54mm radial depth, 16.5mm thick, no center eyelet
- 1 x Porterfield R4 race pads - front (D422) (Special order) [1 box required]
- 1 x Hawk HP Plus brake pads - rear (D1108) [1 box required]
- 1 x Ferodo DS3000 race pads - race caliper (CP3894-D54) [1 box required] 18mm thick, center eyelet BACKORDERED
- 1 x Ferodo DS1.11 Endurance race pads - rear (D1300-1) [1 box required] 19mm thick
- 1 x Brake pad wear sensor for Audi/Porsche/VW - Front
- 1 x Pagid RS14 Black Race Pads - race caliper (997 GT3 RSR) [1 box required] 29mm thick
- 1 x Porterfield R4 race pads - front (D245) (Special order) [1 box required]
- 1 x Hawk DTC-70 race pads - rear (D1001/D1016/D1050) [1 box required] 14.9mm thick, no sensor or damping weights
- 1 x Ferodo DS1.11 Endurance race pads - rear (D1761) [1 box required]
- 2 x Ferodo DS3000 race pads - race caliper (DR98) [1 box required] 20.4mm thick, 50mm radial depth
- 1 x Porterfield R4 race pads - front (D242) (Special order) [1 box required]
- 1 x Centric Premium rear rotor 330x11mm (2 required)
- 1 x PFC08 race pads - front (D1001) [1 box required] 15mm thick, no sensor or damping weights
- 1 x Hawk HP Plus brake pads - rear (D230/D231/D232/D272/D323/D429/D464) [1 box required]
- 1 x Hawk Blue 9012 race pads - front (D331/D463/D585) [1 box required]
- 1 x Porterfield R4 race pads - front (D310) (Special order) [1 box required]
- 1 x Ferodo DSUNO race pads - race caliper (FRP3144) [1 box required] 54mm radial depth, 18mm thick, no center eyelet
- 1 x StopTech Sport slotted & drilled front rotor 303x28mm, Left
- 1 x Centric Premium rear rotor 262x10mm (2 required)
- 1 x Hawk DTC-70 race pads - front (D1001/D1016/D1050) [1 box required] 14.9mm thick, no sensor or damping weights
- 1 x 1-Piece 355x32mm AeroRotor Slotted, Right (Fits Saleen, Roush Mustang. Also fits StopTech 82-330-4700, 82-330-6700 big brake kits)
- 1 x PFC01 race pads - race caliper (DR40) [1 box required] 25mm thick, Radial Depth 52mm
- 1 x Hawk Blue 9012 race pads - front (D141/D251/D424/D443/D455) [1 box required] 17.8mm thick
- 1 x PFC11 race pads - front (D394) [1 box required]
- 1 x Hawk Performance Ceramic brake pads - race caliper (CP7600-D46) [1 box required] 16mm thick
- 1 x Ferodo DS1.11 Endurance race pads - rear (D1718/D1854) [1 box required]
- 1 x StopTech Sport slotted & drilled front rotor 360x30mm, Right
- 1 x Posi Quiet semi-metallic brake pads - front (D1024) [1 box required]
- 1 x PFC08 race pads - front (D991) [1 box required] 65mm radial depth, 17mm thick
- 1 x Centric Premium front rotor 360x30mm (2 required)
- 1 x Centric Premium rear rotor 302x12mm (2 required)
- 1 x Hawk Performance Ceramic brake pads - rear (D1108) [1 box required]
- 1 x Caliper rebuild kit - rear (38mm piston) to rebuild one caliper UNAVAILABLE
- 1 x 28mm diameter StopTech caliper piston - 32mm length UNAVAILABLE
- 1 x Brake pad wear sensor for BMW - Front
- 1 x Ferodo DS3000 race pads - race caliper (FRP3144) [1 box required] 54mm radial depth, 18mm thick, no center eyelet - BACKORDERED
- 1 x StopTech Sport slotted & drilled rear rotor 260x12mm, Left
- 1 x Ferodo DS2500 race pads - front (D1598) [1 box required]
- 1 x Hawk HPS brake pads - front (D1024/D1117) [1 box required]
- 1 x Hawk Blue 9012 race pads - front (D409) [1 box required]
- 1 x Centric Premium High Carbon rear rotor 260x12mm (2 required)
- 1 x StopTech Sport slotted & drilled rear rotor 330x11mm, Left
- 1 x Porterfield R4 race pads - front (D592/D1053) (Special order) [1 box required]
- 1 x Hawk Blue 9012 race pads - front (D31/D58/D861) [1 box required]
- 1 x Ferodo DS1.11 Endurance race pads - rear (D1300) [1 box required] 17mm thick
- 1 x Porterfield R4 race pads - front (D423) (Special order) [1 box required]
- 1 x 34mm diameter StopTech caliper piston - 32mm length (20 in stock)
- 1 x Hawk Blue 9012 race pads - front (D431) [1 box required]
- 1 x Hawk HPS brake pads - race caliper (CP3905-D54) [1 box required] 18mm thick, no center eyelet
- 1 x Ferodo DS2500 race pads - for AP Racing calipers (CP2399-D43) [1 box required]
- 1 x 32mm diameter StopTech caliper piston - 29.5mm length UNAVAILABLE
- 1 x Pagid RSC1 Street/Race Pads for Ceramic Rotors - front (D1742) [1 box required]
- 1 x Hawk Blue 9012 race pads - front (D810/D968/D1383) [1 box required] 17mm thick
- 1 x Hawk HPS 5.0 brake pads - race caliper (CP3215-D42) [1 box required] 16.7mm thick
- 3 x Ferodo DS3.12 race pads - race caliper (FRP3144) [1 box required] 54mm radial depth, 18mm thick, no center eyelet
- 1 x Ferodo DS2500 race pads - front (D1001) [1 box required] 14.7mm thick, no sensor or damping weights
- 1 x Ferodo DS2500 race pads - race caliper (FRP3144) [1 box required] 54mm radial depth, 18mm thick, no center eyelet
- 1 x StopTech Sport 309-Series brake pads - race caliper (D1247-1, DR35) [1 box required] 59mm radial depth, 18mm thick
- 1 x Porterfield R4 race pads - front (D629) (Special order) [1 box required]
- 1 x 36mm Caliper Rebuild Kit - 2 Dust Boots & Pressure Seals for 36mm pistons
- 1 x Hawk Blue 9012 race pads - front (D1009) [1 box required]
- 1 x Porterfield R4-S high performance street pads - front (D1576) (Special order) [1 box required]
- 1 x Ferodo DS1.11 Endurance race pads - race caliper (CP2340-D51) [1 box required] 16mm thick
- 1 x Ferodo DSUNO race pads - race caliper (DR98) [1 box required] 20.4mm thick, 50mm radial depth
- 1 x Brake pad wear sensor for BMW - Front
- 1 x Ferodo DS1.11 Endurance race pads - front (D731) [1 box required]
- 1 x Centric Premium front rotor 298x28mm (2 required)
- 1 x Porterfield R4 race pads - front (D1081) (Special order) [1 box required]
- 1 x Posi Quiet Ceramic brake pads - front (D924) [1 box required]
- 1 x PFC Z-Rated high performance brake pads - rear (D109/D961) [1 box required]
- 1 x Posi Quiet Extended-Wear brake pads - rear (D1071) [1 box required]
- 1 x Posi Quiet semi-metallic brake pads - front (D1107) [1 box required] with sensor
- 1 x Pagid RSL29 Yellow Endurance Race Pads - front (D1371) [1 box required]
- 1 x Ferodo DS1.11 Endurance race pads - front (D1405) [1 box required] 16.5mm thick, no sensor
- 1 x Ferodo DS1.11 Endurance race pads - front (D345/D608) [1 box required] 18mm thick
- 1 x Hawk Blue 9012 race pads - front (D372/D447/D609) [1 box required]
- 1 x PFC Carbon Metallic brake pads - rear (D989) [1 box required]
- 1 x Porterfield R4 race pads - front (D1784) (Special order) [1 box required]
- 1 x Hawk DTC-30 race pads - front (D1001/D1016/D1050) [1 box required] 14.9mm thick, no sensor or damping weights
- 1 x PFC01 race pads - race caliper (DR17) 28mm thick, 62mm radial pad depth [1 box required]
- 1 x Posi Quiet semi-metallic brake pads - front (D1598) [1 box required]
- 1 x Brake pad wear sensor for Audi/Porsche/VW - Front
- 1 x Motul DOT 5.1 brake fluid (Case of 12 bottles) - 518 F dry, 369 F wet boiling point (1/2 liter)
- 1 x PFC08 race pads - front (D372/D609) [1 box required] 17mm thick
- 1 x Hawk DTC-70 race pads - race caliper (CP3215-D42) [1 box required] 16.6mm thick
- 1 x Brake pad wear sensor for Audi/Porsche/VW - Front
- 1 x Hawk DTC-70 race pads - race caliper (CP7600-D46) [1 box required] 16mm thick
- 1 x Posi Quiet Ceramic brake pads - front (D330) [1 box required] BACKORDERED
- 1 x Brake pad wear sensor for Audi/Porsche/VW - Front
- 1 x StopTech Sport slotted & drilled front rotor 360x30mm, Left
- 1 x Hawk DTC-70 race pads - front (D1598) [1 box required]
- 1 x PFC08 race pads - front (D278/D493) [1 box required]
- 1 x Brake pad wear sensor for Audi/Porsche/VW - Rear
- 1 x Ferodo DS1.11 Endurance race pads - front (D918) [1 box required] BACKORDERED
- 1 x Ferodo DS2500 race pads - race caliper (CP7600-D46) [1 box required] 16mm thick
- 1 x Brake pad wear sensor for Audi/Porsche/VW - Front
- 1 x StopTech Sport 309-Series brake pads - front (D1001) [1 box required] 14.9mm thick, no sensor or damping weights
- 1 x Ferodo DS1.11 Endurance race pads - rear (D1417) [1 box required]
- 1 x Hawk HP Plus brake pads - race caliper (CP3215D-50) [1 box required] 16.6mm thick
- 1 x Ferodo DS2500 race pads - race caliper (CP3894-D54) [1 box required] 18mm thick, center eyelet
- 1 x Porterfield R4 race pads - front (D1634) (Special order) [1 box required] 17mm thick
- 1 x PFC11 race pads - front (D31) [1 box required]
- 2 x Porterfield R4-S high performance street pads - race caliper (CP3894-D54) (Special Order) [1 box required] 18mm thick, center eyelet
- 1 x Porterfield R4 race pads - front (D138/D154/D202) (Special order) [1 box required]
- 1 x Porterfield R4 race pads - Brembo 6-piston monobloc caliper (49mm radial pad depth) (Special Order) [1 box required]
- 1 x Ferodo DS1.11 Endurance race pads - front (D1741) [1 box required]
- 1 x Hawk Blue 9012 race pads - race caliper (CP3215D-50) [1 box required] 16.6mm thick
- 2 x Pagid RSL1 Yellow Endurance Race Pads - race caliper (D3215D-50) [1 box required] 17mm thick
- 1 x Disc brake hardware kit - Rear (1 set required)
- 2 x Ferodo DS3.12 race pads - race caliper (CP3215D-50) [1 box required] 16.6mm thick
- 1 x Pagid RSL1 Yellow Endurance Race Pads - rear (D1740) [1 box required]
- 1 x PFC11 race pads - OEM Brembo (D592/D1053) [1 box required] 15mm thick
- 1 x Hawk HPS brake pads - front (D1001/D1016/D1050) [1 box required] 14.9mm thick, no sensor or damping weights
- 1 x Hawk Blue 9012 race pads - front (D57/D114/D161) [1 box required]
- 1 x StopTech Sport slotted & drilled rear rotor 314x20mm, Left
- 1 x Hawk Blue 9012 race pads - front (D227/D290/D684/D696) [1 box required] 18.5mm thick, no sensor
- 1 x Ferodo DS1.11 Endurance race pads - StopTech ST-40 caliper (D372/D609) [1 box required] 18mm thick
- 1 x Porterfield R4 race pads - front (D358) (Special order) [1 box required]
- 1 x Hawk Blue 9012 race pads - Brembo 6-piston monobloc caliper (narrow annulus - 49mm)
- 1 x Hawk Blue 9012 race pads - front (D294) [1 box required]
- 1 x Brake pad wear sensor for Audi/Porsche/VW - Front
- 1 x Brake pad wear sensor for BMW
- 1 x Hawk Performance Ceramic brake pads - rear (D340) [1 box required] 15mm thick
- 1 x Pagid RSL29 Yellow Endurance Race Pads - front (D737) [1 box required]
- 1 x Ferodo DS2500 race pads - race caliper (FRP3014) [1 box required] 54mm radial depth, 25mm thick, no center eyelet
- 1 x Hawk DTC-60 race pads - front (D227/D290/D684/D696/D780) [1 box required] 18.5mm thick, no sensor
- 1 x Brake pad wear sensor for BMW - Front
- 1 x Hawk Blue 9012 race pads - front (D621/D948) [1 box required]
- 1 x Brake pad wear sensor for BMW - Front
- 1 x Porterfield R4 race pads - front (D1291) (Special order) [1 box required]
- 1 x Ferodo DS2500 race pads - fits Alcon PNF4498x603 - Monobloc 4-piston caliper
- 1 x PFC Z-Rated high performance brake pads - front (D1316) [1 box required]
- 1 x StopTech Sport drilled front rotor 360x30mm, Left
- 1 x Hawk DTC-30 race pads - race caliper (CP3215D-50) [1 box required] 16.6mm thick
- 1 x Porterfield R4 race pads - front (D619) (Special order) [1 box required]
- 1 x Brake pad wear sensor for BMW - Front
- 1 x Brake pad wear sensor for BMW - Front
- 1 x StopTech Sport slotted & drilled front rotor 303x28mm, Right
- 1 x PFC11 race pads - front (D960) [1 box required]
- 1 x Ferodo DS1.11 Endurance race pads - front (D1609) [1 box required] 18mm thick
- 1 x Hawk DTC-60 race pads - race caliper (CP3558-D54) [1 box required] 25mm thick, no center eyelet
- 1 x StopTech Sport drilled front rotor 288x25mm, Left
- 1 x PFC11 race pads - front (D44) [1 box required]
- 1 x Porterfield R4 race pads - front (D1835) (Special order) [1 box required]
- 1 x Brake pad wear sensor for Audi/Porsche/VW - Front
- 1 x Hawk DTC-80 race pads - front (D1001/D1016/D1050) [1 box required] 14.9mm thick, no sensor or damping weights
- 1 x StopTech Sport drilled rear rotor 260x12mm, Left
- 1 x Hawk Blue 9012 race pads - front (D1454) [1 box required] 14.4mm thick
- 1 x 1-Piece 380x32mm AeroRotor Slotted, Right (Fits 82-198-006S)
- 1 x Brake pad wear sensor for BMW - Front
- 1 x Pagid RS14 Black Race Pads - StopTech ST-40 caliper (D372/D609) [1 box required] 18mm thick, SPECIAL ORDER
- 1 x 30mm diameter StopTech caliper piston - 29.5mm length (40 in stock)
- 1 x Porterfield R4 race pads - front (D598) (Special order) [1 box required]
- 1 x Brake pad wear sensor for Audi/Porsche/VW - Front
- 1 x StopTech Sport slotted front rotor 384x36mm, Right
- 1 x Posi Quiet Ceramic brake pads - front (D1070) [1 box required]
- 1 x Pagid RSL29 Yellow Endurance Race Pads - front (D1648) [1 box required] BACKORDERED
- 1 x Castrol React SRF brake fluid - 590 F dry, 518 F wet boiling (1 Liter)
- 1 x Pagid RSC1 Street/Race Pads for Ceramic Rotors - front (D991) [1 box required]
- 1 x Ferodo DS1.11 Endurance race pads - front (D916) [1 box required]
- 1 x PFC08 race pads - front (D345/D608) [1 box required]
- 1 x Centric Premium High Carbon front rotor 288x25mm (2 required)
- 1 x StopTech Sport slotted front rotor 303x28mm, Left
- 1 x Porterfield R4 race pads - front (D1801) (Special order) [1 box required]
- 1 x Pagid RS14 Black Race Pads - OEM Brembo (D592/D1053) [1 box required] 15mm thick
- 1 x Hawk HPS 5.0 brake pads - rear (D1108) [1 box required]
- 1 x Brake pad wear sensor for BMW - Front
- 1 x StopTech Sport slotted front rotor 280x22mm, Right
- 1 x Hawk Blue 9012 race pads - race caliper (DR22) 15.2mm thick
- 1 x Hawk Blue 9012 race pads - front (D345/D446/D608) [1 box required]
- 1 x Porterfield R4-S high performance street pads - rear (D1284) (Special order) [1 box required]
- 1 x Posi Quiet semi-metallic brake pads - rear (D1018) [1 box required]
- 1 x Hawk Blue 9012 race pads - front (D76) [1 box required]
- 1 x Ferodo DS1.11 Endurance race pads - front (D1204) [1 box required] BACKORDERED
- 1 x Hawk Blue 9012 race pads - front (D241/D242/D302/D356/D539/D570) [1 box required]
- 1 x Posi Quiet semi-metallic brake pads - rear (D1001) [1 box required] 14.9mm thick, no sensor slot or damping weights
- 1 x Ferodo DS1.11 Endurance race pads - rear (D776/D917/D1135) [1 box required] may not accommodate sensor
- 1 x Posi Quiet semi-metallic brake pads - front (D780) [1 box required]
- 1 x Pagid RSL29 Yellow Endurance Race Pads - front (D1598) [1 box required]
- 1 x Pagid RS14 Black Race Pads - rear (D738/D1134) [1 box required]
- 1 x Hawk Blue 9012 race pads - front (D158/D206/D280/D307/D569) [1 box required]
- 1 x Brake pad wear sensor for Audi/Porsche/VW - Rear
- 1 x Posi Quiet semi-metallic brake pads - front (D1001) [1 box required] 14.9mm thick, no sensor or damping weights
- 1 x Ferodo DS1.11 Endurance race pads - front (D737) [1 box required] may not accommodate sensor
- 1 x Ferodo DS1.11 Endurance race pads - front (D915-2) [1 box required] BACKORDERED
- 1 x Hawk HP Plus brake pads - rear (D340) [1 box required] 15mm thick
- 1 x Hawk HPS brake pads - rear (D1018) [1 box required]
- 1 x Hawk Blue 9012 race pads - race caliper (CP2340-D43) [1 box required] 16mm thick
- 1 x Hawk Blue 9012 race pads - front (D43) [1 box required]
- 1 x Brake pad wear sensor for Audi/Porsche/VW - Rear
- 1 x Brake pad wear sensor for Audi/Porsche/VW - Rear
- 1 x Hawk Blue 9012 race pads - front (D558) [1 box required]
- 1 x Hawk Blue 9012 race pads - front (D273/D474/D560) [1 box required]
- 1 x StopTech Sport 309-series brake pads - rear (D1001) [1 box required] 14.9mm thick, no sensor or damping weights
- 1 x Ferodo DS1.11 Endurance race pads - rear (D1599) [1 box required]
- 1 x Porterfield R4 race pads - front (D737) (Special order) [1 box required]
- 1 x PFC11 race pads - front (D776/D917/D993/D1135) [1 box required] does not accommodate sensor
- 1 x StopTech Sport 309-Series brake pads - rear (D1018) [1 box required]
- 1 x Pagid RS14 Black Race Pads - front (D991) [1 box required]
- 1 x Ferodo DS2500 race pads - front (D227/D684/D780) [1 box required]
- 1 x Brake pad wear sensor for BMW - Front
- 1 x Ferodo DS3.12 race pads - race caliper (FRP3014) [1 box required] 54mm radial depth, 25mm thick, no center eyelet
- 1 x Hawk HPS 5.0 brake pads - front (D1001/D1016/D1050) [1 box required] 14.9mm thick, no sensor or damping weights
- 1 x Pagid RSC1 Street/Race Pads for Ceramic Rotors - rear (D810/D968) [1 box required] no sensor slot
- 1 x Pagid RSL1 Yellow Endurance Race Pads - front (D776/D917/D993/D1135) [1 box required] Special Order
- 1 x StopTech Sport drilled rear rotor 314x20mm, Right
- 1 x Hawk Performance Ceramic brake pads - front (D227/D290/D684/D696) [1 box required] 15.5mm thick, with sensor
- 1 x Pagid RSL29 Yellow Endurance Race Pads - front (D1637) [1 box required] 17mm thick
- 1 x PFC11 race pads - Front (DR770-20) 20mm thick [1 box required]
- 1 x PFC Carbon Metallic brake pads - rear (D932) [1 box required]
- 1 x Pagid RSL29 Yellow Endurance Race Pads - front (D1609) [1 box required] 17.5mm thick
- 1 x Hawk DTC-60 race pads - race caliper (CP3215D-50) [1 box required] 16.6mm thick
- 1 x Brake pad wear sensor for Audi/Porsche/VW - Rear
- 1 x Caliper rebuild kit - front (54mm piston) to rebuild one caliper UNAVAILABLE
- 1 x Pagid RSC1 Street/Race Pads for Ceramic Rotors - front (D1395) [1 box required]
- 1 x Porterfield R4 race pads - front (D1894) (Special order) [1 box required] 14.6mm thick
- 1 x PFC Carbon Metallic brake pads - front (D784) [1 box required]
- 1 x StopTech Sport slotted & drilled front rotor 315x28mm, Right
- 1 x Ferodo DS1.11 Endurance race pads - front (D1664) [1 box required]
- 1 x Brake pad wear sensor for BMW - Front
- 1 x Hawk DTC-60 race pads - race caliper (CP3905-D54) [1 box required] 18mm thick, no center eyelet
- 1 x Porterfield R4 race pads - race caliper (CP3894-D54) (Special Order) [1 box required] 18mm thick, center eyelet
- 1 x Porterfield R4 race pads - front (D1155) (Special order) [1 box required]
- 1 x Porterfield R4 race pads - front (D1575) (Special order) [1 box required]
- 1 x Hawk DTC-60 race pads - front (D1001/D1016/D1050) [1 box required] 14.9mm thick, no sensor or damping weights
- 1 x Brake pad wear sensor for Audi/Porsche/VW - Front
- 1 x StopTech Sport slotted rear rotor 330x11mm, Right
- 1 x Porterfield R4 race pads - front (D31) (Special order) [1 box required]
- 1 x Ferodo DS1.11 Endurance race pads - race caliper (CP7040-D61) [1 box required] 16.9mm thick
- 1 x Hawk Blue 9012 race pads - front (D61) [1 box required]
- 1 x PFC01 race pads - front (D1001) [1 box required] 15mm thick, no sensor or damping weights
- 1 x PFC Carbon Metallic brake pads - front (D931) [1 box required]
- 1 x PFC08 race pads - race caliper (CP3558-D54) 25mm thick, includes center eyelet
- 1 x Pagid RSC1 Street/Race Pads for Ceramic Rotors - OEM Brembo (D810/D968) [1 box required] 18mm thick
- 1 x Hawk HP Plus brake pads - front (D1001/D1016/D1050) [1 box required] 14.9mm thick, no sensor or damping weights
$144,294.05
Quick Links