Gen4 Calipers<br><small>w/o Abutment Blocks</small>, Zeckhausen Racing

Monday - Friday

10AM - 5PM

ST-60 Gen4 Exploded Parts Diagram

Item #	Description	Part # (for 32mm width calipers)	Part # (for 35mm width calipers)
1	Bridge Bolt	40.6B0.6095	40.6B0.6097
2	Bridge Bolt Washer	40.220.0002	40.220.0002
3	ST-60 Bridge (Red)	32.639.N107	32.649.N107
	ST-60 Bridge (Black)	32.639.N105	32.649.N105
	ST-60 Bridge(Silver)	32.639.N106	32.649.N106
	ST-60 Bridge (Blue)	32.639.N102	32.649.N102
	ST-60 Bridge (Yellow)	32.639.N108	32.649.N108
4	TIME-SERT M6x1.0	40.160.0001	40.160.0001
5	Bleed Screw	41.000.0011	41.000.0011
6	Bleed Screw Cap	780.09450	780.09450
7	Crossover Tube	41.400.0105	41.400.0106
8	Abutment Plate Kit	89.030.0012	89.030.0012
9	Body Bolt, M10x80	40.6B1.0080	40.6B1.0080
10	Body Bolt, M10x75	40.6B1.0075	40.6B1.0075
11	Body Bolt, M10x70	40.6B1.0070	40.6B1.0070
12	Body Bolt Washer, M10	40.220.0003	40.220.0003

StopTech ST-60 Gen4 calipers use application-specific piston sizing, with pistons ranging in diameter from 26mm to 46mm. These are typically staggered, with larger trailing pistons used. Thus, pistons are NOT all the same size. ST-60 Gen4 calipers use "tall" pistons, 32mm in length. Pressure Seals (#13), Pistons (#14), and Dust Boots (#15) may be ordered here: Rebuild Parts

Brake pads may be ordered here: ST-60 Pads

All other ST-60 Gen4 hardware is listed below.

Displaying 1 to 3 (of 3 products)