Displaying 1 to 61 (of 61 products)
Brake pad wear sensor, Length = 28.25 inches…
- Manufacturer
- Centric
- Model
- 64-116-34018
Brake pad wear sensor, Length = 55.5 inches…
- Manufacturer
- Centric
- Model
- 64-116-34015
Caliper rebuild kit - front (57mm piston) consisting of one dust boot and pressure seal to rebuild one caliper. May…
- Manufacturer
- Centric
- Model
- 143.34022
Caliper rebuild kit - rear (42mm piston) consisting of one dust boot and pressure seal to rebuild one caliper. May…
- Manufacturer
- Centric
- Model
- 143.34021
Centric Premium High Carbon front 325x25mm 1-piece vented rotor…
- Manufacturer
- Centric
- Model
- 125.34052
Centric Premium High Carbon rear 320x22mm 1-piece vented rotor…
- Manufacturer
- Centric
- Model
- 125.34057
Hardware kit consisting of parts for two brake calipers…
- Manufacturer
- Centric
- Model
- 117.34005
Hardware kit consisting of parts for two brake calipers…
- Manufacturer
- Centric
- Model
- 117.34013
Ferodo DS1.11 Race pads have a very high coefficient of friction only slightly lower than DS3000, but with drastically longer…
- Manufacturer
- Ferodo
- Model
- 63-390-0946
Ferodo DS1.11 Race pads have a very high coefficient of friction only slightly lower than DS3000, but with drastically longer…
- Manufacturer
- Ferodo
- Model
- 63-390-0683
Ferodo DS2500 Club Race pads can be used on the street and for light to medium track duty. Good cold…
- Manufacturer
- Ferodo
- Model
- 63-360-0946
Ferodo DS2500 Club Race pads can be used on the street and for light to medium track duty. Good cold…
- Manufacturer
- Ferodo
- Model
- 63-360-0683
Hawk Blue 9012 Race pads have a stable torque curve, good bite, and a MOT of 1,050 degrees F. Low…
- Manufacturer
- Hawk
- Model
- 63-450-0946
Hawk Blue 9012 Race pads have a stable torque curve, good bite, and a MOT of 1,050 degrees F. Low…
- Manufacturer
- Hawk
- Model
- 63-450-0683
Hawk DTC-50 is a member of the Dynamic Torque Control race pad family with torque output significantly higher than DTC-60…
- Manufacturer
- Hawk
- Model
- 63-465-0946
Hawk DTC-60 is a member of the Dynamic Torque Control race pad family, similar to DTC-70, but less initial bite,…
- Manufacturer
- Hawk
- Model
- 63-470-0946
Hawk DTC-60 is a member of the Dynamic Torque Control race pad family, similar to DTC-70, but less initial bite,…
- Manufacturer
- Hawk
- Model
- 63-470-0683
Hawk DTC-70 is a member of the Dynamic Torque Control race pad family, with an average level of friction among…
- Manufacturer
- Hawk
- Model
- 63-480-0946
Hawk DTC-70 is a member of the Dynamic Torque Control race pad family, with an average level of friction among…
- Manufacturer
- Hawk
- Model
- 63-480-0683
Hawk ER-1 Endurance Racing Brake Pads offer a higher coefficient of friction than competing endurance pads, while maintaining matched or…
- Manufacturer
- Hawk
- Model
- 63-486-0946
Hawk ER-1 Endurance Racing Brake Pads offer a higher coefficient of friction than competing endurance pads, while maintaining matched or…
- Manufacturer
- Hawk
- Model
- 63-486-0683
Hawk HP PLUS high performance street pads have moderate dust, moderate rotor wear, high initial bite and a Maximum Operating…
- Manufacturer
- Hawk
- Model
- 63-420-0946
Hawk HP PLUS high performance street pads have moderate dust, moderate rotor wear, high initial bite and a Maximum Operating…
- Manufacturer
- Hawk
- Model
- 63-420-0683
Hawk HPS 5.0 high performance street pads produce higher bite and better pedal feel than Hawk HPS, with even lower…
- Manufacturer
- Hawk
- Model
- 63-411-0946
Hawk HPS 5.0 high performance street pads produce higher bite and better pedal feel than Hawk HPS, with even lower…
- Manufacturer
- Hawk
- Model
- 63-411-0683
Hawk HPS high performance street pads have low dust, low noise, and low rotor wear. Slightly higher in friction level…
- Manufacturer
- Hawk
- Model
- 63-410-0946
Hawk HPS high performance street pads have low dust, low noise, and low rotor wear. Slightly higher in friction level…
- Manufacturer
- Hawk
- Model
- 63-410-0683
Hawk HT-10 Race pads have intermediate to high torque, with smooth initial bite, making them ideal for the weekend warrior.…
- Manufacturer
- Hawk
- Model
- 63-490-0946
Hawk HT-10 Race pads have intermediate to high torque, with smooth initial bite, making them ideal for the weekend warrior.…
- Manufacturer
- Hawk
- Model
- 63-490-0683
Hawk LTS Light Truck & SUV pads are designed for full-sized trucks, SUVs and vans. These are relatively low dust…
- Manufacturer
- Hawk
- Model
- 63-500-0946
Hawk LTS Light Truck & SUV pads are designed for full-sized trucks, SUVs and vans. These are relatively low dust…
- Manufacturer
- Hawk
- Model
- 63-500-0683
Hawk Performance Ceramic street pads have extremely low dust, low noise, and low rotor wear. These represent the latest technology…
- Manufacturer
- Hawk
- Model
- 63-443-0946
Hawk Performance Ceramic street pads have extremely low dust, low noise, and low rotor wear. These represent the latest technology…
- Manufacturer
- Hawk
- Model
- 63-443-0683
Pagid RSL29 is an endurance race pad based on (and replacing) the popular RSL19, with similar friction levels, slightly higher…
- Manufacturer
- Pagid
- Model
- 63-910-0394
Pagid RSL29 is an endurance race pad based on (and replacing) the popular RSL19, with similar friction levels, slightly higher…
- Manufacturer
- Pagid
- Model
- 63-910-0683
Performance Friction (PFC) Z-rated pads can be used for daily driving as well as light to medium duty track use.…
- Manufacturer
- Performance Friction
- Model
- 63-700-0394
Performance Friction (PFC) Z-rated pads can be used for daily driving as well as light to medium duty track use.…
- Manufacturer
- Performance Friction
- Model
- 63-700-0683
Performance Friction 08 Race pads have smooth initial bite, with torque rising slightly over its operating temperature range, and a…
- Manufacturer
- Performance Friction
- Model
- 63-680-0394
Performance Friction 08 Race pads have smooth initial bite, with torque rising slightly over its operating temperature range, and a…
- Manufacturer
- Performance Friction
- Model
- 63-680-0683
Performance Friction 11 Race pads were developed from the legendary PFC 01 compound, with improvements to bite, modulation, and release…
- Manufacturer
- Performance Friction
- Model
- 63-661-0394
Performance Friction 11 Race pads were developed from the legendary PFC 01 compound, with improvements to bite, modulation, and release…
- Manufacturer
- Performance Friction
- Model
- 63-661-0683
Porterfield R4-S High Performance Street and Autocross pads are designed for heavy-duty street driving, with better fade resistance and lower…
- Manufacturer
- Porterfield
- Model
- AP946-R4S
Porterfield R4-S High Performance Street and Autocross pads are designed for heavy-duty street driving, with better fade resistance and lower…
- Manufacturer
- Porterfield
- Model
- AP683-R4S
Centric Posi Quiet Ceramic pads offer extremely long pad life and are Centric's lowest dust pads, keeping wheels cleaner longer.…
- Manufacturer
- Centric
- Model
- 63-105-0946
Centric Posi Quiet Ceramic pads offer extremely long pad life and are Centric's lowest dust pads, keeping wheels cleaner longer.…
- Manufacturer
- Centric
- Model
- 63-105-0683
Centric Posi Quiet Semi-Metallic pads offer high friction and initial bite across a wide temperature range. Low dust, low noise…
- Manufacturer
- Centric
- Model
- 63-104-0946
Centric Posi Quiet Semi-Metallic pads offer high friction and initial bite across a wide temperature range. Low dust, low noise…
- Manufacturer
- Centric
- Model
- 63-104-0683
StopTech stainless steel braided brake linesImprove pedal feel by replacing stock rubber lines with stainless…
- Manufacturer
- StopTech
- Model
- 950.34005
StopTech stainless steel braided brake linesImprove pedal feel by replacing stock rubber lines with stainless…
- Manufacturer
- StopTech
- Model
- 950.34505
StopTech Sport brake pads offer a combination of high bite, low noise, medium dust, and sufficient operating temperature range to…
- Manufacturer
- StopTech
- Model
- 63-309-0946
StopTech Sport brake pads offer a combination of high bite, low noise, medium dust, and sufficient operating temperature range to…
- Manufacturer
- StopTech
- Model
- 63-309-0683
StopTech Sport drilled left front 325x25mm 1-piece vented rotor…
- Manufacturer
- StopTech
- Model
- 128.34052L
StopTech Sport drilled right front 325x25mm 1-piece vented rotor…
- Manufacturer
- StopTech
- Model
- 128.34052R
StopTech Sport drilled left rear 320x22mm 1-piece vented rotor…
- Manufacturer
- StopTech
- Model
- 128.34057L
StopTech Sport slotted & drilled left front 325x25mm 1-piece vented rotor…
- Manufacturer
- StopTech
- Model
- 127.34052L
StopTech Sport slotted & drilled right front 325x25mm 1-piece vented rotor…
- Manufacturer
- StopTech
- Model
- 127.34052R
StopTech Sport slotted & drilled left rear 320x22mm 1-piece vented rotor…
- Manufacturer
- StopTech
- Model
- 127.34057L
StopTech Sport slotted left front 325x25mm 1-piece vented rotor…
- Manufacturer
- StopTech
- Model
- 126.34052SL
StopTech Sport slotted right front 325x25mm 1-piece vented rotor…
- Manufacturer
- StopTech
- Model
- 126.34052SR
StopTech Sport slotted left rear 320x22mm 1-piece vented rotor…
- Manufacturer
- StopTech
- Model
- 126.34057SL
StopTech Sport slotted left rear 320x22mm 1-piece vented rotor…
- Manufacturer
- StopTech
- Model
- 126.34057SR
Displaying 1 to 61 (of 61 products)