JavaScript seems to be disabled in your browser.

You must have JavaScript enabled in your browser to utilize the functionality of this website. Click here for instructions on enabling javascript in your browser.

Brake pads compatible with 
Brembo® GT1/F40/F50 Calipers

Pads listed here replace the following Brembo pad part numbers:

07.4865.1
07.4865.80
07.8301.61
07.8645.16

FMSI D810, D968, D1383 pads for Brembo calipers

Unless otherwise specified, most of the pads listed below do NOT have a pad wear sensor slot.

Show: 

Result Pages:
Girodisc titanium thermal shield kit for Brembo GT1/F40/F50 calipers in D810 shape

Girodisc titanium thermal shield kit for Brembo GT1/F40/F50 calipers in D810 shape

Kit includes 4 titanium shims for Brembo GT1/F40/F50 calipers (D810 pad shape). These shims reduce heat transfer into the…

Manufacturer
Girodisc
Model
TS-0810-4
Brembo anti-rattle pad retaining spring for GT1/F40/F50 4-piston caliper BACKORDERED

Brembo anti-rattle pad retaining spring for GT1/F40/F50 4-piston caliper BACKORDERED

Brembo anti-rattle pad retaining spring for Brembo GT1/F40/F50 4-piston Gran Turismo big brake kit caliper. Sold individually and may only…

Manufacturer
Brembo
Model
20419676
Brembo pad pin retaining clip - BACKORDERED

Brembo pad pin retaining clip - BACKORDERED

Brembo pad pin retaining clip. Clips into hole at the tip of pad pin to prevent it from backing out…

Manufacturer
Brembo
Model
05454227
Brembo pad retaining pin for GT1/F40/F50 4-piston calipers BACKORDERED

Brembo pad retaining pin for GT1/F40/F50 4-piston calipers BACKORDERED

Brembo pad retaining pin for GT1/F40/F50 4-piston calipers. Sold individually, two pins required per caliper and may only be…

Manufacturer
Brembo
Model
20490850
Ferodo DS1.11 Endurance race pads - OEM Brembo (D810/D968) [1 box required] sensor slot, 18mm thick

Ferodo DS1.11 Endurance race pads - OEM Brembo (D810/D968) [1 box required] sensor slot, 18mm thick

Ferodo DS1.11 Race pads have a very high coefficient of friction only slightly lower than DS3000, but with drastically longer…

Manufacturer
Ferodo
Model
63-390-0810
Ferodo DS2500 race pads - OEM Brembo (D810/D968) [1 box required] sensor slot, 18mm thick

Ferodo DS2500 race pads - OEM Brembo (D810/D968) [1 box required] sensor slot, 18mm thick

Ferodo DS2500 Club Race pads can be used on the street and for light to medium track duty. Good cold…

Manufacturer
Ferodo
Model
63-360-0810
Ferodo DS3.12 race pads - OEM Brembo (D810/D968) [1 box required] sensor slot, 18mm thick

Ferodo DS3.12 race pads - OEM Brembo (D810/D968) [1 box required] sensor slot, 18mm thick

Ferodo DS3.12 Race pads have the highest coefficient of friction and fade resistance of any Ferodo compounds. Stable performance up…

Manufacturer
Ferodo
Model
63-393-0810
Hawk Blue 9012 race pads - OEM Brembo (D810/D968/D1383) [1 box required] 17mm thick

Hawk Blue 9012 race pads - OEM Brembo (D810/D968/D1383) [1 box required] 17mm thick

Hawk Blue 9012 Race pads have a stable torque curve, good bite, and a MOT of 1,050 degrees F. Low…

Manufacturer
Hawk
Model
63-450-0810
Hawk DTC-30 race pads -  OEM Brembo (D810/D968/D1383) [1 box required] 17mm thick

Hawk DTC-30 race pads - OEM Brembo (D810/D968/D1383) [1 box required] 17mm thick

Hawk DTC-30 is a member of the Dynamic Torque Control (DTC) race pad family and is suggested for light to…

Manufacturer
Hawk
Model
63-430-0810
Hawk DTC-60 race pads - OEM Brembo (D810/D968/D1383) [1 box required] 17mm thick

Hawk DTC-60 race pads - OEM Brembo (D810/D968/D1383) [1 box required] 17mm thick

Hawk DTC-60 is a member of the Dynamic Torque Control race pad family, similar to DTC-70, but less initial bite,…

Manufacturer
Hawk
Model
63-470-0810
Hawk DTC-70 race pads - OEM Brembo (D810/D968/D1383) [1 box required] 17mm thick

Hawk DTC-70 race pads - OEM Brembo (D810/D968/D1383) [1 box required] 17mm thick

Hawk DTC-70 is a member of the Dynamic Torque Control race pad family, with an average level of friction among…

Manufacturer
Hawk
Model
63-480-0810
Hawk ER-1 endurance race pads - OEM Brembo (D810/D968/D1383) [1 box required] 17mm thick

Hawk ER-1 endurance race pads - OEM Brembo (D810/D968/D1383) [1 box required] 17mm thick

Hawk ER-1 Endurance Racing Brake Pads offer a higher coefficient of friction than competing endurance pads, while maintaining matched or…

Manufacturer
Hawk
Model
63-486-0810
Hawk HP Plus brake pads - OEM Brembo (D810/D968/D1383) [1 box required] 17mm thick

Hawk HP Plus brake pads - OEM Brembo (D810/D968/D1383) [1 box required] 17mm thick

Hawk HP PLUS high performance street pads have moderate dust, moderate rotor wear, high initial bite and a Maximum Operating…

Manufacturer
Hawk
Model
63-420-0810
Hawk HPS 5.0 brake pads - OEM Brembo (D810/D968/D1383) [1 box required] 17mm thick

Hawk HPS 5.0 brake pads - OEM Brembo (D810/D968/D1383) [1 box required] 17mm thick

Hawk HPS 5.0 high performance street pads produce higher bite and better pedal feel than Hawk HPS, with even lower…

Manufacturer
Hawk
Model
63-411-0810
Hawk HPS brake pads - OEM Brembo (D810/D968/D1383) [1 box required] 17mm thick

Hawk HPS brake pads - OEM Brembo (D810/D968/D1383) [1 box required] 17mm thick

Hawk HPS high performance street pads have low dust, low noise, and low rotor wear. Slightly higher in friction level…

Manufacturer
Hawk
Model
63-410-0810
Hawk HPX Autocross pads - OEM Brembo (D810/D968/D1383) [1 box required] 17mm thick

Hawk HPX Autocross pads - OEM Brembo (D810/D968/D1383) [1 box required] 17mm thick

Hawk HPX Race pads are engineered specifically for autocross competition with smooth, predictable initial bite from cold starts, clean modulation,…

Manufacturer
Hawk
Model
63-412-0810
Hawk Performance Ceramic brake pads - OEM Brembo (D810/D968/D1383) [1 box required] 17mm thick

Hawk Performance Ceramic brake pads - OEM Brembo (D810/D968/D1383) [1 box required] 17mm thick

Hawk Performance Ceramic street pads have extremely low dust, low noise, and low rotor wear. These represent the latest technology…

Manufacturer
Hawk
Model
63-443-0810
PFC Z-Rated high performance brake pads - OEM Brembo (D810/D968/D1383) [1 box required] 18mm thick

PFC Z-Rated high performance brake pads - OEM Brembo (D810/D968/D1383) [1 box required] 18mm thick

Performance Friction (PFC) Z-rated pads can be used for daily driving as well as light to medium duty track use.…

Manufacturer
Performance Friction
Model
63-700-0810
PFC08 race pads - OEM Brembo (D810/D968/D1383) [1 box required] 18mm thick

PFC08 race pads - OEM Brembo (D810/D968/D1383) [1 box required] 18mm thick

Performance Friction 08 Race pads have smooth initial bite, with torque rising slightly over its operating temperature range, and a…

Manufacturer
Performance Friction
Model
63-680-0810
Porterfield R4-S high performance street pads OEM Brembo (D810/D968) (Special order) [1 box required] 17.5mm thick

Porterfield R4-S high performance street pads OEM Brembo (D810/D968) (Special order) [1 box required] 17.5mm thick

Porterfield R4-S High Performance Street and Autocross pads are designed for heavy-duty street driving, with better fade resistance and lower…

Manufacturer
Porterfield
Model
AP810-R4S
Result Pages: