Application note: Beginning August 1972, the Porsche 914 was equipped with front calipers capable of holding pads up to 18mm thick. Before that, pad thickness was limited to 14mm. The Friction Materials Standards Intitute (FMSI) designated a new number for this thicker pad, calling it D96, while the older, thinner pad is called D31. Only a handful of aftermarket pad manufacturers, such as Centric Parts and Porterfield, offer the thicker pad variant. Thus, both designations (D31 and D96) appear below. Other than thickness, D31 and D96 pads are identical.
Displaying 1 to 18 (of 18 products)
Centric Premium rear 282x9.5mm 1-piece solid rotor…
- Manufacturer
- Centric
- Model
- 120.37003
Ferodo DS2500 Club Race pads can be used on the street and for light to medium track duty. Good…
- Manufacturer
- Ferodo
- Model
- 63-360-0031
Ferodo DS2500 Club Race pads can be used on the street and for light to medium track duty. Good cold…
- Manufacturer
- Ferodo
- Model
- 63-360-0030
Hawk Blue 9012 Race pads have a stable torque curve, good bite, and a MOT of 1,050 degrees F. …
- Manufacturer
- Hawk
- Model
- 63-450-0031
Hawk DTC-30 is a member of the Dynamic Torque Control (DTC) race pad family and is suggested for light to…
- Manufacturer
- Hawk
- Model
- 63-430-0031
Hawk DTC-60 is a member of their new Dynamic Torque Control race pad family with similar characteristics to DTC-70, but…
- Manufacturer
- Hawk
- Model
- 63-470-0031
Hawk DTC-70 is the most serious member of their new Dynamic Torque Control race pad family, with an average level…
- Manufacturer
- Hawk
- Model
- 63-480-0031
Hawk HP PLUS high performance street pads have moderate dust, moderate rotor wear, very high initial bite and similar MOT…
- Manufacturer
- Hawk
- Model
- 63-420-0031
Hawk HT-10 Race pads have intermediate to high torque, with smooth initial bite, making them ideal for the weekend warrior.…
- Manufacturer
- Hawk
- Model
- 63-490-0031
Hawk Performance Ceramic street pads have extremely low dust, low noise, and low rotor wear. These represent the latest…
- Manufacturer
- Hawk
- Model
- 63-443-0031
Pagid RS29 is an endurance race pad based on (and replacing) the popular RS19, with similar friction levels, slightly higher…
- Manufacturer
- Pagid
- Model
- 63-910-0031
Performance Friction 11 Race pads were developed from the legendary PFC 01 compound, with improvements to bite, modulation, and release…
- Manufacturer
- Performance Friction
- Model
- 63-661-0031
Porterfield R4 Full Race pads are extremely rotor friendly, with consistent modulation throughout their temperature range. The Carbon Kevlar material…
- Manufacturer
- Porterfield
- Model
- AP31T-R4
Porterfield R4 Full Race pads are extremely rotor friendly, with consistent modulation throughout their temperature range. The Carbon Kevlar material…
- Manufacturer
- Porterfield
- Model
- AP30-R4
Porterfield R4-S High Performance Street and Autocross pads are designed for heavy-duty street driving, with better fade resistance and lower…
- Manufacturer
- Porterfield
- Model
- AP31T-R4S
Porterfield R4-S High Performance Street and Autocross pads are designed for heavy-duty street driving, with better fade resistance and lower…
- Manufacturer
- Porterfield
- Model
- AP30-R4S
Centric Posi Quiet Ceramic pads offer extremely long pad life and are Centric's lowest dust pads, keeping wheels cleaner longer.…
- Manufacturer
- Centric
- Model
- 63-105-0096
Centric Posi Quiet Ceramic pads offer extremely long pad life and are Centric's lowest dust pads, keeping wheels cleaner longer.…
- Manufacturer
- Centric
- Model
- 63-105-0030
Displaying 1 to 18 (of 18 products)